GRAUPNER GR-10C User Manual
Manual
EN
HoTT receiver GR-10C with Copter firmware
No. S1029
2 - 20
GR-10C_jh_V1
3- 20
GR-10C_jh_V1
Index
Introduction ............................................................................4
Service Centre ........................................................................4
Intended use ..........................................................................5
Package content ....................................................................5
Declaration of conformity ........................................................5
Symbols explication ................................................................6
Safety notes ...........................................................................6
Installation in the model (multicopter) ......................................8
Interfaces ...............................................................................8
Receiver setup menu ..............................................................9
Transmitter pre-settings ........................................................10
Switching function channel 7 and 8 ......................................10
Initialization of the gyro .........................................................11
Special function channel 6 ....................................................11
Basic settings .......................................................................11
Axis assignment ...................................................................14
Roll and Nick setting .............................................................15
Multicopter Yaw settings .......................................................16
Technical Data ......................................................................16
Firmware Update ..................................................................17
Notes on environmental protection .......................................19
Care and maintenance .........................................................19
Warranty certificate ...............................................................19
4 - 20
GR-10C_jh_V1
Introduction
Thank you very much,
for purchasing the Graupner receiver GR -10C. This receiver is
extremely versatile.
Read this manual carefully to achieve the best results with your
Graupner GR-10C RECEIVER and first of all to safely control your
models. If you experience any trouble during operation, take the
instructions to help or ask your dealer or Graupner Service Centre.
Due to technical changes, the information may be changed in
this manual without prior notice. Be always updated by checking periodically on our website, www.graupner.de to be always
uptodate with the products and firmwares.
This product complies with national and European legal requirements.
To maintain this condition and to ensure safe operation, you must
read and follow this user manual and the safety notes before using
the product!
NOTICE
This manual is part of that product. It contains important information concerning operation and handling. Keep these instructions for future reference and give it to third person in case you
gave the product.
Service Centre
Graupner Central Service
Graupner/SJ GmbH
Henriettenstrasse 96
D-73230 Kirchheim / Teck
Servicehotline
(+49) (0)7021/722-130
Monday - Thursday
9:15 am - 5:00 pm
Friday
9:15 am - 1:00 pm
Graupner USA
OPENHHBBY LLC
3245 University Ave
Suite 1520
San Diego, CA 92104
Website: www.graupnerusa.com
Phone: +1 855-572-4746
Email:service@openhobby.com
For the service centers outside Germany please refer to our web
site www.graupner.de
Graupner in Internet
5- 20
GR-10C_jh_V1
Intended use
The receiver is only suitable to be installed on multicopter models. More punctual information about receiver can be found in
the Technical data section.
The receiver is designed exclusively to be used in battery-powered, radio controlled models, any other use is not allowed. For
any improper use no warranty or liability is accepted.
Read through this entire manual before you attempt to install or
use the receiver.
Graupner/SJ constantly works on the development of all products; we reserve the right to change the item, its technology and
equipment.
Target group
The product is not a toy. It is not suitable for children under 14
years. The installation and operation of the receiver must be performed by experienced modellers. If you do not have sufficient
knowledge about dealing with radio-controlled models, please
contact an experienced modeller or a model club.
Package content
S1029 GR-10C receiver
Manual
Declaration of conformity
S1029 GR-10C receiver
Graupner/SJ declares that the product is conform to EU norms.
EN 301 489-1 V1.9.2 EN 301 489-17 V2.2.1
EN 300 328 V1.8.1
EN 60950-1+A11+A1+A12+A2:2013
EN 62311:2008
6 - 20
!
GR-10C_jh_V1
Symbols explication
Always follow the information marked with the CAUTION or WARNING symbol. The signal word WARNING indicates the potential for
serious injury, the signal word CAUTION indicates possibility of
lighter injuries.
The signal words note and caution indicate potential damages to
objects.
Safety notes
General
These safety instructions are intended not only to protect the
product, but also for your own and other people’s safety. Therefore please read this section very carefully before using the product!
Do not carelessly leave the packaging material lying around,
since it might become a dangerous toy for children.
Persons, including children, with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge,
or not capable to use safely the receiver must not use the
receiver without supervision or instruction by a responsible
person.
Operation and use of radio-controlled models needs to be
learnt! If you have never operated a model of this type before,
start carefully and make yourself familiar with the model's
reactions to the remote control commands. Proceed responsibly.
First, always perform a range and function test on the ground
(to do so, hold your model tight), before you use your model.
Repeat the test with running motor and with short throttle
bursts.
Before you start using the remote control model, you have
to check the further relevant laws and regulations. These
laws you must obey in every case. Pay attention to the possibly different laws of the countries.
!
Inform yourself before flying
your model on which maximum
altitude you can fly in the
uncontrolled airspace over the
starting position and do not
exceed it.
7- 20
GR-10C_jh_V1
The insurance is mandatory for all kinds of model operation.
If you already have one, please inform yourself if the operation of the respective model is covered by your insurance. If
this is not the case, conclude a special liability insurance policy for models. We recommend to provide the copter with a
label, where are indicated the name, address, tel. n., E-mail
and Insurance N. So that the copter can be clearly assigned
in the event of a crash.
Due to safety and licensing reasons (CE), any unauthorized
reconstruction and/or modification of the product is prohibited.
Only use the components and spare parts that we recom-
mend. Always use matching, original Graupner plug-in connections of the same design and material.
Make sure that all of the plug-in connections are tight. When
disconnecting the plug-in connections, do not pull the
cables.
Protect the receiver from dust, dirt, moisture and other for-
eign parts. It must be protected from vibration as well as
excessive heat or cold. The models may only be operated
remotely in normal outside temperatures such as from -10°C
to +55°C.
Only operate all your components using the current software
version.
If you have questions which cannot be answered by the
operating manual, please contact us (contact information
see page 3) or another expert in the field.
WARNING
Also while programming, make sure that a connected elec-
tric motor cannot accidentally start. Injury risk by the turning
propellers!
Avoid shock and pressure. Check the receiver regularly for
damages to the housings and cables, specially after model
crashes. Damaged or wet receiver, even if re-dried, should
no longer be used!
!
Loading...