8925EMB-U SD/HD Unbalanced Audio Embedder 21
Key Features
•Eight-channel (four stream) SD/HD digital audio embedder (multiplexer)
•Four unbalanced AES inputs
•Accepts asynchronous PCM audio
•Supports Dolby E
•Three SD/HD SDI outputs with embedded audio
•Sample rate conversion accepts 32 kHz, 44.1 kHz, 48 kHz, or 96 kHz
•Embeds 20 or 24 bits
•Fiber-ready option for receiving or transmitting over fiber
Applications
•Embedding audio into an HD-SDI stream
•Embedding asynchronous PCM digital audio
•Embedding audio channels and sending an HD-SDI signal over fiber
•Suitable for use where existing embedded audio needs to be combined with incoming embedded audio
Specifications
Supported Frame Types
GeckoFlex with 8900NET (Net Card) for configuration
Power Rating
7.7 Watts – single slot
Video Inputs
SD/HD-SDI:
•Input equalization: HD up to 125m, SD up to 330m
•Auto-sensing: yes
Optical: Single-mode (optional)
Formats supported: 1080i @ 59.94, 50, 720p @ 59.94, 50, 480i @ 59.94, 576i @ 50, 1080p @ 23.98, 1080sF @ 23.98
Audio Inputs
AES: Four inputs
•Signal type – unbalanced:AES-3id-2001
•Common mode range: N/A
•Sampling rate: 32, 44.1, 48, or 96 kHz
•Resolution: 20or 24-bit
•Input return loss: > –25 dB (100 kHz to 12 MHz)
•Input impedance: 75Ω
•Connector type: BNC
Video Outputs
SD/HD-SDI: Four outputs
•Return loss: >15 dB, 5 to 270 MHz; >15 dB typical, to 1.5 GHz
The 8925EMB-U is a compact eight-channel SD/HD digital audio embedder (multiplexer) module. It provides three distributed SDI outputs with embedded audio and one output acting as an input reclocked loop-through. This module is ideal for building dense SD/HD and audio infrastructure for production and playout applications.
The module automatically detects the audio format, and Dolby E streams are also detected and passed transparently. The AES inputs can handle asynchronous audio and sampling rates from 32 kHz to 96 kHz, which are converted to synchronous 48 kHz embedded within the video stream.
With its fiber-ready architecture, the 8925EMB U can be configured to support up to two fiber inputs and two fiber outputs. With the fiber transmitter or transceiver option, it can take video from copper or fiber, embed audio, and transmit over fiber in one single slot. The receiver option makes it ideal for receiving incoming feeds from longer distances and locally embedding audio.
8900UVF-R
Audio |
J1 |
J2 |
Audio |
|
|
||
Input |
|
|
Input |
Audio |
J3 |
J4 |
Audio |
|
|
||
Input |
|
|
Input |
SD/HD |
J5 |
J6 |
SD/HD |
|
|
||
SDI Out |
|
|
SDI Out |
SD/HD |
J7 |
J8 |
SD/HD |
SDI Out |
|
|
|
Reclocked |
|
|
SDI Out |
Output |
|
|
Fiber In/Out |
SD/HD |
J9 |
|
|
|
|
Connector |
|
SDI In |
|
|
|
|
|
|
|
|
|
FIBER |
|
All parameters can be adjusted via standard HTML Web browsers or via the Newton Control Panel. In addition NetConfig and NetCentral can be used for remote configuration and signal health monitoring.
SD/HD |
Fiber RX |
|
Option |
|
Fiber TX |
SD/HD |
Optical In |
|
|
|
Optical Out |
||
|
|
|
|
|
||
|
|
Option |
Only one fiber |
Option |
|
|
|
Fiber RX |
option may be |
Fiber TX |
|
||
2X SD/HD |
|
|
2X SD/HD |
|||
|
|
selected |
|
|
||
Optical In |
Fiber RX |
|
|
|
Fiber TX |
Optical Out |
|
|
|
|
|
||
|
|
|
|
|
|
SD/HD |
|
|
|
|
|
|
Reclocked |
|
|
Equalizer and |
Delay |
|
|
SDI Out |
|
|
|
|
|
||
SD/HD |
|
Reclocker |
Block |
|
|
|
|
|
|
|
|
|
|
SDI In |
|
|
|
|
|
3X SD/HD |
|
|
|
Bypass |
MUX |
|
|
4X |
|
Sample Rate |
|
|
SDI Out |
|
|
|
|
|
|||
AES |
|
Converter |
|
|
|
|
In |
|
|
|
|
|
|
|
|
Bypass |
|
|
|
|
•Signal level: SDI 800 mVp-p ±10%
•Rise/fall time (20-80%): 140 ps typical for HD,
640 ps typical for SD
•Output jitter, low jitter applied:
<0.2 UI HD > 100 kHz
<1.0 UI HD 10 Hz > 100 kHz
<0.2 UI SD > 1 kHz
<0.2 UI SD 10 Hz > 1 kHz
Optical: Single-mode (optional)
Electrical Length (delay)
Minimum SDI Video Delay Mode:
HD input: <19 µs, SD input: <13 µs
Minimum SDI Audio/Video Offset Mode:
HD input: <84 µs, SD input: <525 µs
PCM Audio with SRC (at 48 kHz): HD input: 3.04 ms, SD input: 3.45 ms
Non-PCM audio or PCM with SRC off: HD input: 0.15 ms, SD input: 0.56 ms
Minimum Audio/Video Output Offset:
SD: 40 µs, HD: 62 µs
Embedding
Delete individual embedded audio group: Yes/no Embedded audio stream: Silence, any incoming group or any audio input
Output audio resolution: 20-, 24-bit, or auto as input
Ordering Information
This module can be mounted in a GeckoFlex frame but not in other 8900 series frames, including Gecko-A or Gecko-V frames. As this module has no card-edge controls, an 8900NET (Net Card) Network Interface card is required to configure this module.
8925EMB-U
SD/HD embedder, front and rear, four unbalanced audio inputs, front and rear module set
SFP-13103G-M1TRX
Fiber transceiver. Low-power 1310 nm single-mode optical transceiver
SFP-13103G-M1DTX
Dual fiber transmitter. Dual low-power 1310 nm singlemode optical transmitter
SFP-13103G-M1DRX
Dual fiber receiver. Dual low-power 1310 nm singlemode optical receiver
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular