GRAUPNER X-8E, S1008 User Manual
USA
No. S1008
4 channel HoTT 2.4 GHz transmitter
X-8E
Manual
Copyright © Graupner/SJ GmbH
2 / 48
S1008_X-8E_jh_V1
3 / 48
S1008_X-8E_jh_V1
Index
Introduction ..........................................................................5
Service Center .....................................................................5
Intended Use ........................................................................6
Package Content .................................................................6
Technical Data .....................................................................7
Declaration of Conformity ..................................................7
Symbols Explication ............................................................8
Safety Notes .........................................................................8
For your safety by handling the battery ................................9
Control Elements and Connections .................................11
Buttons and Switches Layout ..........................................11
Commissioning ..................................................................12
Battery connection ............................................................12
Battery charging ................................................................12
Transmitter power switch ..................................................12
Tension Spring Adjustment ..............................................13
Adjusting Steering Wheel Position ..................................13
Converting the Steering Wheel for Left-Handers ...........14
Installing the Steering Wheel Adapter .............................15
RF SET ................................................................................16
Binding .............................................................................16
Channel features (CH FUNCTION) .....................................17
Range test ........................................................................18
Start Display .......................................................................19
Main Menu ..........................................................................21
H/W SET .............................................................................21
TELE. (Telemetry Menu) ....................................................22
Setting & Data View ..........................................................22
RF Status View..................................................................22
Voice Trigger .....................................................................23
Device Management .........................................................23
Secret Mode .......................................................................24
Announcements (Voice Update) ........................................24
Language change .............................................................24
Steering wheel and throttle lever calibration .......................25
Interface (BT SPEED) ........................................................25
4 / 48
S1008_X-8E_jh_V1
Display Warnings ...............................................................26
Voltage Display Calibration ..............................................26
Change the Values in an Input Field ................................27
M-SEL (Model Selection) ..................................................27
REVERSE (Servo Reverse) ................................................27
TRIM ...................................................................................27
TRA ADJ (E.P.A.) ................................................................28
DR/EXP (Dual Rate/Exponential) .....................................28
B.R.A. ..................................................................................29
B-MIX ..................................................................................30
TH RESP (Throttle Response) ..........................................30
IDLEUP (Pumping) .............................................................30
PROFILE .............................................................................31
S/SPEED .............................................................................32
START .................................................................................32
TIMER .................................................................................33
SW SET ...............................................................................34
FAIL SAFE ...........................................................................36
SERVO (S View) ..................................................................36
P/MIX ..................................................................................37
AUX .....................................................................................38
S/MODE ..............................................................................38
A.B.S ...................................................................................40
Operating Receiver GR-8 ..................................................41
GR-8 Receiver Telemetry Menu .......................................42
Firmware Update - Transmitter ........................................ 43
Firmware Update - Receiver ............................................44
Battery Disposal ................................................................45
Care and Maintenance ......................................................45
Warranty .............................................................................45
5 / 48
S1008_X-8E_jh_V1
Introduction
Thank you for purchasing the Graupner X-8E HoTT radio. This
radio will transform the way you have been experiencing surface
radios and add a new level of user experience between you and
your model. The X-8E is easy to use and setup using the TFT
color and touch screen. The voice notifications will even further
enhance your user experience.
You can get more out of your X-8E using our wide selection of
telemetry speed controllers and telemetry ESC’s. All HoTT compatible products can be setup and programmed directly wireless from the X-8E. No need for computers or programming
boxes!
Check us out regularly on the web for new changes and revisions of our manuals and firmware at www.graupnerusa.com.
This product complies with national and European legal requirements.
To maintain product condition and to ensure safe operation, you must
read and follow this user manual and the safety notes before use!
Note
This operating manual is part of the product. It contains important
information concerning operation and handling. Keep these instructions for future reference. Please pass this on to future owners or
third parties.
Service Center
Graupner USA – OPENHOBBY LLC
3941 Park Dr., Suite 20-571
El Dorado Hills, CA 95762
United States
Phone: (855) 572-4746 x2
Hours: Mon – Fri 9:00am – 4:00pm PST
Email: service@graupnerusa.com
Online Support: www.graupnerusa.com
Graupner Online For service centers, downloads, upgrades and product list, visit
our web site at www.graupnerusa.com.
6 / 48
S1008_X-8E_jh_V1
Intended use
The X-8E HoTT transmitter is an ergonomically and technically
modern 8 function radio control system in 2.4GHzHoTT technology for ambitious and professional RC car and speedboat
drivers.
The X-8E HoTT transmitter is designed exclusively to be used in
battery-powered, unmanned radio controlled models; any other
use is not allowed. For any improper use no warranty or liability
is accepted.
Read through this entire manual before you attempt to use the
X-8E HoTT transmitter.
Graupner/SJ constantly works on the development of all products; we reserve the right to change the item, its technology and
equipment.
The product is not a toy. It is not suitable for children under
14 years. The operation of the X-8E HoTT transmitter must be performed by experienced modelers. If you do not have sufficient
knowledge about dealing with radio-controlled models, please
contact an experienced model builder or a model club.
Package content
X-8E transmitter
GR-8 Receiver
LiPo battery 1S 5000 mAh
USB update cable set (No.S8500, 7168.S)
Micro SD card
Steering wheel adapter 10 degree and cover
Manual
7 / 48
S1008_X-8E_jh_V1
Technical Data
X-8E transmitter data
Operating voltage 3.4 to 6 V
Frequency 2.4 Ghz
Weight 1.44 lb (657 g)
Modulation FHSS
Range 1640 ft (500 m)
Control functions 4
Power consumption max. 600 mA
Temperature range
14° to 130°F (-10 to +55 °C)
Antenna type Patch antenna
Dimensions
8.6 x 7.3 x 5.5 in
GR-8 receiver data
Operating voltage 3.6 to 8.4 V
Frequency 2.4 Ghz
Weight
0.24 oz (6.9 g)
Modulation FHSS
Range
1640 ft (500 m)
Control functions 4
Power consumption
80 mA
Temperature range
14° to 130°F (-10 to +55 °C)
Aerial length
4.3 in (110 mm)
Dimensions
1.18 x 0.82 x 0.56 in
Declaration of conformity
S1008 / X-8E
Graupner/SJ declares that the product is conform to EU norms.
EN 301 489-1 V1.9.2
EN 301 489-17 V2.2.1
EN 300 328 V1.8.1
EN 60950-1:2006 + A11:2009 + A1:2010 + A2:2013
EN 62311:2008
8 / 48
Symbols explication
!
Always observe the information indicated by this warning sign.
Particularly those which are additionally marked with the signal
words CAUTION or WARNING.
WARNING indicates the potential for serious injury.
CAUTION indicates possibility of lighter injuries.
Note indicates potential malfunctions.
Attention indicates potential damages to objects.
Safety notes
General
!
These safety instructions are intended to protect this product,
yourself and the safety of others. Please read this section very
carefully before using this product!
To avoid risk of suffocation, keep packaging materials away from
babies and small children.
Supervision by an experienced adult is required for chil-
dren, persons mentally or physically handicapped, novices, or anyone not capable of safely using this product.
Always perform a range and function test on the ground
before you use your model (hold your model tight). Repeat
the test with running motor and with short throttle bursts.
Check all relevant laws and regulations before using this
remote control model. These laws and regulations must
be observed in for the safety of yourself and others and
may vary by state, region, or country.
Special liability insurance policies are mandatory for all
device operations. If you already own a device, determine
if the respective model is covered by your insurance.
9 / 48
S1008_X-8E_jh_V1
Protect all equipment from dust, dirt, moisture, vibration and
excessive heat or cold. The models may only be operated
remotely in normal outside temperatures ranging from 14° to
130°F (-10°C to 55°C).
Maintain frequent updates of your HoTT components with
the latest firmware version.
For additional questions or support, contact the Graupner
USA Service Center, or an experienced user.
Battery Safety
CAUTION
Protect batteries from dust, moisture, heat and vibrations.
For use in dry locations only.
Do not use damaged batteries.
Batteries not handled properly may catch fire, explode, or
cause irritation and burns. To extinguish a battery fire use
either water, CO² or sand.
Batteries should not be heated, burned, short-circuited,
incorrectly inserted, modified, soldered or welded.
Charge batteries in a room outfitted with a smoke detec-
tor, on a non-flammable, heat-resistant and non-conductive surface. Keep away from combustible or highly flammable objects while charging. Always monitor batteries
during the charging process.
Do not exceed the maximum quick-charging current
specified for the respective cell type.
If a battery reaches temperatures above 140°F (60°C)
while it is being charged, immediately stop charging and
let the battery cool down to approximately 86 - 104°F (30
- 40°C).
Never charge batteries that have already been charged,
are hot or are not fully discharged. If a cell in a battery pack
heats up following a quick-charge process, this may indicate a defective cell. Discard the battery immediately!
!
10 / 48
S1008_X-8E_jh_V1
Damaged or corroded batteries may leak an electrolyte
that is caustic and should not be touched or come into
contact with your skin or eyes. In case of emergency,
rinse thoroughly with water and seek immediate
medical attention.
Always fully recharge the battery.
Special instructions on charging LiPo batteries
To charge and discharge LiPo batteries, only use specifi-
cally designed chargers/dischargers with balancer connector.
The white connector (cell count + 1 pole) is designed for
the connection to a LiPo balancer or a battery charger as
a single cell charger with a manual cell balancer. Always
charge the battery with the balancer connector.
Safety notes for stocking LiPo batteries
LiPo batteries should be stored with a voltage of about
3.8V per cell. If the cell voltage falls below 3V, then the battery must be charged. Fully discharging or storing a battery with a cell voltage < 3V renders the battery useless.
Exersize safety procautions when charging and transport-
ing your LiPo batteries. Always use a safety bag.
11 / 48
S1008_X-8E_jh_V1
Control Elements and connections
Buttons and Switches Layout
1. Touch Display
2. Steering wheel
3. Throttle lever
4. Earphone socket
5. SD card slot
6. Data socket
7. Mini USB socket
8. On/off switches
9. Direct button S1 (see chapter SW SET)
10. Direct button S2 (see chapter SW SET)
1. PS 1
2. PS 2
3. PS 3
4. DV
5. TR 1
6. TR 2
7. TR 3
8. TR 4
9. TR 5
1
1
3
2
4
5
6
7
8
8
9
9
1
2
4
5 6 7
8
3
9
10
12 / 48
S1008_X-8E_jh_V1
Commissioning
Battery connection
Remove the cover from the bottom of the transmitter and con-
nect the battery, paying attention to the correct polarity. Shut
the cover and ensure it is securely closed.
Set the the battery warning threshold in accordance with the
battery used. (see Chapter “SYS SET”)
If a voltage warning is triggered, charge the batteries.
Battery charging
Charge the LiPo batteries in the transmitter through the micro
USB socket using the USB cable provided. For all other battery
types, use an USB connection, e.g. a PC USB port or an USB
net adapter. During the charging process the LED under the dis-
play lights up red. When the battery is full the LED turns off.
Alternatively, you can charge the battery outside the transmitter
with an RC battery charger (not included).
Transmitter power switch
On the top of the transmitter there are two buttons. To turn on
the transmitter with RF off, push the right button for about 2 sec-
onds. When the RF mode is off, a safety feature is activated that
prevents switched-on models from accidentally starting during
programming. Additionally, power consumption is reduced,
significantly conserving battery life.
To turn on the transmitter with RF on, push the left button.
Battery socket
On - Off
Switch
13 / 48
S1008_X-8E_jh_V1
Tension spring adjustment
Adjusting the steering wheel position
To adjust the steering wheel
tension spring, locate the
adjusting screw in the housing
below the wheel.
Using a hex key, turn the
screw left or right to increase
or decrease tension force.
To adjust the throttle lever tension spring, locate the adjusting
screw in the housing at the throttle lever.
Using a hex key, turn the screw left or right to increase or
decrease tension force.
To adjust the steering wheel position forward or backward,
remove the X-8E logo cover, located above the steering wheel.
Loosen the two screws and maneuver the steering wheel into
desired position. Retighten the two screws to secure.
14 / 48
S1008_X-8E_jh_V1
1.
2.
3.
Converting the steering wheel for left-handers
The entire steering wheel can be converted to the left side for
operation by left-handers.
1. Remove the X-8E logo cover (see following figure).
2. Unscrew the steering wheel (2 screws).
3. Unplug the steering wheel cable.
4. Mount the steering wheel on the left side and re-plug the
cable.
5. Tighten the steering wheel and replace the X-8E logo
cover.
4.
Attention After the conversion, check all steering wheel func-
tions, buttons and rotary controls before operating the model
again!
5.
15 / 48
S1008_X-8E_jh_V1
Installing the steering wheel adapter
The steering wheel position can be adjusted 10 degrees through
an adapter.
1. Remove the steering wheel.
2. Remove the four long screws under the wheel.
3. Remove the steering wheel mechanism and disconnect
the connector.
4. Adjust the adapter to preferred position and secure with
the four short screws.
5. Reconnect the connector
6. Install the steering wheel mechanism on the adapter part
and reattatch the steering wheel.
Attention After the conversion, check all steering wheel func-
tions, buttons and rotary controls before operating the model
again!
Loading...