GRASS Kinvaro T-65 Mounting And Adjustment Instruction
Mounting and adjustment instruc-
GB
tion of flap fitting Kinvaro T-65
Dear Customer,
In order to guarantee smooth and safe operation at all times, the installation instructions must be
followed exactly. Should you have any questions, please do not hesitate to contact us.
Yours, Hetal Werke
Application range
Flap weights
From pine (0.45 kg/dm
Yellow spring
Cabinet
height
in mm
250 0,9 – 2,1
300 0,7 – 1,7
250 1,8 – 4,2
300 1,4 – 3,4
350 1,0 – 2,9
400 0,8 – 2,5
450 0,7 – 2,2
500 0,6 – 2,0
weight
incl. handle*
Flap
in kg
3
) without handle, to MDF material (0.85 kg/dm3), 19 mm thick, with bar handle.
with 0,45 kg/dm
(e.g. pine)
with small with bar with small with bar with small with bar
handle handle* handle handle* handle handle*
yellow spring mounted one-sided
(up to flap width of 600 mm / spring must be mounted left side)
400 – 600 300* – 550 300* – 600 300* – 450 300* – 500 300* – 350
300* – 600 300* – 400 300* – 450 300* – 300 300* – 350 –
yellow spring mounted on both sides
800 – 1200** 450 – 1100 500 – 1200** 400 – 900 450 – 1000 350 – 750
550 – 1200** 350 – 800 400 – 900 300* – 650 300* – 700 300* – 500
350 – 950 300* – 600 300* – 650 300* – 450 300* – 500 300*400
300* – 700 300* – 450 300* – 500 300* – 350 300* – 350 300* – 300
300* – 550 300* – 400 300* – 400 300* – 300 300* –
300* – 450 300* 300* – – –
3
Flap width in mm
with 0,65 kg/dm
(e.g. chipboard)
3
with 0,85 kg/dm
(e.g. MDF)
3
Black spring
Cabinet
height
incl. handle*
in mm
250 2,4 – 7,4
300 2,0 – 6,3
350 1,7 – 5,4
400 1,5 – 4,7
450 1,3 – 4,2
500 1,3 – 3,9
550 1,3 – 3,4
600 1,3 – 3,1
° Bar handles must be included in the flap weight calculation at 0.15 kg per 100 mm handle width.
* Smaller flap widths possible (on request) ** Larger flap widths possible (on request)
In the upper and lower borderline areas, we recommend performing a trial mounting prior to series production.
Flap
weight
in kg
with 0,45 kg/dm
(e.g. pine)
with small with bar with small with bar with small with bar
handle handle* handle handle* handle handle*
1100 – 1200** 800 – 1200** 800 – 1200** 550 – 1200** 600 – 1200** 450 – 1200**
800 – 1200** 500 – 1200** 550 – 1200** 400* – 1200** 450 – 1200** 300 – 1000
550 – 1200** 350 – 1150 400 – 1200** 300* – 900 300 – 950 300* – 750
450 – 1200** 300* – 900 300* – 950 300* – 700 300* – 700 300* – 600
350 – 1000 300* – 750 300* – 750 300* – 600 300* – 550 300* – 450
300* – 900 300* – 650 300* – 600 300* – 450 300* – 450 300* – 400
300* – 700 – 300* – 500 – – –
300* – 600 – 300* – 400 – – –
3
Flap width in mm
with 0,65 kg/dm
(e.g. chipboard)
3
with 0,85 kg/dm
(e.g. MDF)
Exchanges of springs:
The spring attachment is brought into the end position by turning the adjustment screws to the left.
The fitting should be completely opened when exchanging the springs.
3
Drilling holes in side panels of
GB
Kinvaro T-65 cabinet carcass
Left hand side panel
(Right hand side panel mirror image)
Opening angle 100°
Attachment at side
panel:
4 x Countersunk
Euro screws
**buffer thickness 2 mm
top panel
flap
* These drilling
side panel
holes can be used
optionally for the
attachment of the
fitting.
The drilling pattern has to be exactly observed!
Loading...