Grandstream Networks GXV 3501 User Manual

GXV 3501

IP VIDEO SERVER

QuickStart
Guide

EN

PRECAUTIONS

• Do not attempt to open, disassemble, or modify the

device

• Do not use a third party power adapter

• Do not expose this device to temperatures outside

range of -10 C to +55 C

• Do not expose the GXV 3501 to environments
outside of the following humidity range: 10-90% RH

(non-condensing)

o o

PACKAGE CONTENTS

12V

GXV 3501

Green Wire Cramper

Power Adapter

QUICKSTART GUIDE

1

CONNECTING THE GXV 3501

Refer to the illustration below when following the
instructions on the next page.

Network Port

Power Port

12V

Option A: Power

Adapter To AC Outlet

Video

Option B: RJ45 Ethernet cable to

Power over Ethernet(PoE) switch

Video
Input

To an Analog
camera

NOTE: Choose Option A if using the power supply. Or choose

Option B if using a Power over Ethernet (PoE) switch.

2

Option A

Step 1: Insert the power adapter into the 12V DC port on

the GXV 3501. Plug the other end of the adapter

into an AC power outlet.

Step 2: Plug an RJ45 Ethernet cable into the network

port. Plug the other into a hub, switch or router.

Step 3: Connect the video-out BNC cable of an analog

camera to the video port on the GXV 3501.

Option B

Step 1: Plug an RJ45 Ethernet cable into the network

port. Plug the other end into a Power over
Ethernet (PoE) switch.

Step 2: Connect the video-out BNC cable of your

camera to the video input port of the GXV 3501.

If the GXV 3501 is properly connected, the POWER,
READY and NETWORK indicator lights will ash green.

3

GXV 3501 CONFIGURATION

Conguring the GXV 3501 using Microsoft
Internet Explorer

Step 1: Connect your PC and the GXV 3501 to the

same
network.

Step 2: Set the IP address of your PC to 192.168.1.X. Set

the default subnet mask of your PC to

4

Step 3: Open Microsoft Internet Explorer on your PC.

Type 192.168.1.168 in the address bar.

Step 4: A pop-up window will appear with prompts for

a user name and password. The default
administrator user name and password are both
set to “admin” at the default factory
conguration.

5 6

Step 5: Once you log into the GXV 3501’s web inter-

face

Internet Explorer will indicate that “This website
wants to install to following add-on: ‘GSViewer.
cab’ from Grandstream Networks, Inc.”.
Install this add-on by following the instructions.

Step 6: Once the installation of GSViewX.cab completes

you will see the web page shown in the screen­ shot on the next page. Click the play button to
view the video feed.

Step 7: Click through the menu on the left hand side of

the web UI for more advanced conguration

parameters.

Please download the user manual and FAQ for more
detailed conguration instructions:
http://www.grandstream.com/support/gxv_series_sur­veillance/gxv350x/documents/gxv350x_usermanual_
english.pdf

7 8