Grand Hall Xs08alp, Xb10alp, Xb10ang Owner's Manual
Liquid Propane Gas (LPG) Grill
Model XB10ALP
Natural Gas (NG) Grill
Model XB10ANG
Operator's Manual
FREE HELP
FROM THE GRILL EXPERTS
At Grand Hall we're the experts on this
product and trained to help you with:
Assembly Questions
Ÿ
Grill Operation
Ÿ
Replacement of Damaged or Missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL # __________________
Ÿ
(see silver CSA label on main body of grill)
Models XB10ALP/NG
! !
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Ÿ
Use your grill at least 3 feet away from any
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences
and overhangs or sources of ignition including
pilot lights on water heaters and live electrical
appliances.
Ÿ
THIS GAS APPLIANCE IS DESIGNED FOR
OUTDOOR USE ONLY.
Never use this gas appliance on a balcony,
Ÿ
deck, or patio above the ground floor of your
home.
Never use your gas grill in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas grill housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury or death.
WARNING
Manual # P80151110A - Date:2010/05/05
Table of Contents
Primary Safety Warnings...........................1-3
Pre-Assembly Instructions..............................3
Part Diagrams and Lists..........................4-7
Assembly Instructions...............................8-11
Use & Care Instructions:
• Gas Safety and Leak Tests...........12-15
• Natural Gas Connection.........................15
• Use & Care Instructions - LCD......16-17
• Lighting Instructions.................................18
• Troubleshooting..........................................19
Cleaning and Maintenance..........................20
Cooking Guide........................................A1-A5
Frequently Asked Questions................A6-A7
Warranty Terms............................Back Cover
Registered and unregistered Trademarks held by
Grand Hall include the following:
Grand Hall and design®, DS Grill and design®,
Crossray™ Lateral Infrared Burner Technology, Command Flame®, Smooth Start® Electronic Ignition System,
Ceramic Savor Plates®, Sear-zzler®, Stainless Clad
Therma-Core® Cooking Grids, Grand Café and design®,
Grand Mark and design®, Grand Chef and design®,
Grand Royale and design®, Globe Café and design®,
Urban Café and design®, Smokeless Grill and design®.
Patents held by Grand Hall include the following:
The Crossray Burner System by Grand Hall is covered
by Australian Patent No. 2006100635, Chinese Patent
No. 960361, European Patent No. 1886606, French
Patent 0607231, German Patent No. 20 2006 012 212.5,
U.K Patent GB2440714, and U.S. Patent 7,475,632.
©2008 Grand Hall. All Rights Reserved.
! !
1.
Do not store or use gasoline or other
WARNING
flammable liquids or vapors in the
vicinity of this or any other appliances.
An LP cylinder not connected for use
2.
shall not be stored in the vicinity of
this or any other appliance.
! !
LPG models must be used with Liquid Propane
•
Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas
only. Any attempt to convert the grill from one fuel
type to another is extremely hazardous and will
void the warranty.
Keep gas regulator hose away from hot grill
•
surfaces and dripping grease. Avoid unnecessary
twisting of hose. Visually inspect hose prior to
each use for cuts, cracks, excessive wear or other
damage. If the hose appears damaged do not use
the gas grill. Call 1-877-934-7455 for a certified
replacement hose.
California Proposition 65
•
Combustion byproducts produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.
Brass components on the grill, such as hose fittings, propane cylinder valves (sold separately) and
burner valve stems, contain lead which is known to
the State of California to cause cancer, birth defects,
or other reproductive harm.
WARNING
! !
•
This appliance, when installed, must be electrically grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.
•
Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.
WARNING
Never use charcoal or lighter fluid in this gas grill.
•
Failure to comply with these instructions could result in a grease fire or explosion that could cause
serious bodily injury, death or property damage.
The Grease Tray must be visually inspected before
•
each grill use. Remove any grease and wash Grease
Tray with a mild soap and warm water solution.
Failure to comply with these instructions could
result in a grease fire or explosion that could
cause serious bodily injury, death or property
damage.
!
If you smell gas:
Shut off gas to the appliance.
1.
Extinguish any open flame.
2.
Open lid.
3.
If odor continues, keep away from the
4.
appliance and immediately call your
gas supplier or your fire department.
2
DANGER
!
Pre-Assembly Instructions For Your Safety
Congratulations on your selection of one of the finest outdoor kitchen appliances available. Your Grill is equipped
with the unique Crossray Infrared Cooking System® by Grand
Hall, which offers restaurant style grilling performance.
Infrared grilling technology cooks the food directly (and not
the air around it) which offers many advantages over con-
ventional grilling systems:
MORE FLAVORFUL FOOD as the intense heat sears the
food and locks in the juices while also cooking it faster
which usually means more succulence.
FEWER FLAREUPS as the higher infrared heat vaporizes more drippings which also adds natural flavoring to
your food.
MORE EFFICIENCY AND CONVENIENCE as the higher
heat means shorter cooking times, more fuel efficiency
and easier year round grilling.
To begin your “restaurant quality” grilling, become familiar
with all of the cooking elements of your Grand Hall Grill
lighting and operating instructions.
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
#2, #3 Phillips head screwdriver
•
You will need assistance from two people to handle
the grill head and other large, heavy parts.
Open Lid of shipping carton and remove top sheet of
cardboard and packing materials. Lay cardboard
sheet on floor and use as a work surface to protect
floor and grill parts from scratches.
You may slice the carton front corners with a utility knife
to lay open the carton front panel. This allows you to
raise the Lid and remove the components packed inside, making it easier to lift.
Use the Hardware and Part Diagrams to ensure all items
are included and free of damage.
Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when
you unpack the shipping box or you have questions
during the assembly process call 1-877-934-7455 MF 8AM-4:30PM CST for assistance.
US Patented No.: 7,475,632
Europe Patent No.: 1886606
Australia Patent No.: 2006100635
Germany Patent No.: 202006012212.5
France Patent No.: 0607231
UK Patent No.: GB2440714
China Patent No.: 960361
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane.
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
3
Hardware Pack Parts List for Models XB10ALP & XB10ANG
PART # PART DESCRIPTION QTY PURPOSE OF PART
P06030027AHardware Pack 1 For use in assembly of XB10ALP/NG
S182G03061
S162G04041Hex Head Screw 1/4"x1/4" 4
S182G04061Pan Head Screw 1/4"x3/8" 8
S182G03061
S182G03061
Pan Head Screw 3/16"x3/8"
Pan Head Screw 3/16"x3/8" 2
Pan Head Screw 3/16"x3/8" 3
2 Install Battery Bracket
Install Rear Trim Panel
Install Left/Right Trim Panel
Install the LP Regulator Brackets (for XB10ALP only)
Install the Tank Tray Set (for XB10ALP only)
Hardware Pack Diagram for Models XB10ALP & XB10ANG
Pan Head Screw
3/16"x3/8"
Qty. 2
Part # S182G03061
Pan Head Screw
3/16"x3/8"
Qty. 5 (for LPG only)
Part # S182G03061
Hex Head Screws
1/4"x1/4"
Qty. 4
Part # S162G04041
Pan Head Screw
1/4"x3/8"
Qty. 8
Part # S182G04061
Back Up Battery Parts List for Models XB10ALP & XB10ANG
PART # PART DESCRIPTION QTY PURPOSE OF PART
P05301005Q Spare Battery Box 1 Temporary Replacement for the Battery Pack/Rechargeable
Back Up Battery Diagram for Models XB10ALP & XB10ANG
* One Battery/AA included in the Hardware Pack.
Spare Battery Box
Qty. 1
Part # P05301005Q
4
Parts Diagram for Models XB10ALP & XB10ANG
1
8b(Optional)
20
25
6
14a
46
45
45a
47
8a(Optional)
13
15
16
26
8b(Optional)
11
12
18
17
6
41a
43
48
45
23
45a
8
44
21
5
14a
4
14
42
3
9
36
41a
2
1a
1a
3a
5
27
28
38
41
38a
35
33
34
40
53
29
31
28
52
51
30
29
50
10
49
7
32
31
39
30
42
37
66
65
64
57
63
58
62
62a
56
61
55
5
54
19
22
24
60
59
Parts List for Models XB10ALP & XB10ANG
KEY
DESCRIPTION
PART#
QTY
1 Lid Assembly Outer P0014513A5 1
1a Protective Pad P05518018I 2
2 Temperature Gauge P00601371A 1
3 Lid Handle P00215034F 1
3a Lid Handle Heat Insulating Spacer
4 Lid Assembly Inner P0014514EA 1
5 Lid Hinge P05547004D 2
6 Lid Bracket P033031165 2
7 Gas Fitting
8 Cooking Rack/Secondary P015160275 1
9 Cooking Grid P01615035F 4
10 Gas Fitting
11 Bowl Panel, Rear/Upper P00756026C 1
12 Bowl Panel Fixed Shield, Rear/Upper P0075603EC 1
13 Lid Spring Bracket Set, Left P055510037 1
14 Lid Spring Bracket Set, Right P055510047 1
14a Protective Pad for Spring Bracket P05518045I 2
15 Spring P05504113N 2
16 Bowl Frame A Panel, Rear P00725986Q 1
17 Bowl Frame A P0071384S5 1
18 Bowl Frame A Bracket P013180035 2
19 Regulator With Hose and Connector (LPG) P03631010A 1
20 Bowl Frame Trim Panel, Left P0076104B5 1
21 Bowl Frame Trim Panel, Right P0076105B5 1
22 Regulator Assembly (NG) P03614004C 1
23
24 Tank Tray Set (LPG) Y0340050 1
25 Control Panel Heat Shield P03009179A 1
26 Bowl Frame B P01318005B 1
27 Grease Tray Heat Shield P06904048C 1
28 Grease Shield, Lower P06902124C 2
29 Grease Shield, Upper P06902125C 2
30 Infrared Burner Assembly P02005023B 4
31 Cross Lighting Channel P02212377A 2
32 Bowl Assembly P0073963E5 1
33 Thermocouple for Gas Valve P05305047A 2
34 Thermocouple for Gas Valve P05305040D 2
35 Thermocouple for LED Light - Long P05305048A 2
36 Thermocouple for LED Light - Short P05305049A 2
37 Thermocouple Bracket P03327058C 2
38 Thermocouple Bracket P03327059C 2
38a Thermocouple/Ignition Electrode Cover P03343015C 4
39 Ignition Electrode P02614055A 4
40 Grease Tray P02717683C 1
41 Grease Tray Bracket Assembly P033271005 1
41a Grease Tray Slide Set P05516140M 1
42
43
44 Control Panel P02914278A 1
45 Control Knob Seat with LED Light and Wire – Long P03401394V 2
Cooking Rack Bracket/Secondary
Orifice (LPG) P06539028A 4
Orifice (NG) P06539029A 4
Gas Valve/Manifold Assembly (LPG) Y0060657 1
Gas Valve/Manifold Assembly (NG) Y0060658 1
P06802011F
P03902030A
P03907010A
P01529001A 4
1
1
1
6
Parts List for Models XB10ALP & XB10ANG
KEY DESCRIPTION PART# QTY
45a Control Knob Seat with LED Light and Wire – Short P03401414V 2
46 Control Knob P03401424V 4
47 LCD Heat Insulating Spacer P05357005D 1
48 LCD Assembly P05357018B 1
49 Connection Hose, 5/8" P03720001F 2
50 Connection Hose – Short P03702035F 2
51 Connection Hose P03718001A 1
52 Electric Wire, 4-Contact P02627011A 1
53 Electric Wire Set P02615150A 1
54 Lighting Stick P05507140M 1
55 Electric Ignitor, 4-Port P02502364C 1
56 Frame Assembly/Island P013060315 1
57 Decorative Panel P069090075 4
58 Trim Panel, Left P075050164 1
59 Trim Panel, Right P07504016A 1
60 Trim Panel, Rear P075150224 1
61 Battery Bracket P03348003C 1
62 Battery Pack/Rechargeable P05301010B 1
62a Battery Seat P05301009Q 1
63 Spare Battery Box P05301005Q 1
64 Charger P05384001B 1
65 Temperature Probe P05385001B 1
66 Connection Wire Set P02615177A 1
Hardware Pack P06030027A 1
Operator's Manual P80151110A 1
Optional Parts to Purchase for Models XB10ALP & XB10ANG
KEY DESCRIPTION PART# QTY
8a Griddle (optional) P057050035 1
8b Griddle Handle (optional) P055151255 2
For the repair or replacement parts you need:
Call 1-877-934-7455 M-F 8AM-4:30 PM CST
To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The following
information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on grill)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be dangerous
and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part replacement.
7
Assembly Instructions
CAUTION : While it is possible for one person to assemble this grill, obtain assistance from another person
when handling some of the larger, heavier pieces. Build your grill island before installing the LP Gas Tank and
Partition Panel (Not included in this unit). Refer to the heights listed in Fig. 4 for constructing your grill island.
Make sure a set of doors is installed in your Island so that the Control Box can be accessed. An island unit
is not included with the purchase of your Grill Head.
Install Trim Panels
1
Pan Head Screw
1/4"x3/8"
Qty. 8
Part # S182G04061
Lay a piece of cardboard on the ground (refer to Pre-Assembly Instructions). With the help of your assistant,
remove the Grill Head from the box and put it on the cardboard. Reserve the box for next step.
Remove all cooking components from the Grill Head. Raise the Grill Head and put it on top of the box
as shown.
Install Left Trim Panel onto the Left Bowl Panel using 4 Pan Head Screws 1/4"x3/8" and tighten securely.
Repeat for the Right Trim Panel.
Install the Rear Trim Panel onto the Left and Right Trim using 4 Hex Head Screws 1/4"x1/4" and tighten
securely.
Hex Head Screws
1/4"x1/4"
Qty. 4
Part # S162G04041
2
Install Battery Pack and Connect Electric Wires
Remove the Grease Tray.
Put the Battery Pack into Battery Bracket as shown.
Install the Battery Bracket onto the Grill Bowl using 2 Pan Head Screws 3/16’’x3/8’’ and tighten securely.
Remove the Wire Protector from the Connection Wire Set (reserve this part for later step). Thread the loose
end of the Connection Wire Set through the hole on the bottom of the Bowl as shown.
Replace the Wire Protector over the Connection Wire Set. Push the Wire Protector over the hole where
the Connection Wire has been threaded.
Connect loose end of Connection Wire Set to the Battery Pack. (Refer to the Use and Care InstructionsLCD on pages 16-17 for more information.)
Replace the Grease Tray.
Wire Protector
Pan Head Screw
3/16"x3/8"
Qty. 2
Part # S182G03061
8
Install Grill Head
3
With the assistance of another person, place the Grill Head into the cutout of your grill island as shown
in the Figure.
NOTE: This grill head is designed to fit into an island of your own design. The island shown is for
illustration purposes only and is not included with the purchase of this grill head. Be sure your island
meets the construction guidelines and clearances as indicated on page 12.
Install 12' Natural Gas Hose (not included in this unit)
4
Note: You will need to make 1 hole large enough for the Regulator Hose
to fit through the Island Side Panel.
Note: You will also need to make 1 hole large enough for the Hose to
fit through the Island Rear Panel.
Connect NG Regulator onto Gas Manifold.
Connect the Swivel nut of the 12' Natural Gas Hose (not included in this
unit) to the NG Gas Regulator.
Gas Manifold
Vertical Fitting
Swivel Nut
9
Loading...