8 8912RDA-D Dual AES Reclocking Digital Audio DA
Key Features
•75Ω AES3 or 110Ω AES3 inputs
•Eight 110Ω AES3 outputs, or four 110Ω AES3 outputs per channel when in dual mode
•Auto-detect data rate and reclock sample rates from 32 kHz to 96 kHz
•Lock indicator LED for both channels
•Remote monitoring via Ethernet
The 8912RDA-D brings low-cost balanced AES distribution to the 8900 family of products. This module complements the 8911 AES reclocking DA by offering terminal screw connectors for those facilities requiring balanced I/O. Where four or fewer outputs per input are required, this module provides a very compact solution. The flexibility of the 8912RDA-D allows you
to switch easily between a 1x8 distribution amplifier and a dual 1x4 distribution amplifier. In addition, we’ve added a powerful remote monitoring capability to enable you to keep track of all your conversion and distribution assets using our NetCentral centralized SNMPbased remote monitoring software.
Pin 3 |
+ |
|
G |
Pin 1 |
Pin 2 |
_ |
8900A-R |
_ |
Pin 2 |
Pin 1 |
G |
J1 |
+ |
Pin 3 |
|
AES |
AES |
|
|
|
J3 |
|
||
|
CH1 |
CH1 |
|
|
|
|
J2 |
|
|
Outputs |
|
Outputs |
||
|
|
J4 |
|
|
|
AES |
J5 |
AES |
|
|
J7 |
|
||
|
CH2 |
CH2 |
|
|
|
|
J6 |
|
|
Outputs |
J8 |
Outputs |
||
|
|
|
|
|
AES CH1 |
J9 |
AES CH2 |
||
|
||||
|
Input |
J10 |
Input |
|
AES CH1 |
J11 |
AES CH2 |
||
|
||||
|
Input |
J12 |
Input |
|
J13
Not Used Not Used
J14
|
Unbalanced |
|
|
|
Out 1a |
|
|
CH 1 |
|
|
|
|
|
||
|
|
Reclocker |
|
Out 1b |
CH 1 |
||
Input |
|
|
|
||||
|
|
|
|
||||
Balanced |
T1 |
|
Out 1c |
Outputs |
|||
|
|
|
|||||
|
|
|
|
Single |
Out 1d |
|
|
|
|
|
|
|
|
||
|
|
|
|
Channel |
|
|
|
|
Unbalanced |
|
|
|
Out 2a |
|
|
CH 2 |
|
|
Dual |
|
|
||
|
|
|
Out 2b |
CH 2 |
|||
Input |
|
|
Reclocker |
Channel |
|||
|
|
|
|||||
Balanced |
T2 |
Out 2c |
Outputs |
||||
|
|
|
|||||
|
|
|
|
|
Out 2d |
|
|
Frame Bus |
|
Microprocessor |
|
LEDs |
|
Specifications
Supported Frame Types
GeckoFlex with 8900A-R GeckoFlex Audio rear module, Gecko Audio frames: 8900TX-A, 8900TF-A, 8900TFN-A
Power Rating
4 Watts – single slot
Input
Signal type: AES-3id-1992 or AES3 AC coupled
Number of inputs: Two
Impedance: 75Ω, 110Ω, or High Z Connectors: BNC or terminal block
Sample rate: 32 to 96 kHz
Input return loss: (100 kHz to 10 MHz) >15 dB balanced, >25 dB unbalanced
Balanced input common mode voltage range:
±10V 50 Hz to 20 kHz
Output
Signal type: AES3 AC coupled
Number of outputs: Four per input Impedance: 110Ω
Connectors: Terminal block
Sample rate: 32 to 96 kHz
Input return loss: >15 dB (100 kHz, 10 MHz)
Performance
Reclocking: Yes DC offset: <±1 mV
Ability to lock jitter: 0.2 UI Intrinsic jitter: 0.025 UI
Electrical length: 135 µs @ 48 kHz (or ~6.5X sample rate period)
Other
User controls: Single/dual mode, input impedance
Operating temperature: 0° to 45°C
Humidity range: 0% to 90% non-condensing
Non-operating temperature: –10° to 70°C Remote – SNMP Alarm
Ordering Information
This module can be mounted in a GeckoFlex frame when ordered with the 8900A-R GeckoFlex Audio rear module.
8912RDA-D
Dual AES reclocking digital audio distribution amplifier
8900-A-CBL (Gecko Frames only)
Package of four three-terminal to dual BNC cables, used for unbalanced outputs on modules in a Gecko frame
8900-GFA-CBL (GeckoFlex Frames only)
Package of four three-terminal to dual BNC cables, used for unbalanced outputs on 8900A-R modules in a GeckoFlex frame
For detailed specifications, installation, and setup instructions see: www.grassvalley.com/docs/modular