Grand Hall Tsb10ang, Tsb10alp Owner's Manual
Liquid Propane Gas (LPG) Side Burner
Model TSB10ALP
Natural Gas (NG ) Side Burner
Model TSB10ANG
Operator's Manual
FREE HELP
FROM THE GRILL EXPERTS
Grand Hall is the expert on this product and
trained to help you with:
Assembly Questions
Ÿ
Side Burner Operation
Ÿ
Replacement of Damaged or Missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL # __________________
Ÿ
(see silver CSA label on main body of side burner lid)
Models TSB10ALP/NG
! !
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause serious
bodily injury, death or property damage.
Whether this side burner was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your side burner to ensure the side
burner is properly assembled, installed and maintained.
Use your side burner at least 3 feet away from
Ÿ
any wall or surface. Use your side burner at least
3 feet away from combustible objects that can melt
or catch fire such as vinyl or wood siding, fences and
overhangs or sources of ignition including pilot lights
on water heaters and live electrical appliances.
THIS GAS APPLIANCE IS DESIGNED FOR OUT-
Ÿ
DOOR USE ONLY.
Never use this gas appliance on a balcony, deck, or
Ÿ
patio above the ground floor of your home.
Never use your gas side burner in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas side burner housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your side burner is lit. A lit side burner
can ignite leaking gas and cause a fire or explosion
which could result in property damage, personal
injury or death.
WARNING
Manual # P80151113A - Date:2010/04/13
Table of Contents
Primary Safety Warnings...........................1-3
Pre-Assembly Instructions..............................3
Part Diagrams and Lists..........................4-6
Assembly Instructions................................7-9
LP Gas Tank Installation......................10-12
Natural Gas Connection..............................13
Use & Care Instructions:
• Lighting Instructions.................................14
• Troubleshooting.........................................15
Cleaning and Maintenance......................16-17
Frequently Asked Questions................A1-A2
Warranty Terms.............................Back Cover
! !
1.
Do not store or use gasoline or other
flammable liquids or vapors in the vicinity of this or any other appliances.
An LP cylinder not connected for use
2.
shall not be stored in the vicinity of
this or any other appliance.
WARNING
! !
•
Keep gas regulator hose away from hot side
•
burner surfaces and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose
prior to each use for cuts, cracks, excessive wear
or other damage. If the hose appears damaged
do not use the gas side burner. Call 1-877-934-
7455 for a certified replacement hose.
California Proposition 65
•
Combustion byproducts produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.
Brass components on the side burner, such as
hose fittings, propane cylinder valves (sold separately) and burner valve stems, contain lead which
is known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Never use charcoal or lighter fluid in this gas side
•
burner. Failure to comply with these instructions
could result in a grease fire or explosion that could
cause serious bodily injury, death or property damage.
WARNING
LPG models must be used with Liquid Propane
Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas
only. Any attempt to convert the side burner from
one fuel type to another is extremely hazardous
and will void the warranty.
! !
WARNING
Failure to remove Side Burner Lid
during the lighting procedures could
result in a fire or explosion that could
cause serious bodily injury, death, or
property damage.
! !
Your appliance will get very hot. Never lean over the
cooking area while using your side burner. Do not
touch cooking surfaces or any other side burner parts
while the side burner is in operation, or until the side
burner has cooled down after use. Failure to comply
with these instructions may result in serious bodily
injury.
WARNING
The Grease Tray must be visually inspected before
•
each side burner use. Remove any grease and
wash Grease Tray with a mild soap and warm water
solution. Failure to comply with these instructions
could result in a grease fire or explosion that could
cause serious bodily injury, death or property
damage.
!
DANGER
If you smell gas:
1.
Shut off gas to the appliance.
Extinguish any open flame.
2.
Open lid.
3.
If odor continues, keep away from
4.
the appliance and immediately call
your gas supplier or your fire department.
!
2
Pre-Assembly Instructions For Your Safety
! !
Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury.
Spiders and small insects can spin webs and nest
in the Burner Tubes during transit and warehousing
which can lead to a gas flow obstruction resulting
in a fire in and around the Burner Tubes. This type
of "FLASHBACK FIRE" can cause serious side
burner damage and create an unsafe operating
condition for the user.
CAUTION
To reduce the chance of FLASHBACK FIRE
you must clean the Burner Tubes as follows
before initial use. Also do this at least once a
month in summer and fall or whenever spiders are
active in your area, and if your side burner has not
been used for an extended period of time.
Remove the screws from the side burner body and the
1.
rear of each Burner using a Phillips Head Screwdriver.
Carefully lift each Burner up and away from the Gas
2.
Valve Orifice.
Check and clean Burner/Venturi Tubes for insects
3.
and insect nests. A clogged tube can lead to a fire
beneath the side burner.
Refer to the figure below and perform one of these
4.
3 cleaning methods:
METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown and run the hook
through the Burner Tube and inside the Burner
several times to remove debris.
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
Phillips head screwdriver
•
For your safety, obtain assistance from another
person when assembling this product.
Open Lid of shipping carton and remove top sheet of
cardboard and packing materials. Lay cardboard
sheet on floor and use as a work surface to protect
floor and side burner parts from scratches.
You may slice the carton front corners with a utility
knife to lay open the carton front panel. This allows
you to remove the components packed inside before
lifting the side burner out of the packaging.
Use the Hardware and Part Diagrams to ensure all
items are included and free of damage.
Do not assemble or operate the side burner if it appears damaged. If there are damaged or missing parts
when you unpack the shipping box or you have questions during the assembly process call: 1-877-934-
7455 Monday - Friday 8:00am-4:30pm CST
Side Burner Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane.
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
TO CLEAN BURNER TUBE,
INSERT HOOK HERE
9
METHOD 2: Use a bottle brush with a flexible
handle and run the brush through the Burner
Tube and inside the Burner several times to
remove any debris.
METHOD 3: Use an air hose to force air through
each Burner Tube. The forced air should pass
debris or obstructions through the Burner and out
the Ports.
For safe operation ensure the Gas Valve Assembly Orifice is inside the Burner Tube before using
your side burner. See figure. If the Orifice is not
inside the Burner Tube, lighting the Burner may
cause explosion and/or fire resulting in serious
bodily injury and/or property damage.
Gas Valve Assembly
Orifice
Burner Port
Burner Tube
Burner Tube
CSA Label located
inside the lid
3
Hardware Parts List for Models TSB10ALP & TSB10ANG
PART #
PART DESCRIPTION
QTY
PURPOSE OF PART
P06030020A
P06030021A
S112G0306A
Phillips Head Screw 3/16"x3/8"
2
S313G0305A
Flange Nut 3/16"
2
S112G03066
Phillips Head Screw 3/16"x3/8"
4
S313G03056
Flange Nut 3/16"
4
S112G03081
Phillips Head Screw 3/16"x1/2"
3
S313G03051
Flange Nut 3/16"
3
S112G03061
Phillips Head Screw 3/16"x3/8"
2
S313G03051
Flange Nut 3/16"
2
P05536001A
Hose Holder
1
P00215038A
Lid Knob
1
S112G03061
Phillips Head Screw 3/16"x3/8"
1
S233G04084
Wing Bolt 1/4"x1/2"
1
Already installed on the Tank Holder
Hardware Pack 1 For use in assembly of Model TSB10ALP
Hardware Pack 1 For use in assembly of Model TSB10ANG
Install the LP Regulator Bracket (for TSB10ALP)
Install the Tank Holder Brackets (for TSB10ALP)
Install NG Regulator Bracket (for TSB10ANG)
Install NG Regulator Hose to Side Panel (for
TSB10ANG)
Install Side Burner Lid Knob to Side Burner Lid
Secure the Tank Holder (for TSB10ALP)
Hardware Diagram for Models TSB10ALP & TSB10ANG
Phillips Head Screw
3/16"x3/8"
Qty. 2 (For LPG model)
Part # S112G0306A
Phillips Head Screw
3/16"x3/8"
Qty. 1 (For LPG model)
Qty. 3 (For NG model)
Part # S112G03061
Hose Holder
Qty. 1
Part # P05536001A
Flange Nut 3/16"
Qty. 2 (For LPG model)
Part # S313G0305A
Flange Nut 3/16"
Qty. 5 (For NG model)
Part # S313G03051
Already installed on the Tank Holder
Wing Bolt 1/4"x1/2"
Qty. 1 (For LPG model)
Part # S233G04084
Phillips Head Screw
3/16"x3/8"
Qty. 4 (For LPG model)
Part # S112G03066
Phillips Head Screw
3/16"x1/2"
Qty. 3 (For NG model)
Part # S112G03081
Flange Nut 3/16"
Qty. 4 (For LPG model)
Part # S313G03056
Lid Knob
Qty. 1
Part # P00215038A
* One Battery/AA included in the Hardware Pack.
4
Parts Diagram for Models TSB10ALP & TSB10ANG
1
2a
2
3
23
25
23a
24
19
6
22
11
20
9
6a
4
10
12
5
14
9
6b
13
18
18
16
26
15
27
28
17
29
21
8
5
7
Parts List for Models TSB10ALP & TSB10ANG
KEY DESCRIPTION PART # QTY
1 Knob/Side Burner Lid P00215038A 1
2 Lid P0011554AA 1
2a Lid Chain P05522002A 1
3 Pot Support P016040476 1
4 Side Burner Body P0073958FC 1
5 Side Burner Frame P0073961F4 1
6 Gas Valve/Manifold Assembly Y0060735 1
6a Connection Hose/Gas Manifold P03715018A 1
6b Gas Manifold P03715019B 1
7 Bracket for NG Regulator (NG) P033040544 1
8 Grease Tray P02718064B 1
9 Trim Plate Left/Right P03304064C 2
10 Side Burner Frame Support Bracket P03304059C 2
11 Control Panel P0290448IX 1
12 Panel, Rear P0075804FC 1
13 Side Burner P02004041A 2
14 Side Burner Cap P02013058E 2
15
16 Connection Hose, Short P03701033A 1
17 Connection Hose, Long P03701034A 1
18 Orifice Bracket P03328075C 2
19 Side Burner Electrode with Wire, Front P02618054A 1
20 Side Burner Electrode with Wire, Rear P02618055A 1
21 Regulator with Hose Assembly (NG) P03614007A 1
22 Electronic Ignitor - 2 Ports P02502252C 1
23 Control Knob P03411503L 2
23a Control Knob Spring P05504021A 2
24 Control Knob Seat P03415014S 2
25 Lighting Stick P05313026B 1
26 Regulator with Hose and Connector (LPG) P03601043A 1
27 Tank Holder Assembly (LPG) P05358003T 1
28 Tank Holder Bracket, Left (LPG) P03304055F 1
29 Tank Holder Bracket, Right (LPG) P03304056F 1
Side Burner Orifice (LPG) P06539034A 2
Side Burner Orifice (NG) P06539035A 2
Hardware Pack (LPG) P06030020A 1
Hardware Pack (NG) P06030021A 1
Operator Manual P80151113A 1
For the repair or replacement parts you need:
Call 1-877-934-7455 M-F 8AM-4:30PM CST
To obtain the correct replacement parts for your gas side burner, please refer to the part numbers in this
parts list. The following information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on side burner)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be dangerous and will also void your product warranty. Keep this Operator's Manual for
convenient referral and for part replacement.
6
Loading...