Grand Piano V3 User Manual

GRAND PIANO
MIDI
TONE
GENERATOR
Manual
SAFETY PRECAUTIONS
COPYRIGHT
OVERVIEW
SAFETY INSTRUCTIONS
• Do not allow any liquid to come in contact with the device
• Do not place anything on top of the device
• Do not handle the power supply with wet hands
• Turn off all connected devices before you connect any new devices
Do not use or store the device where it is exposed to:
• dampness or wetness
• extreme temperature changes (i.e. do not store in a vehicle in winter)
• strong vibrations or jolts
HANDLING
• Use only the original cables and power supply
• Remove the cable only by pulling on the plug, not on the cable
• Do not expose the power adapter to any mechanical stress
CUSTOMER SERVICE
!
All the audio recordings V3SOUND uses on the sound boards are protected by copyright. V3SOUND alone has been given the right by all musicians involved to use this material. Any duplication, editing or any other copy of individual sounds by or given to a third party in any form (audio sampling CD, data storage device with individual sounds, download of
any le, etc.) is strictly forbidden.
Copyright © 2017 V3SOUND - Austria
TECHNICAL SPECIFICATIONS
• Master Volume
• Master Reverb
• 3 GB flash memory
• 16 MIDI channels
• 4 audio out (2 stereo)
• Polyphony 256 voice
• Ports available for 1 sustain foot pedal
• Dimensions: 12cm (L) x 12cm (W) x 6cm (H)
• Weight: 0.2kg
• USB Host
Thank you for choosing the V3 GRAND PIANO 3GB — the most modern technology inside an electronic musical instrument.
The third generation of our sound expander creates an open, lively and authentic sound, just like a real concert piano. The unmistakable timbre of two exclusive grand pianos await you, equipped with the latest in modelling algorithms: Imperial 290 of Vienna and Model “D,” constructed in Hamburg.
GRAND PIANO MODELLING ALGORITHM
String resonance – pedal down: Our new multi-layer algorithm creates a sound that perfectly simulates the real depth – the physical depth – of the instrument.
Sympathetic resonance: passive string resonance.
Note- O samples: Created with note velocity and leng th
Pedal On/O noise: Connect a sustain pedal to the unit.
Half pedal function: Use a controller pedal,
like ROLAND DP-10, to vary the sustain lengths.
Sustain pedal “grabbing:” Press the sustain pedal again after you release it to extend the resonance of the strings.
USER INTERFACE AND PORTS
Do not carry out any repairs at home, as this may result in permanent damage to the elec­tronics. Any guarantee claims are no longer valid in this case.
ACCESSORIES Manual and power adapter
POWER REQUIREMENT 9VDC / 1.0A
HUMIDITY max. 80%, non-condensing
OPERATING TEMPERATURE 10 to 40 degrees Celsius
2
This product conforms to the EMC Directive
The CE certication is available at
http://www.v3sound.com/2016/manuals/CE-FCC/CE report -EN55032-20.pdf
This product conforms to the FCC 47 CFR PART 15
http://www.v3sound.com/2016/manuals/CE-FCC/Verication%20-%20FCC.pdf
http://www.v3sound.com/2016/manuals/CE-FCC/FCC%20Part%2015%20B.pdf
V3SOUND GMBH Kirchplatz 7 - 6114 Kolsass - Austria - Europe
SUBPART B
POWER ON/OFF
USB-HOST
MIDI-THRU
MIDI-IN
MAIN REVERB
LED - POWER ON LED - MIDI MAIN VOLUMEN
1
Loading...
+ 4 hidden pages