Grandstream Networks GXV3504 User Manual

GXV3504

IP VIDEO SERVER

QuickStart
Guide

EN

PRECAUTIONS

• Do not attempt to open, disassemble, or modify the

device

• Do not use a third party power adapter

• Do not expose the GXV3504 to temperatures outside
the range of -10 C to +55 C

• Do not expose the GXV3504 to environments outside
of the following humidity range: 10-90% RH (non-

condensing)

o

o

PACKAGE CONTENTS

12V

GXV3504

Green Wire Cramper

Power Adapter

QUICKSTART GUIDE

1

CONNECTING THE GXV3504

Refer to the illustration below when following the
instructions on the next page.

Power Port

12V

Network
Port

Video
Input

Option A: Power

Adapter To AC Outlet

Option B: RJ45 Ethernet cable to

Power over Ethernet(PoE) switch

Video

Audio

Audio
Input

To an Analog
camera

NOTE: Choose Option A if using the power supply. Or choose

Option B if using a Power over Ethernet (PoE) switch.

2

Option A

Step 1: Insert the power adapter into the 12V DC port on

the GXV3504. Plug the other end of the adapter
into an AC power outlet.

Step 2: Plug an RJ45 Ethernet cable into the network

port. Plug the other into a hub, switch or router.

Step 3: Connect the video-out BNC cable of your

camera to one of the video input ports on the
GXV3504. If the analog camera supports audio
output, connect the audio-out BNC cable to one
of the audio input ports of the GXV3504.

Option B

Step 1: Plug an RJ45 Ethernet cable into the network

port. Plug the other end into a power over
Ethernet (PoE) switch.

Step 2: Connect the video-out BNC cable of your

camera to one of the video input ports on the
GXV3504. If the analog camera supports audio
output, connect the audio-out BNC cable to
one of the audio input ports of the GXV3504.

If the GXV3504 is properly connected, the POWER,
READY and NETWORK indicator lights will ash green.

3

GXV3504 CONFIGURATION

Conguring the GXV3504 using Microsoft
Internet Explorer

Step 1: Connect your PC and the GXV3504 to the same

network.

Step 2: Set the IP address of your PC to 192.168.1.X. Set

the default subnet mask of your PC to

255.255.255.0.

4

Step 3: Open Microsoft Internet Explorer on your PC.

Type 192.168.1.168 in the address bar.

Step 4: A pop-up window will appear with prompts for

a user name and password. The default
administrator user name and password are both
set to “admin” at the default factory congura-

tion.

5

Step 5: Once you log into the GXV3504’s web interface

Internet Explorer will indicate that “This website
wants to install to following add-on: ‘GSViewer.
cab’ from Grandstream Networks, Inc.”. Install
this add-on by following the instructions.

Step 6: Once the installation of GSViewX.cab completes

you will see the web page shown in the screen­ shot on the next page. Click the play button to
view the video feed.

6

Step 7: Click through the menu on the left hand side of

the web UI for more advanced conguration

parameters.

Please download the user manual and FAQ for more
detailed conguration instructions:
http://www.grandstream.com/support/gxv_series_surveil­lance/gxv350x/documents/gxv350x_usermanual_english.

pdf

7