At Grand Hall we're the experts on this
product and trained to help you with:
Assembly questions
Ÿ
Grill operation
Ÿ
Replacement of damaged or missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL # __________________
Ÿ
(see silver CSA label on main body of grill)
!!
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Use your grill at least 3 feet away from any
Ÿ
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences and
overhangs or sources of ignition including pilot
lights on water heaters and live electrical appliances.
THIS GAS APPLIANCE IS DESIGNED FOR OUT-
Ÿ
DOOR USE ONLY.
Never use your gas grill in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas grill housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.
Registered and unregistered Trademarks held by
Grand Hall include the following:
Grand Hall and design®, T Grill and design®, Crossray™
Lateral Infrared Burner Technology, Command Flame®,
Smooth Start® Electronic Ignition System, Ceramic Savor
Plates®, Sear-zzler®, Stainless Clad Therma-Core®
Cooking Grids, Grand Café and design®, Grand Mark
and design®, Grand Chef and design®, Grand Royale
and design®, Globe Café and design®, Urban Café and
design®, Smokeless Grill and design®.
Patents held by Grand Hall include the following:
The Crossray Burner System by Grand Hall is covered
by Australian Patent No. 2006100635, Chinese Patent
No. 960361, European Patent No.: 1886606, French
Patent 0607231, German Patent No. 20 2006 012 212.5,
U.K Patent GB2440714, and U.S. Patent 7,475,632.
flammable liquids or vapors in the
vicinity of this or any other appliances.
An LP cylinder not connected for use
2.
shall not be stored in the vicinity of
this or any other appliance.
!!
LPG models must be used with Liquid Propane
•
Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas
only. Any attempt to convert the grill from one fuel
type to another is extremely hazardous and will
void the warranty.
Keep gas regulator hose away from hot grill
•
surfaces and dripping grease. Avoid unnecessary
twisting of hose. Visually inspect hose prior to
each use for cuts, cracks, excessive wear or other
damage. If the hose appears damaged do not use
the gas grill. Call 1-877-934-7455 for a certified
replacement hose.
California Proposition 65
•
Combustion byproducts produced when using this
product contain chemicals known to the State of
California to cause cancer, birth defects, or other
reproductive harm.
Brass components on the grill, such as hose fit-
•
tings, propane cylinder valves (sold separately) and
burner valve stems, contain lead which is known to
the State of California to cause cancer, birth defects,
or other reproductive harm.
WARNING
!!
•
This appliance, when installed, must be electrically grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.
•
Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.
!!
Never cover or wrap the Cooking Grids, bottom
of the Grill Bowl, or Grease Tray with aluminum
foil or any other material that will absorb grease.
WARNING
WARNING
Never use charcoal or lighter fluid in this gas grill.
•
Failure to comply with these instructions could result in a grease fire or explosion that could cause
serious bodily injury, death or property damage.
The Grease Tray must be visually inspected before
•
each grill use. Remove any grease and wash Grease
Tray with a mild soap and warm water solution.
Failure to comply with these instructions could
result in a grease fire or explosion that could
cause serious bodily injury, death or property
damage.
!
DANGER
If you smell gas:
Shut off gas to the appliance.
1.
Extinguish any open flame.
2.
Open lid.
3.
If odor continues, keep away from the
4.
appliance and immediately call your
gas supplier or your fire department.
2
!
Pre-Assembly Instructions For Your Safety
Congratulations on your selection of one of the finest outdoor kitchen appliances available. Your Grill is equipped
with the unique Crossray Infrared Cooking System® by Grand
Hall, which offers restaurant style grilling performance.
Infrared grilling technology cooks the food directly (and not
the air around it) which offers many advantages over con-
ventional grilling systems:
MORE FLAVORFUL FOOD as the intense heat sears
the food and locks in the juices while also cooking it
faster which usually means more succulence.
FEWER FLAREUPS as the higher infrared heat vaporizes more drippings which also adds natural flavoring
to your food.
MORE EFFICIENCY AND CONVENIENCE as the higher
heat means shorter cooking times, more fuel efficiency
and easier year round grilling.
To begin your “restaurant quality” grilling, become familiar
with all of the cooking elements of your Grand Hall Grill
lighting and operating instructions.
US Patented.: 7,475,632
European Patent No.: 1886606
Australia Patent No.: 2006100635
Germany Patent No.: 202006012212.5
France Patent No.: 0607231
UK Patent No.: GB2440714
China Patent No.: 960361
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
Phillips Head Screwdriver
•
You will need assistance from another person to
handle the grill head and other large, heavy parts.
Open Lid of shipping carton and remove top sheet of
cardboard and packing materials. Lay cardboard
sheet on floor and use as a work surface to protect
floor and grill parts from scratches.
You may slice the carton front corners with a utility
knife to lay open the carton front panel. This allows
you to raise the Lid and remove the components
packed inside, making it easier to lift.
Use the Hardware and Part Diagrams to ensure all
items are included and free of damage.
Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when
you unpack the shipping box or you have questions
during the assembly process call
1-877-934-7455 M-F 8AM-4:30PM CST for assistance.
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propance
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
CSA label
located on the
Right Panel of
the Cart Frame
3
Hardware Pack Part List for TG11ALP/NG & TG11BLP/NG
PART #PART DESCRIPTIONQTYPURPOSE OF PART
P06029001A Hardware Pack 1For use in assembly of Model TG11ALP/NG & TG11BLP/NG
S182G03062Pan Head Screw 3/16" x 3/8" 4
S182G03061Pan Head Screw 3/16" x 3/8"
P05515124L Wrench1 Tightens Casters
Attaches Side Shelves to Bowl Panel
2
Hardware Pack Diagram for TG11ALP/NG & TG11BLP/NG
Pan Head Screw 3/16"x3/8"
Qty. 4
Part # S182G03062
* One Battery/AA and Four Batteries/AAA included in the Hardware Pack.
Pan Head Screw 3/16"x3/8"
Qty. 2
Part # S182G03061
Wrench
Qty. 1
Part # P05515124L
4
Parts Diagram for Models TG11ALP/NG & TG11BLP/NG
1
2
68
3
4
5
19
6
7
8
38A
39
37
36
35
20
34
30
53
31
40
25
27
38B
21
29A
66
10
31
41
29B
67
26
32
44
50
13
51
15
30
28
55
24
16
33
53
26
14
25
11
16
54
60
23
18
12
17
43
9
21
22
61
62
63
42
49
52
49
56
59
58
59
58
48
47
46
45
64
65
5
Parts List for Models TG11ALP/NG & TG11BLP/NG
KEYDESCRIPTIONTG11ALP/NG PART #TG11BLP/NG PART # QTY
Lid Assembly Outer
Lid Assembly Inner
Lid Handle Heat Shield
Lid Handle Heat Insulating Spacer
Lid Handle
Lid Handle Grip-LP
Lid Handle Grip-NG
Cooking Rack/Secondary
Cooking Grid
Lid Hinge Bracket
Bowl Side Panel, Left
Bowl Side Panel, Right
Bowl Side Panel, Rear
Bowl Side Panel Trim Plate, Left
Bowl Side Panel Trim Plate, Right
Bowl Frame
Bowl Support Bracket
Gas Fitting Bracket
Gas Fitting
Side Shelf, Left
Side Shelf Decorative Panel, Left
Side Shelf Bracket
Side Shelf, Right
Decorative Panel for Side Shelf, Right
Bowl
Infrared Burner Assembly
Grease Shield
Thermocouple Bracket, Left
Thermocouple Bracket, Right
Thermocouple for LED Light, Left
Thermocouple for LED Light, Right
Electrode
Gas Valve Thermocouple
Gas Valve/Manifold Assembly-LP
Grease Tray Heat Shield
Gas Valve Heat Shield, Upper
Gas Valve Heat Shield, Lower
Decorative Front Cover
Control Panel
LED Light with Wire, Left
LED Light with Wire, Right
Control Knob Seat
Control Knob
Grease Draining Tray
Cart Frame, Front-LP
Cart Frame, Front-NG
Cart Frame, Rear
KEYDESCRIPTIONTG11ALP/NG PART #TG11BLP/NG PART # QTY
44
45
46
47
48
49
50
51
52
53
54
55
56
58
59
60
61
62
63
64
65
66
67
68
Cart Panel, LeftP04305024BP04305024B
DoorP04306024BP04306024B
Door Bracket
Cart Frame, Bottom
Gas Tank Protective Pad-LP
Door Magnet
Electric Ignitor Bracket
Electric Ignitor, 2-Port
LED Light Controller
Orifice-LP
Orifice-NG
Tank Fastening Strap
Tank Holder-LP
Lighting Stick Assembly
Caster, 2 in.,without brake
Caster, 2 in., with brake
Decorative Plate/Cart (LPG)
Connection Hose, 5/8"
Regulator With Hose-LP
Regulator -NG
Connection Hose, 7/16"
Store Shelf(Only for NG)
Electric Wire, 2-contact
Electrode Wire Set
Protective Pad
Hardware pack
Operator's Manual
To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list.
The following information is required to ensure you receive the correct parts:
1. Model and Serial Number (see CSA label on grill)
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement
part can be dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral
and for part replacement.
7
Assembly Instructions
CAUTION :
To assemble this grill, you should obtain assistance from another person when handling the larger, heavier pieces.
Install Casters onto Caster Seats
1
Open Lid of shipping carton and remove some packing materials. See Fig.1. With the help of your assistant,
laying down the Grill slowly. (Make sure the control knob is facing to ground side.) See Fig.2.
Install 4 Casters onto the Caster Seats using the Wrench provided. See Fig.3.
With your assistant, stand the Grill up carefully. See Fig.4.
Control Knob
9
Wrench
Qty. 1
Part # P05515124L
Caster, 2in.,
without brake
Caster, 2in.,
with brake
Wrench
Fig. 1
Fig. 2
Caster Seat
9
Fig.3
Caster, 2in., with brake
Fig. 4
8
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.