These instructions are intended to assist users with the operation of the GXV3611 and also to
instruct on how to avoid dangerous situations or damage to the device.
Warnings: Serious injury or death may be caused if any of the warnings below are neglected.
Cautions: Injury or damage to the equipment may occur if any of the following caution
messages are neglected.
Warnings Follow these safeguards to prevent
serious injury or death.
Warnings:
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power
Source with DC 12V according to the IEC60950-1 standard. Please refer to the technical
specifications for more details.
Do not use a third-party power adapter or power cord
When the device is installed on the wall or ceiling, make sure that it is firmly attached.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Notice:
Make sure that the power supply voltage is correct before using the camera.
Do not drop the device or expose it to physical shock.
Do not expose the device to temperatures outside the range of -10
device is in operation.
Do not expose the device to damp/wet conditions or high electromagnetism radiation.
To avoid heat accumulation, make sure that your operating environment has proper
ventilation.
Do not attempt to open, disassemble, or modify the device
A few parts (e.g. electrolytic capacitor) of the equipment shall be replaced regularly according
to their average life time. The average life time varies from the differences between operating
environments and usage history. Regular maintenance checks are recommended for all
users. Please contact your dealer for more details.
Notice:
The smoke detector in the GXV 361 1 mini dome camera is not intended to replace any smoke
Firmware 1.0.4.6 Page 2 of 34
Grandstream Networks, Inc. 09/2010
o
C to +60oC when the
GXV3611 Mini IP Dome Camera
detector alarm system. The smoke detector does not comply with the National Alarm and
Signaling Code, nor does it provide any form of visual or audible signal to alert the premises
dwellers. You must not replace any existing smoke alarm system with this product.
Firmware 1.0.4.6 Page 3 of 34
Grandstream Networks, Inc. 09/2010
GXV3611 Mini IP Dome Camera
Contents
W elcome ......................................................................................................................................................... 5
Firmware 1.0.4.6 Page 4 of 34
Grandstream Networks, Inc. 09/2010
GXV3611 Mini IP Dome Camera
Welcome
The GXV3611 is a next generation mini IP dome camera for remote monitoring and
surveillance over your LAN or internet.
The GXV3611 combines best in class IP video technology and SIP protocols for a robust IP
surveillance solution. The product features H.264 video streams with up to 30 frames per
second in full D1, delivering rich image clarity at rapid transmission rates. Integrated SIP can
pass alarms to the PSTN, mobile phones, SIP IP phones, SIP videophones and enables
2-way VoIP communication.
The GXV3611 ensures ease of use, integration and deployment with a multilingual graphical
user interface. The GXV3611 can be quickly installed and connected to your network and
accessed from anywhere over the internet. Grandstream’s flexible video management
software enables users to monitor multiple environments in one easy to use application. The
intuitive web interface lets users easily access, manage, view and record live video streams
from the device.
The GXV3611 is a powerful solution for small to medium sized offices, homes and storage
facilities looking to safeguard their valuables.
Firmware 1.0.4.6 Page 5 of 34
Grandstream Networks, Inc. 09/2010
Package Contents
Items in the package:
• GXV3611 IP Camera
• 12V DC power Adapter
• Quick installation guide
GXV3611 Mini IP Dome Camera
Firmware 1.0.4.6 Page 6 of 34
Grandstream Networks, Inc. 09/2010
Product Overview
GXV3611 Overview
GXV3611 Side View
GXV3611 Mini IP Dome Camera
GXV3611 Sample Connection Diagram
Connectors and cables
PINs –Alarm In connector, and Alarm out
connector.
AUDIO IN – 3.5mm port for audio input
devices (microphone, pickup and etc.).
NETWORK – 10/100 Switch LAN port for
connecting to Ethernet. The indicator will be
steady for connection and flashing for
network activity.
AUDIO OUT – 3.5mm port for audio output
devices (speakers, and etc.).
Firmware 1.0.4.6 Page 7 of 34
Grandstream Networks, Inc. 09/2010
GXV3611 Mini IP Dome Camera
DC 12V – 12V DC power jack; UL Certified.
POWER – The indicator will be solid green if the power is on.
Ground – wire used for grounding
GXV3611 Key Features
The table below lists the key features the GXV3611 Supports.
0°C – 45°C(32°F–133°F)Humidity 10–90% RH(non–condensing)Output: 12VDC/1.5A; Input:100–240VAC, 50–60HzFCC Part 15, Subpart B Class B;EN 55022 Class B,EN61000-3-2,EN 61000-3-3, EN 55024, EN 60950-1;C-tick AS/NZS CISPR22, CISPR 24
Yes
0°C – 45°C(32°F–133°F)Humidity 10–90% RH (non–condensing)Output: 12VDC/1.5A; Input:100–240VAC, 50–60Hz FCC Part 15, Subpart B Class B;EN 55022 Class B, EN 61000-3-2,EN 61000-3-3, EN 55024, EN 60950-1;C-tick AS/NZS CISPR 22,CISPR 24
GXV3611 Mini IP Dome Camera
)
GXV3611 Lens Specification
Parameters GXV3611-HDGXV3611-LL
Lens Mount M12 M12
Lens Format 1/3” 2 Mega pixels 1/4”
Focal Length 4.2 mm 4.5 mm
Aperture (D/f’) 1.8 1.9
View Angle 71 64
Size
(Diameter x
Length 1 x Length
2
14x15.8mm 14x12.91mm
Firmware 1.0.4.6 Page 10 of 34
Grandstream Networks, Inc. 09/2010
GXV3611 Mini IP Dome Camera
Installation Guide
Minimum Recommended System Requirement
• Windows 2000 Server Professional, Windows XP, Windows Vista.
• CPU: Intel Pentium 4 or higher, 2 GHz.
• RAM: 1 GB (4 GB recommended for larger systems).
• Support for DirectX 8.0 and above.
.
Connect your GXV3611
Using the Power adapter as power supply
• Connect an RJ-45 cable to the NETWORK port of the GXV3611.
• Connect the other end of the RJ-45 cable to your network or PC.
• Connect the power supply to the DC 12V power jack on the back of the GXV3611.
• Connect the other end of the power supply to a wall outlet. The POWER LED will turn
solid green.
Using PoE as power supply:
• Connect an RJ-45 to the NETWORK port of GXV3611.
• Connect the other end of the RJ-45 cable to a PoE switch. The POWER indicator will
turn solid green.
NOTE: If you are going to connect the device to a hub/switch/router, please use a
straight-through cable. A cross over cable should be used if you are going to connect the
device directly to a PC.
Firmware 1.0.4.6 Page 11 of 34
Grandstream Networks, Inc. 09/2010
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.