8935CF 4-Channel Electrical to 4-Channel Fiber Optic Conversion Module 59
Key Features
•Four-channel SDI/HD-SDI fiber transmitter
•Also supports DVB ASI, AES, and Grass Valley audio TDM interface
•Supports up to two SFP devices for up to four fiber optic outputs
•Reclocking for stable long distance signals
•Reclock bypass for non-SDI signal types
•Accommodates lasers with separated wavelengths for CWDM optical multiplexing
•Single-mode fiber
•Can be used with the 8935FC receiver and other fiber-ready modules for distances of between 0 and 50 km, depending on the transmitter
•Meets SMPTE 292M/297M/259M signal specifications
Applications
•Transporting multiple high-definition video feeds over long distances
•For constructing SD/HD-SDI optical tielines
•Sending multiple optical signals over long distances to fiber-ready synchronizing modules for re-timing
•To feed the 8939FCA for an extremely compact multiplexed fiber solution
Specifications
Supported Frame Types
GeckoFlex
Power Rating
7.5 Watts (with two SFP devices) – single slot
Modes of Operation
The 8935CF supports following modes of operations:
•Auto reclock 270 Mb/s / 1.5 Gb/s / bypass mode
•Auto reclock 270 Mb/s / 1.5 Gb/s mode
•Fixed reclock 270 Mb/s mode
•Fixed reclock 1.5 Gb/s mode
•Fixed bypass mode
Environmental
Operating temperature range: 0 to +45°C Non-operating temperature range: -10 to +70°C
Humidity: 90% non-condensing
Serial Digital Input
Connector: BNC equalized for up to 300m of Belden 1694A cable for bit rates up to 270 Mb/s and up to 100 m of Belden 1694A for bit rates from 270 Mb/s to 1.5 Gb/s
Input impedance: 75Ω Return loss: 15 dB Reclocking:
•SMPTE 292 M-1998 at 1.485 Gb/s
•SMPTE 259M-1997 and DVB-ASI at 270 Mb/s
Non-reclocking: 1 to 540 Mb/s, AES 3id-2001 and MADI
The 8935CF is a four-channel electrical to optical broadcast quality fiber optic conversion module with reflected electrical outputs. It can accommodate SD/HD-SDI video inputs from 270 Mb/s to 1.5 Gb/s as well as DVB ASI, unbalanced AES, and Grass Valley audio TDM interfaces. The optical circuitry is housed in dedicated strapmount SFP submodule devices mounted on the module circuit board. To construct a four-channel solution, select two of the SFP transmitter devices for two four-channel operation. The SFPs selected set the power and the wavelength for the unit, which allows for CWDM operation when combined with the 8939FCA/8939FCB optical
multiplexer. This replaceable optical technology allows for easy upgrade, reconfiguration, and servicing.
Parameters are controllable via the NetConfig Web browser interface for configuration and parameter adjustment. The popular NetCentral application provides health monitoring for modular products as well as many other Grass Valley products.
Coax
Inputs
Equalizer #1
Ch1
Equalizer #2
Ch2
Equalizer #3
Ch3
Equalizer #4
Ch4
Bypass |
Reclock |
Bypass |
Reclock |
Bypass |
Reclock |
Bypass |
Reclock |
Fiber Digital Outputs
Connector: Four LC optical connectors
Optical outputs: One optical per electrical input
Electrical outputs: One 75Ω BNC reflected electrical output per electrical input
Electrical Length
Reclocked at 270 Mb: 10 ns
Reclocked at 1.5 Gb: 8 ns
Bypass: 7 ns
Fiber Optic Submodule Devices
Channels |
2 Frequencies per CWDM SFP Device |
|
|
Channel 1 and 2 |
1470 nm & 1490 nm Transmitters |
|
|
Channel 3 and 4 |
1510 nm & 1530 nm Transmitters |
|
|
Channel 5 and 6 |
1550 nm & 1570 nm Transmitters |
|
|
Channel 7 and 8 |
1590 nm & 1610 nm Transmitters |
|
|
Channel 9 and 10 |
1310 nm & 1330 nm Transimitters |
|
|
Channel 11 and 12 |
1350 nm & 1370 nm Transmitters |
|
|
Channel 13 and 14 |
1390 nm & 1410 nm Transmitters |
|
|
Channel 15 and 16 |
1430 nm & 1450 nm Transmitters |
|
|
These SFP transmitters are Class 1 laser devices
|
8935CF-R |
CH 1 |
CH 1 |
Input |
Output |
CH 2 |
CH 2 |
Input |
Output |
CH 3 |
CH 3 |
Input |
Output |
CH 4 |
CH 4 |
Input |
Output |
Fiber Out |
Fiber I/O |
Connector |
Connector |
Cable Driver #1 |
Ch1 |
|
|
||
Cable Driver #2 |
Ch2 |
|
|
||
Cable Driver #3 |
Ch3 |
|
|
||
Cable Driver #4 |
Ch4 |
|
|
||
TX #1 |
FO1 |
|
|
||
TX #2 |
FO2 |
|
Dual TX |
FO3 |
|
TX #3 |
||
|
||
TX #4 |
FO4 |
|
Dual TX |
|
Ordering Information
This module can be mounted in a single slot in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames.
8935CF
Electrical to fiber optic 1:1 converter baseboard, (front and 8935CF-R rear module set)
Important Order Note: Two SFP devices are required for the full operation of the 8935CF module.
SFP Device – Dual Transmitter
• SFP-13103G-M1DTX-K
SFP Device – Dual Transmitter for CWDM
•SFP-CWDM3G-1-K – 1470 nm and 1490 nm
•SFP-CWDM3G-2-K – 1510 nm and 1530 nm
•SFP-CWDM3G-3-K – 1550 nm and 1570 nm
•SFP-CWDM3G-4-K – 1590 nm and 1610 nm
•SFP-CWDM3G-5-K – 1310 nm and 1330 nm
•SFP-CWDM3G-6-K – 1350 nm and 1370 nm
•SFP-CWDM3G-7-K – 1390 nm and 1410 nm
•SFP-CWDM3G-8-K – 1430 nm and 1450 nm
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular