36 8945EDA-D Dual SD/HD Equalizing Distribution Amplifier
Key Features
•Dual SD-SDI or HD-SDI equalizing distribution amplifier
•Single 1x8 or dual and configurable 1x4 models
•100% DVB ASI compliant
•High density (up to 10 1x4 distribution amplifiers per rack unit)
•Equalizer bypass for low bit-rate signals
•Remote control and monitoring via Ethernet frame interface
Applications
•Distributing stable HD signals or SD/HD in rate-agile installations
•Installations that will upgrade to HD
•Optimizing density and cost
•Distribution of non-standard wideband signals
Specifications
Supported Frame Types
GeckoFlex frame
Power Rating
2.9 Watts – single slot
Inputs
SD/HD-SDI: Two inputs
Input equalization (Belden 1694A):
•Up to 125m HD-SDI
•Up to 330m SD-SDI
Return loss: >15 dB 0.004 to 1.5 GHz
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94 (NTSC) 576i @ 50 (PAL-B)
DVB ASI: Yes
Input types supported: SMPTE 259-M, 292-M, 344-M (270, 1483.5 and 1485 Mb/s)
Input type selection: Manual only between HD and SD/ASI
Performance
Electrical Length: <5 ns
The 8945EDA-D module is a dual SD/HD equalizing distribution amplifier. It provides four outputs for each of its two inputs and can equalize up to 125 meters of Belden 1694A cable for HD-SDI. It can be used to distribute either SD-SDI or HD-SDI, making it ideal for mixed-format applications or installations where an upgrade is planned.
|
Equalizer bypass |
|
SD/HD |
Equalizer |
|
SDI In |
||
|
||
|
Equalizer bypass |
|
SD/HD |
Equalizer |
|
SDI In |
||
|
Outputs
SD/HD-SDI: Eight outputs
Return loss:
•>15 dB, 5 to 270 MHz
•>10 dB to 1.5 GHz
Signal level: SDI 800 mVp-p ±10%
DVB ASI: Eight non-inverted outputs
Distribution
Equalizing: Active/bypass
Output mode: 1x8/dual 1x4
Input type selection: Manual only between HD and SD/ASI
Control and Monitoring
SNMP: Yes
Web page configuration: Yes
Local configuration: Yes
Newton support: Yes
NetConfig support: Yes
NetCentral support: Yes
8900WE-R
SD/HD |
J1 |
J2 |
SD/HD |
|
|
||
SDI Out |
|
|
SDI Out |
SD/HD |
J3 |
J4 |
SD/HD |
|
|
||
SDI Out |
|
|
SDI Out |
SD/HD |
J5 |
J6 |
SD/HD |
|
|
||
SDI Out |
|
|
SDI Out |
SD/HD |
J7 |
J8 |
SD/HD |
|
|
||
SDI Out |
|
|
SDI Out |
SD/HD |
J9 |
J10 |
SD/HD |
|
|
||
SDI In |
|
|
SDI In |
4X SD/HD-SDI Out
4X SD/HD-SDI Out
Ordering Information
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames including Gecko-A or Gecko-V frames.
8945EDA-D
Dual SD/HD equalizing distribution amplifier, front and rear module set
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular