GRAUPNER 16005600 User Manual

OPERATING INSTRUCTION

Prior to use, please read this manual thoroughly.

Keep this manual in a convenient place for quick and easy reference.

GR-4 HoTT 2.4GHz Receiver Manual

Contents
Before use-------------------------------------------------------

• Support and Service-----------------------------------------------

- Customer Support------------------------------------------------------------

- Internet sales site-----------------------------------------------------

- A/S regulation-------------------------------------------------------

• OPENHOBBY A/S Center-----------------------------------------------------------

• Box Contents-----------------------------------------------------------------

• Warning Notes-----------------------------------------------------------

• System Features-----------------------------------------------------------------

• Specification-------------------------------------------------------------------

• Product Description--------------------------------------------------------------

• HoTT

• Operation

• Binding and Range test

• Switch Functions-------------------------------------------------------------------P7

• LED and Buzzer Indication------------------------------------------------------------------------

• Receiver Specification and Port Description

BEFORE USE

Thank you for purchasing Graupner GR-4 HoTT 2.4GHz Receiver. This system is extremely versatile
and may be used by beginners and pros alike. In order for you to make the best use of your system,
please read this manual carefully. If you have any difficulties while using your system, please consult
the manual, our online Frequently Asked Questions (on the web pages referenced below), your
hobby dealer, or the Graupner Service Center. Due to unforeseen changes in production procedures,
the information contained in this manual is subject to change without notice.

SUPPORT AND SERVICE

• Customer support
Please feel free to ask any question by e-mail or phone. We’ve been trying to deal with your question.

We are open from nine to six, Monday to Friday in Korea. We may respond to your question by e-mail
as soon as possible when we are close.

• Internet sales site
Please feel free to contact “www.openhobbby.com” to get all information on product features,

specifications, running events and the newest product line up.

• A/S regulation
Only when the product is faulty after normal operation within the warranty period, we will repair the

product for free based on our regulations. The repair will be paid for by the consumer when the
damage is due to use in improper ways or beyond the warranty period.

• Warranty regulation

Refer the WARRANTY CARD in a Package

OPENHOBBY A/S CENTER

202 Dong- 201, Chunui Techno-Park II, 18, 198 street, Bucheon-ro, Wonmi-Gu, Bucheon-Shi,
Gyungki-Do KOREA 420-857
Phone: [phone] Fax: [phone]
Customer Service E-mail: [e-mail]

BOX CONTENTS

GR-4 HoTT Receiver
Manual
Warranty Card
Temperature/Voltage Sensor (S8362)

WARNING NOTES

• Never operate your car or truck in a crowded street with traffic. Especially, do not drive in a place

near railway, chemical substance, gas to prevent any damage.

• This product is not intended for use by inexperienced or disabled person without direct supervision
of a responsible, knowledgeable adult. This is not suitable for child ren under 18 years.

• The radio system is affected by signal environment and the electronic jamming signals can cause
disorientation and loss of control of your aircraft.

• Please read the manual to make the best use of the product

• Make sure to check all operations of channels before use.

• For the safe use, please operate the Range Check Mode before use.

• Be careful not to turn your transmitter off while in use.

• Do not touch or grab antenna during the use.

• Do not operate your model in the rain or run through standing water

• Fail Safe should be set before use to prevent uncontrollable situation occurred by any interruption.
It is recommended to set throttle channel to Neutral condition or brake condition.

• Always operate your program setup mode after stopping motor’s power or engine and disconnecting
drive battery.

• Make sure whenever you start operating your transmitter, turn your transmitter on and then turn your
receiver on. Whenever you stop your transmitter , turn your receiver off first and your transmitter.

• Always disconnect the battery pack from the speed control when not in use to avoid short circuits
and possible fire hazard.

• Always insulate exposed wiring with heat shrink tubing or electrical tape to prevent short circuits,
which can damage ESC.

• Don‘t make any changes on the structure and design of your controller unless they are described in

the manual.

• Only those components and accessory parts which have been recommended by us may be used.
Use only genuine and matching Graupner/SJ connectors and accessory parts.

• Make sure whenever you start connecting and operating the controller, that your transmitter is
switched on, and has the throttle set to position “STOP”.

Binding & RF Range Test
BIND

Press and hold Bind button for 3 sec while your receiver is powered on and then LED indicator is off.
Now press Bind button of your transmitter and then receiver’s LED indicator is off.

Binding Button

Binding Button

Control Button

RF RANGE TEST

When BIND button is touched after the connection between transmitter and receiver, RF RANGE
TEST is now activated. RF TEST is continued during 90 seconds and it is automatically deactivated.
RF RANGE TEST is deactivated by touching BIND button during RF RANGE TEST mode.
Please note that your model is not controllable if your model is far away from you during Test mode
due to the short transmit distance.

Receiver Specification and Port Description

1. GR-4 Receiver Specification

Channel 2CH
Frequencies 2400 – 2483.5Mhz
Modulation FHSS
Input Voltage 3.6 ~ 8.4V
Output Power 60mW
Operating Current 35mA
Display Indicator One LED(red)

Extra Function Yes(Port3)
Fail Safe free/Fail safe

External Temp Sensor Port4(10 ~ 200`C)
External Voltage Sensor Port4(1.0 ~ 25.5V)
Telemetry Sensor Port3

Size 30x21x14.3 mm (1.18x0.82x0.56 in)
Weight 5.5 g ( 0.19 oz)

2. Receiver Port Description

Function
Port1 Ch1 Signal output
Port2 Ch2 Signal output

Port3 Telemetry Sensor / Batt (HoTT-v1 Senso r only)
Port4 Temp Sensor/ Voltage Sensor

T/V Connector

B/T Connector

CH2 Connector

CH1 Connector

1) Port 1, 2 should be connected to servo or ESC.

2) Port 3 supports low voltage warning alarm with beep and LED indicator.

In addition, it is available to use with telemetry sensor .
When using receiver battery (Nixx 4~5 cell, LiPo 2 cell), it needs to be connected to Port3.
As for low voltage warning alarm, the default value is 3.7V.

Caution: When using LiPo 2 cell for receiver battery, you may protect your battery from any damage
by using optional smart box, which ensures voltage adjustment and warning alarm function.

3) Port 4 is designed that it will activate the beep and LED indicator when your engine gets hot.

Caution: Regardless of receiver battery type, warning alarm is activated if battery capacity is lower
than 70%. Therefore, you need to use your model after fully charging battery.

<Voltage/Te m perature Sensor Configuration>

Ex Voltage(+)

T

V

G

NTC Thermistor

10K/C

Ex Voltage (+): Connect wit h ESC Powe r Connector(+)
NTC Thermistor: Connect with Engine Head

Connect sensor to Port 4 as above. Temp sensor should be installed on engine head and Volt sensor
should be installed on ESC power connector (+).

Caution: Warning alarm may not be activated, depending on weather condition or mounting location.
If it is not activated, change mounting location or adjust temperature value with optional smart box

(Telemetry box). (Default value: 100℃)

4) Receiver Indicator LED’s

LED OFF: Very good si gnal condition
LED blinks: Not good signal condition
LED ON: No signal

LED and Buzzer indication

Bind Switch RED GREEN Buzzer
RX BIND ON Push ON ­RX BIND OFF - Slow flash -

Rang TEST
Fail Safe

Setup/Cancel
Free ON 2 blink Low 2Time

Push
(Bind on status)

Push 3sec
(Bind on status)

ON Slow flash
ON 3 blink Low 3Time

Low
2Time(90sec)

Warning Status
Tx Receive Rate Low - 1cycle - 1cycle
Sensor Warning - 2cycle - 2cycle
Rx Ex Temp High - 3cycle - 3cycle
Rx Ex Volt Low - 4cycle - 4cycle
Rx Voltage Low - 5cycle - 5cycle
Tx Low Battery - 6cycle - 6cycle

COMPLIANCE INFORMATION FOR THE EUROPEAN UNION

• NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a resi­dential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

• FCC radiation exposure statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance of 20 cm between the
radiator and your body.

• ENVIRONMENTAL PROTECTION NOTES

This product must not be disposed of with other waste. Instead, it is the user’s responsibility to their
waste equipment by handing it over to a designated collection point for the recycling of waste
electrical and electronic equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner
that protects human health and the environment. For more information about where you can drop off
your waste equipment for recycling, please contact your local city office, your household waste
disposal service or where you purchased the produce.