Grandstream Networks 486 User Manual

User Manual

HandyTone-486

Analog Telephone Adaptor

For SW Release Version 1.0.5.16

Grandstream Networks, Inc.

www.grandstream.com

HandyTone-486 User Manual Grandstream Networks, Inc.

Table of Contents

1 WELCOME......................................................................................................... 3

2 INSTALLATION.................................................................................................4

3 WHAT IS INCLUDED IN THE PACKAGE ......................................................... 5

3.1 SAFETY COMPLIANCES .................................................................................... 5

4 PRODUCT OVERVIEW...................................................................................... 6

4.1 KEY FEATURES ............................................................................................... 6

4.2 HARDWARE SPECIFICATION ............................................................................. 7

5 BASIC OPERATIONS........................................................................................ 8

5.1 GET FAMILIAR WITH KEY PAD AND VOICE PROMPT............................................. 8

5.2 MAKE PHONE CALLS ....................................................................................... 9

5.2.1 Calling phone or extension numbers ...................................................... 9

5.2.2 Direct IP calls.......................................................................................... 9

5.2.3 Blind Transfer ....................................................................................... 10

5.2.4 Attended Transfer................................................................................. 10

5.2.5 Send and Receive PSTN Calls Through PSTN Line Port..................... 11

5.3 CALL FEATURES............................................................................................ 11

5.3.1 Call Features Table .............................................................................. 11

5.3.2 PSTN Pass Through............................................................................. 12

5.4 LED LIGHT PATTERN INDICATION ................................................................... 12

6 CONFIGURATION GUIDE............................................................................... 13

6.1 CONFIGURING HANDYTONE-486 WAN IP THROUGH VOICE PROMPT ................ 13

6.1.1 DHCP Mode .........................................................................................13

6.1.2 STATIC IP Mode...................................................................................13

6.2 CONFIGURING HANDYTONE-486 WITH WEB BROWSER .................................... 13

6.2.1 Access the Web Configuration Menu.................................................... 13

6.2.2 End User Configuration ........................................................................ 13

6.2.3 Advanced User Configuration............................................................... 17

6.2.4 Saving the Configuration Changes....................................................... 24

6.2.5 Rebooting the HandyTone-486 from remote ........................................ 24

6.3 C

ONFIGURATION THROUGH A CENTRAL SERVER .............................................. 25

7 SOFTWARE UPGRADE.................................................................................. 26

7.1 U

7.2 U

PGRADE THROUGH HTTP............................................................................ 26

PGRADE THROUGH TFTP ............................................................................ 26

8 RESTORE FACTORY DEFAULT SETTING.................................................... 28

HandyTone-486 User Manual Grandstream Networks, Inc.

1 Welcome

Congratulations on becoming an owner of HandyTone-486. You made an excellent choice and we hope you will enjoy all its capabilities.

Grandstream's award-wining HandyTone-486 is an all-in-one VoIP integrated access device that features superb audio quality, rich functionalities, high level of integration, compactness and ultra-affordability. The HandyTone-486 is fully compatible with SIP industry standard and can interoperate with many other SIP compliant devices and software on the market.

Grandstream HandyTone-486 has been awarded the Best of Show product in 2004 Internet Telephony Conference and Expo.

HandyTone-486 User Manual Grandstream Networks, Inc.

2 Installation

HandyTone-486 Analog Telephone Adaptor is an all-in-one VoIP integrated device designed to be a total solution for networks providing VoIP services.

The HandyTone-486 VoIP functionalities are available via a regular analog telephone.

The following photo illustrates the appearance of a HandyTone-486.

Top View Side Views

RJ11

Telephone

(Phone)

RJ45

10M Ethernet

LAN - WAN

+5V/1200mA

BUTTON

RED LED

GREEN LED

Phone Line

(Line)

Interconnection Diagram of the HandyTone-486:

Internet ADSL/Cable

Modem Ethernet

PSTN

LINE

WAN

PHONE

LAN

RJ11

Analog Phone

Cordless Phone

PC PC

Fax

HandyTone-486 User Manual Grandstream Networks, Inc.

3 What is Included in the Package

The HandyTone-486 package contains:

1) One HandyTone-486

2) One universal power adaptor

3) One Ethernet cable

3.1 Safety Compliances

The HandyTone-486 is compliant with various safety standards including FCC/CE and C-tick. Its power adaptor is compliant with UL standard. The HandyTone-486 should only operate with the universal power adaptor provided in the package.

Warning: Please do not attempt to use a different power adaptor. Using other power adaptor may damage the HandyTone-486 and will void the manufacturer warranty.

Caution: Changes or modifications to this product not expressly approved by Grandstream, or operation of this product in any way other than as detailed by this User Manual, could void your manufacturer warranty.

Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose without the express written permission of Grandstream Networks, Inc..

HandyTone-486 User Manual Grandstream Networks, Inc.

4 Product Overview

4.1 Key Features

• Supports SIP 2.0(RFC 3261), TCP/UDP/IP, RTP/RTCP, HTTP, ICMP, ARP/RARP, DNS, DHCP (both client and server), NTP, PPPoE, STUN, TFTP, etc.

• Built-in router, NAT, Gateway and DMZ port forwarding

• Powerful digital signal processing (DSP) to ensure superb audio quality; advanced

adaptive jitter control and packet loss concealment technology

• Support various vocoders including G.711 (alaw and u-law), G.723.1 (5.3K/6.3K), G.726 (40K/32K/24K/16K), as well as G.728, G.729A/B, and iLBC.

• Support Caller ID/Name display or block, Hold, Call Waiting/Flash, Call Transfer, Call Forward, in-band and out-of-band DTMF, Dial Plans, etc.

• Support Call Waiting Caller ID

• Support fax pass through

• Support Silence Suppression, VAD (Voice Activity Detection), CNG (Comfort Noise

Generation), Line Echo Cancellation (G.168), and AGC (Automatic Gain Control)

• Support standard encryption and authentication (DIGEST using MD5 and MD5-sess)

• Support for Layer 2 (802.1Q VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)

• Support automated NAT traversal without manual manipulation of firewall/NAT

• Support device configuration via built-in IVR, Web browser or central configuration file

through TFTP or HTTP

• Support firmware upgrade via TFTP or HTTP with encrypted configuration files.

• Ultra compact (wallet size) and lightweight design, great companion for travelers

• Compact, lightweight Universal Power adapter.

HandyTone-486 User Manual Grandstream Networks, Inc.

4.2 Hardware Specification

The table below describes the difference among these models.

Model

LAN interface 1xRJ45 10Base-T WAN interface 1xRJ45 10Base-T FXS telephone port 1xFXS PSTN port 1x life line port Button 1 LED Green and red color Universal Switching

Power Adaptor

Dimension 70mm (W)

Weight 0.6lbs (0.3kg) Temperature 40 - 130oF

Humidity 10% - 90%

Compliance

HandyTone-486

Input: 100-240VAC 50-60 Hz Output: +5VDC, 1200mA,

UL certified

130mm (D) 27mm (H)

5 – 45oC

(non-condensing)

HandyTone-486 User Manual Grandstream Networks, Inc.

5 Basic Operations

5.1 Get Familiar with Key Pad and Voice Prompt

HandyTone-486 has stored a voice prompt menu for quick browsing and simple configuration.

To enter this voice prompt menu, simply press the button or “***” from the analog phone.

Menu Voice Prompt User’s Options

Main Menu “Enter a Main Option” Enter ‘*’ to menu_01

Enter 00-06, 99 menu option

01 “DHCP Mode”,

“Static IP Mode”

02 “IP Address “ + IP address It will prompt you with the current WAN IP

03 “Subnet “ + IP address Same as menu 02 04 “Gateway “ + IP address Same as menu 02 05 “DNS Server “ + IP address Same as menu 02 06 “TFTP Server “ + IP address Same as menu 02 47 “Direct IP Calling” When entered, you will be prompted a dial

86 “Voice Messages Pending”

“No Voice Messages”

99 “RESET” Enter ‘9’ to confirm the RESET

“Invalid Entry” Automatically return to Main Menu

Notes:

• Once the button is pressed, it enters the voice prompt main menu. If the button is

pressed again, while it is already in the voice prompt menu state, it jumps to “Direct IP Calling” option and dial tone plays in this state

• ‘*’ functions similar to ‘↓’ key of BT-100 phone to select the next menu option

• ‘#’ returns back to main MENU

• ‘9’ is similar to ENTER key in many cases to confirm an option

• All entered digit sequences have known lengths - 2 digits for menu option and 12 digits

for IP address. Once all digits are accumulated, it automatically processes them.

• Key entry cannot be deleted but the phone may prompt error once it is detected

Enter ‘9’ to toggle the selection

address. Enter 12 digit new IP address if in Static IP Mode

tone, then enter 12 digit IP address This menu can be also entered by pressing the button again Enter 9 to dial pre-configured phone number to retrieve VM

Enter MAC address to restore factory default setting

HandyTone-486 User Manual Grandstream Networks, Inc.

5.2 Make Phone Calls

5.2.1 Calling phone or extension numbers

There are currently two methods to make an extension number call:

a) Dial the numbers number directly and wait for 4 (default) seconds. b) Dial the numbers directly, and press # (assuming that “use #” as dial key is selected

in web configuration).

Other functions available during the call are call-waiting/flash, call-transfer, and callforwarding.

5.2.2 Direct IP calls

Direct IP calling allows two phones, that is, a HandyTone with an analog phone and another VoIP Device, to talk to each other in an ad hoc fashion without a SIP proxy. VoIP calls can be made between two phones if:

• both HandyTone ATA and other VoIP Device(i.e., another HandyTone ATA or other HandyTone ATA) have public IP addresses, or

• both HandyTone ATA and other VoIP Device(i.e., another HandyTone ATA or other HandyTone ATA) are on the same LAN using private or public IP addresses, or

• Both HandyTone ATA and other VoIP Device(i.e., another HandyTone ATA or other HandyTone ATA) can be connected through a router using public or private IP addresses.

To make a direct IP call, first pick up the analog phone or turn on the speakerphone on the analog phone, then follow Section 4.1 with voice prompt 47, followed by the 12-digit target IP address. Destination ports can also be specified using *4 (encoding for “:”) followed by the encoded port number. Following is a table of the encoding scheme for the most commonly used characters:

F 00 0 01 1 02 2 03 3 04 4 05 5 06 6 07 7 08 8 09 9 *0 . (dot character) *4 : (column character)

+ 19 hidden pages