Grand Hall Sts3211bng, Sts3211blp, Sts3211ang, Sts3211alp, Sts2611blp Owner's Manual

...

By Barbeques Galore

Liquid Propane Gas (LPG) Grill

Models STS2611ALP, STS2611BLP, STS3211ALP & STS3211BLP

Natural Gas (NG ) Grill

Models STS2611ANG, STS2611BNG, STS3211ANG & STS3211BNG

STS2611BLP/NG STS3211BLP/NG

Operator's Manual

STS2611ALP/NG

Grill Information Center:

FREE HELP

STS3211ALP/NG

FROM THE GRILL EXPERTS

Grand Hall is the expert on this product and trained to help you with:

Assembly Questions

Grill Operation

Replacement of Damaged or Missing parts

visit www.grandhall.com or call: 1-877-934-7455

Monday - Friday 8:00am-4:30pm CST

IMPORTANT:

NOTE TO ASSEMBLER / INSTALLER:

Leave this manual with the consumer.

NOTE TO CONSUMER:

Keep this manual for future reference.

RECORD YOUR SERIAL #

__________________ (see silver CSA label on main body of grill)

! !

Failure to comply with these instructions could

result in a fire or explosion that could cause serious bodily injury, death or property damage. Whether this grill was assembled by you or

someone else, you must read this entire manual before using your grill to ensure the grill is properly assembled, installed and maintained.

Use your grill at least 3 feet away from any

wall or surface. Use your grill at least 3 feet away from combustible objects that can melt or

catch fire such as vinyl or wood siding, fences and overhangs or sources of ignition including pilot lights on water heaters and live electrical appliances. THIS GAS APPLIANCE IS DESIGNED FOR OUT-

DOOR USE ONLY. Never use your gas grill in a garage, porch,

shed, breezeway or any other enclosed area. Never obstruct the flow of ventilation air

around your gas grill housing. Never disconnect the gas regulator or any gas

fitting while your grill is lit. A lit grill can ignite leaking gas and cause a fire or explosion which could result in property damage, personal injury or death.

WARNING

Manual # P80151035A - Date:2011/01/21

Table of Contents

Primary Safety Warnings............................1-3

Pre-Assembly Instructions................................3

Part Diagrams and Lists............................4-20

Assembly Instructions.................................21-29

Use & Care Instructions:

• Gas Safety and Leak Tests..............30-33

• Natural Gas Connection............................34

• Lighting Instructions...................................35

• Troubleshooting...........................................36

• Rotisserie Instruction.............................37-39

Cleaning and Maintenance.......................40-41

Cooking Guide..........................................A1-A5

Frequently Asked Questions..................A6-A7

Repair Protection Agreements.....................A8

•

This appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the

National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1.

•

Keep any electrical supply cord and the fuel supply hose away from any heated surfaces.

If you smell gas:

WARNING

DANGER

Shut off gas to the appliance. Extinguish any open flame. Open lid. If odor continues, keep away from the appliance and immediately call your gas supplier or your fire department.

! !

Do not store or use gasoline or other

WARNING

flammable liquids or vapors in the vicinity of this or any other appliances. An LP cylinder not connected for

use shall not be stored in the vicinity of this or any other appliance.

! !

LPG models must be used with Liquid Propane

•

Gas and the regulator assembly supplied. Natural Gas models must be used with Natural Gas only. Any attempt to convert the grill from one fuel type to another is extremely hazardous and will void the warranty.

Keep gas regulator hose away from hot grill surfaces

•

and dripping grease. Avoid unnecessary twisting of hose. Visually inspect hose prior to each use for cuts, cracks, excessive wear or other damage. If the hose appears damaged do not use the gas grill. Call 1877-934-7455 for a certified replacement hose.

California Proposition 65

•

Combustion byproducts produced when using this product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

Brass components on the grill, such as hose fittings, propane cylinder valves (sold separately) and burner valve stems, contain lead which is known to the State of California to cause cancer, birth defects, or other reproductive harm.

Never use charcoal or lighter fluid in this gas grill.

•

Failure to comply with these instructions could result in a grease fire or explosion that could cause serious bodily injury, death or property damage.

WARNING

The Grease Tray must be visually inspected before each

•

grill use. Remove any grease and wash Grease Tray with a mild soap and warm water solution. Failure to

comply with these instructions could result in a grease fire or explosion that could cause serious bodily injury, death or property damage.

Pre-Assembly Instructions For Your Safety

! !

Failure to comply with these instructions may result in a hazardous situation which, if not avoided, may result in injury.

Spiders and small insects can spin webs and nest in the grill Burner Tubes during transit and warehousing which can lead to a gas flow obstruction resulting in a fire in and around the Burner Tubes. This type of "FLASHBACK FIRE" can cause serious grill damage and create an unsafe operating condition for the user.

To reduce the chance of FLASHBACK FIRE you must clean the Burner Tubes as follows before initial use. Also do this at least once a

month in summer and fall or whenever spiders are active in your area, and if your grill has not been used for an extended period of time.

CAUTION

PRE-ASSEMBLY

Read and perform the following pre-assembly instructions:

Tools Required for Assembly:

protective work gloves

•

protective eyewear

•

Phillips Head Screwdriver

•

You will need assistance from 2 people to handle the grill head and other large, heavy parts.

Open lid of shipping carton. Remove top sheet of cardboard and packing materials. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.

You may slice the carton front corners with a utility knife to lay open the carton front panel. This allows you to raise the Lid and remove the components packed inside, making it easier to lift.

Remove the screws from the rear of each Main Burner

1. using a Phillips Head Screwdriver.

Carefully lift each Burner up and away from the Gas

2. Valve Orifice.

Check and clean Burner/Venturi Tubes for insects and

3. insect nests. A clogged tube can lead to a fire beneath the grill.

Refer to the figure below and perform one of these

4. 3 cleaning methods:

METHOD 1: Bend a stiff wire or wire coat hanger into a small hook as shown and run the hook through the Burner Tube and inside the Burner several times to remove debris.

TO CLEAN BURNER TUBE, INSERT HOOK HERE

METHOD 2: Use a bottle brush with a flexible handle and run the brush through the Burner Tube and inside the Burner several times to remove any debris.

METHOD 3: Use an air hose to force air through each Burner Tube. The forced air should pass debris or obstructions through the Burner and out the Ports.

For safe operation ensure the Gas Valve Assembly Orifice is inside the Burner Tube before using your grill. See figure. If the Orifice is not inside the Burner Tube, lighting the Burner may cause explosion and/ or fire resulting in serious bodily injury and/or property damage.

Burner Port

Burner Tube

Foot

Use the Hardware and Part Diagrams to ensure all items are included and free of damage.

Do not throw away the bags of hardware that are included with boxed parts. These are required for assembly.

Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box or you have questions during the assembly process call

1-877-934-7455 M-F 8AM-4:30PM CST for assistance.

Grill Installation Codes

The installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural Gas and Propance Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2.

WARNING: Grease can get very hot. Always handle the Grease Tray with a flame retardant BBQ mitt. Before removing the Tray, always be sure that the grill has properly cooled. Be aware that the tray does contain grease and be extremely careful when removing the tray to prevent spillage. Failure to follow these instructions could cause serious bodily injury or property damage.

When using electrical appliances, basic safety precautions should always be used.

CAUTION

WARNING

Gas Valve Assembly

Orifice

Burner Tube

Hardware Parts List for Models STS2611ALP/NG & STS3211ALP/NG

PART #

PART DESCRIPTION

PURPOSE OF PART

P06006027A

Hardware Pack

For use in assembly of STS2611ALP/NG & STS3211ALP/NG

S112G0306E

Phillips Head Screw 3/16"x3/8"

S313G03051

Flange Nut 3/16"

S112G0306E

Phillips Head Screw 3/16"x3/8"

S313G03051

Flange Nut 3/16"

S112G0406E

Phillips Head Screw 1/4"x3/8"

P055010174

Side Shelf Lock

S112G0308E

Phillips Head Screw 3/16"×1/2"

S313G03051

Flange Nut 3/16"

S112G0306E

Phillips Head Screw 3/16"x3/8"

4 (LP)

2 (NG)

S313G03051

Flange Nut 3/16"

4 (LP)

2 (NG)

P05536001A

Hose Holder

2 (LP)

1 (NG)

Already Installed in the Bowl Brackets

Already installed on the Tank Holder

18428

QTY

Install the Bowl Brackets to the Cart (for STS2611ALP/NG &

14466

Install the Tank Holder Brackets (for STS2611ALP & STS3211ALP)

STS3211ALP/NG)

Install the Side Shelves (for STS2611ALP/NG & STS3211ALP/NG)

Install the Hose Holders (for STS2611ALP/NG & STS3211ALP/NG)

S182G04191Pan Head Screw 1/4"x1-3/16" Install the Bowl to the Cart (for STS2611ALP/NG & STS3211ALP/NG)

S233G04084Wing Bolt 1/4"x1/2" Install Tank Holder Assembly (for STS2611ALP & STS3211ALP)

Hardware Diagram for Models STS2611ALP/NG & STS3211ALP/NG

Phillips Head Screw 3/16"x3/8" Qty. 14 (for STS2611ALP & STS3211ALP) Qty. 8 (for STS2611ANG & STS3211ANG) Part # S112G0306E

Phillips Head Screw 3/16"x1/2" Qty. 2 (for STS2611ALP/NG & STS3211ALP/NG) Part # S112G0308E

Flange Nut 3/16" Qty. 22 (for STS2611ALP & STS3211ALP) Qty. 16 (for STS2611ANG & STS3211ANG) Part # S313G03051

Phillips Head Screw 1/4"x3/8" Qty. 8 (for STS2611ALP/NG & STS3211ALP/ NG) Part # S112G0406E

Side Shelf Lock Qty. 4 (for STS2611ALP/NG & STS3211ALP/NG) Part # P055010174

For Installing the Bowl to the Cart (Already installed in the Bowl Brackets)

Pan Head Screw 1/4"x1-3/16" Qty. 4 (for STS2611ALP/NG & STS3211ALP/NG) Part # S182G04191

Hose Holder Qty. 2 (for STS2611ALP & STS3211ALP) Qty. 1 (for STS2611ANG & STS3211ANG) Part # P05536001A

For Installing the Tank Holder Assembly (Already installed in Tank Holder Assembly)

Wing Bolt 1/4"x1/2" Qty. 1 (for STS2611ALP & STS3211ALP) Part # S233G04084

PART #

PART DESCRIPTION

QTY

PURPOSE OF PART

P06006023A

Hardware Pack

For use in assembly STS2611ALP & STS2611BLP

S112G0406E

Phillips Head Screw 1/4"x3/8"

S182G0406E

Pan Head Screw 1/4"x3/8"

S313G04081

Flange Nut 1/4"

S112G0306A

Phillips Head Screw 3/16"x3/8"

S313G0305A

Flange Nut 3/16"

S112G03066

Phillips Head Screw 3/16"x3/8"

Already installed on the Tank Holder

Hardware Parts List for Models STS2611ALP & STS2611BLP

Install Bowl Side Trim Brackets (for STS2611BLP)

Install the LP Regulator Bracket (for STS2611BLP)

S313G03066 Flange Nut 3/16" 4

Install the Tank Holder Brackets (for STS2611BLP)

S233G04084 Wing Bolt 1/4"x1/2" 1 Install Tank Holder Assembly (for STS2611BLP)

Hardware Diagram for Models STS2611ALP & STS2611BLP

Phillips Head Screw 1/4"x3/8" Qty. 12 (for STS2611BLP) Part # S112G0406E

Flange Nut 3/16" Qty. 2 (for STS2611BLP) Part # S313G0305A

Pan Head Screw 1/4"x3/8" Qty. 2 (for STS2611BLP) Part # S182G0406E

Phillips Head Screw 3/16"x3/8" Qty. 4 (for STS2611BLP) Part # S112G03066

Flange Nut 1/4" Qty. 8 (for STS2611BLP) Part # S313G04081

Flange Nut 3/16" Qty. 4 (for STS2611BLP) Part # S313G03066

Phillips Head Screw 3/16"x3/8" Qty. 2 (for STS2611BLP) Part # S112G0306A

For Installing the Tank Holder Assembly (Already installed in Tank Holder Assembly)

Wing Bolt 1/4"x1/2" Qty. 1 (for STS2611BLP) Part # S233G04084

*One Battery/AA included in the Hardware Pack (for STS2611ALP & STS2611BLP)

Hardware Parts List for Models STS3211ALP & STS3211BLP

PART #

PART DESCRIPTION

QTY

PURPOSE OF PART

Hardware Pack

For use in assembly for STS3211ALP & STS3211BLP

S112G0406E

Phillips Head Screw 1/4"x3/8"

S182G0406E

Pan Head Screw 1/4"x3/8"

S313G04081

Flange Nut 1/4"

S112G0308E

Phillips Head Screw 3/16"x1/2"

S362G0306E

Hex Nut 3/16"

S112G0306A

Phillips Head Screw 3/16"x3/8"

S313G0305A

Flange Nut 3/16"

S112G03066

Phillips Head Screw 3/16"x3/8"

S313G03066

Flange Nut 3/16"

Already installed on the Tank Holder

P06006025A

Install Bowl Side Trim Brackets (for STS3211BLP)

Install the Transformer (for STS3211ALP & STS3211BLP)

Install the LP Regulator Bracket (for STS3211BLP)

Install the Tank Holder Brackets (for STS3211BLP)

S233G04084 Wing Bolt 1/4"x1/2" 1 Install Tank Holder Assembly (for STS3211BLP)

Hardware Diagram for Models STS3211ALP & STS3211BLP

Phillips Head Screw 1/4"x3/8" Qty. 12 (for STS3211BLP) Part # S112G0406E

Phillips Head Screw 3/16"x1/2" Qty. 4 (for STS3211ALP & STS3211BLP) Part # S112G0308E

Phillips Head Screw 3/16"x3/8" Qty. 4 (for STS3211BLP) Part # S112G03066

For Installing the Tank Holder Assembly (Already installed in Tank Holder Assembly)

Pan Head Screw 1/4"x3/8" Qty. 2 (for STS3211BLP) Part # S182G0406E

Hex Nut 3/16" Qty. 4 (for STS3211ALP & STS3211BLP) Part # S362G0306E

Flange Nut 3/16" Qty. 4 (for STS3211BLP) Part # S313G03066

Flange Nut 1/4" Qty. 8 (for STS3211BLP) Part # S313G04081

Phillips Head Screw 3/16"x3/8" Qty. 2 (for STS3211BLP) Part # S112G0306A

Flange Nut 3/16" Qty. 2 (for STS3211BLP) Part # S313G0305A

Wing Bolt 1/4"x1/2" Qty. 1 (for STS3211BLP) Part # S233G04084

*One Battery/AA included in the Hardware Pack (for STS3211ALP & STS3211BLP)

Hardware Pack for Models STS2611ANG & STS2611BNG

Flange Nut 3/16"

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06006024A Hardware Pack 1 For use in assembly for Models STS2611ANG & STS2611BNG S112G0406E Phillips Head Screw 1/4"x3/8" 12 S182G0406E Pan Head Screw 1/4"x3/8" 2

Install Bowl Side Trim Brackets (for STS2611BNG)

S313G04081 Flange Nut 1/4" 8 S112G0304E Phillips Head Screw 3/16"x1/4" 2 Install the NG Regulator (for STS2611ANG & STS2611BNG) S112G0308E Phillips Head Screw 3/16"x1/2" 3

S313G03051

Install NG Regulator Bracket (for STS2611BNG)

Hardware Diagram for Models STS2611ANG & STS2611BNG

Phillips Head Screw 1/4"x3/8" Qty. 12 (for STS2611BNG) Part # S112G0406E

Phillips Head Screw 3/16"x1/2" Qty. 3 (for STS2611BNG) Part # S112G0308E

Pan Head Screw 1/4"x3/8" Qty. 2 (for STS2611BNG) Part # S182G0406E

Flange Nut 3/16" Qty. 3 (for STS2611BNG) Part # S313G03051

Flange Nut 1/4" Qty. 8 (for STS2611BNG) Part # S313G04081

*One Battery/AA included in the Hardware Pack (for STS2611ANG & STS2611BNG)

Phillips Head Screw 3/16"x1/4" Qty. 2 (for STS2611ANG & STS2611BNG) Part # S112G0304E

Hardware Parts List for Models STS3211ANG & STS3211BNG

PART # PART DESCRIPTION QTY PURPOSE OF PART

P06006026A Hardware Pack 1 For use in assembly for STS3211ANG & STS3211BNG S112G0406E Phillips Head Screw 1/4"x3/8" 12 S182G0406E Pan Head Screw 1/4"x3/8" 2

Install Bowl Side Trim Brackets (for STS3211BNG)

S313G04081 Flange Nut 1/4" 8 S112G0308E Phillips Head Screw 3/16"x1/2" 4 S362G0306E Hex Nut 3/16" 4

Install the Transformer (for STS3211ANG &STS3211BNG)

S112G0304E Phillips Head Screw 3/16"x1/4" 2 Install the NG Regulator (for STS3211ANG & STS3211BNG) S112G0308E Phillips Head Screw 3/16"x1/2" 3

S313G03051

Install NG Regulator Bracket (for STS3211BNG)

Hardware Diagram for Models STS3211ANG & STS3211BNG

Phillips Head Screw 1/4"x3/8"

Qty. 12 (for STS3211BNG)

Part # S112G0406E

Phillips Head Screw 3/16"x1/4"

Qty. 2

(for STS3211ANG & STS3211BNG)

Part # S112G0304E

*One Battery/AA included in the Hardware Pack (for STS3211ANG & STS3211BNG)

Pan Head Screw 1/4"x3/8" Qty. 2 (for STS3211BNG) Part # S182G0406E

Phillips Head Screw 3/16"x1/2" Qty. 4 (for STS3211ANG) Qty. 7 (for STS3211BNG) Part # S112G0308E

Flange Nut 1/4" Qty. 8 (for STS3211BNG) Part # S313G04081

Flange Nut 3/16" Qty. 3 (for STS3211BNG) Part # S313G03051

Hex Nut 3/16" Qty. 4 (for STS3211ANG & STS3211BNG) Part # S362G0306E

Parts Diagram for Models STS2611ALP/NG

62 45A

10A

37B

10B

37A

76A

56A

56B

45B

65 64

Parts List for Model STS2611ALP/NG

KEY DESCRIPTION PART# QTY

1 Lid Assembly P001462764 1 2 Temperature Gauge P00601071A 1 3 Lid Handle Bracket, Left P03303124A 1 4 Lid Handle Bracket, Right P03303125A 1 5 Lid Handle P00218001R 1 6 Protective Pad P05518002I 4 7 Cooking Rack/Secondary P01505009K 1 8 Cooking Grid, 13" P01604013B 2

9 Burner/Main P02003003B 4 10A 10B

11 12 Burner Bracket Assembly P022092154 1 13 Cart Wind Shield, Rear P069060794 1 14 Rotisserie Burner Wind Shield P069060804 1 15 Connecting Hose for Rotisserie Burner P03717056A 1

16 17 Rotisserie Burner Assembly P02007072A 1

18 Bowl Assembly P0071374D4 1 19 Thermocouple Bracket/Rotisserie Burner P033280494 1 20 Lid Hinge P05501020A 2 21 Door Handle P00218003R 2 22 Bowl Grease Shield P069020184 2 23 Lighting Tube P05507012A 1 24 Bowl Heat Shield P069040514 1 25 Electric Ignitor Protector P03328048Q 1 26 Electric Wire Set P02627009A 1 27 28 29

30 31 Door Guide Plate P055100244 1

32 Hose, 12FT. (NG) 3/8"ID P03703001A 1 33 Door Handle Bracket P00217002I 4 34 Control Panel Heat Shield P06919003B 1 35

36 37A Control Knob/Main Burner P03419583L 4 37B Control Knob/Rotisserie/Infrared Burner P03419593L 1

38 Control Knob Seat P03413033J 5

39 Electric Ignitor, 5-Port P02502298C 1

40 Grease Tray Assembly P027064034 1

41 Extension Tube P03720003A 1

42 Regulator with Hose (LPG) P03601040A 1

43 Lighting Stick P05313025B 1

44 Cart Panel/Rear P077010824 1 45A Bowl Bracket, Left P01301014K 1 45B Bowl Bracket, Right P01302014K 1

46 Cart Bottom Shelf P010060524 1

47 Cart Side Panel, Left P076170484 1

Flame Tamer/Ceramic, Front Flame Tamer/Ceramic, Rear Flame Tamer Rack

Rotisserie Burner Orifice (LPG) P06534005A 1 Rotisserie Burner Orifice (NG) P06534009A 1

Gas Collector Box with Electrode Electrode Wire Set Extension Fitting for Manifold Gas Valve/Manifold Assembly (LPG) Y0060675 1 Gas Valve/Manifold Assembly (NG) Y0060676 1

Control Panel, Upper Control Panel, Lower

P01804012A 4 P01804013A 4 P01720038B 1

P026090154 4 P02615160A 1 P03902029A 1

P02913441X 1 P02913456X 1

Parts List for Models STS2611ALP/NG

KEY DESCRIPTION PART# QTY

48 Cart Side Panel, Right P076180494 1

49 Door Hinge Bracket, Upper Left P033020144 1

50 Door Hinge Bracket, Upper Right P033020154 1

51 Door Hinge, Left/Lower P033020374 1

52 Door Hinge, Right/Lower P033020384 1

53 Cart Bracket, Front P033050744 1

54 Tank Holder Assembly (LPG) P053580034 1

55 Slide Set P05516013C 2 56A Slide Set Support, Left P033280664 1 56B Slide Set Support, Right P033280674 1

57 Tank Tray P040110024 1

58 Caster Seat, Right Front/Left Rear P03305078F 2

59 Caster, 2.5" with Brake P05110006D 4

60 Door Assembly, Left P043020514 1

61 Door Assembly, Right P043030514 1

62 Side Shelf Lock P055010174 4

63 Side Shelf Bracket, Left P03311046C 1

64 Side Shelf P011050424 2

65 Side Shelf Bracket, Right P03311047C 1

66 Door Magnet P05523004K 4

67 Weight P05344003Q 1

68 Caster Seat, Left Front/Right Rear P03305079F 2

69 Tank Holder Bracket, Left (LPG) P033040554 1

70 Tank Holder Bracket, Right (LPG) P033040564 1

71 Lid Handle Heat Insulating Spacer P06802007A 2

72 Rotisserie Burner Wind Shield P069060824 1

73 Thermocouple for Rotisserie Burner P05305062A 1

74 Rotisserie Burner Frame P020110654 1

75 Rotisserie Burner Electrode P02614025A 1

76 Regulator with Hose Assembly (NG) P03614007A 1 76A Bracket for NG Regulator (NG) P033040544 1

78 Gas Valve/Manifold Extension P05005392G 1

Hose Holder/Grill (LPG) P055360014 2 Hose Holder/Grill (NG) P055360014 1

Rotisserie Assembly Y0250171 1 Hardware Pack (Cart) P06006027A 1 Hardware Pack (LPG) P06006023A 1 Hardware Pack (NG) P06006024A 1 Operator's Manual P80151035A 1

Parts Diagram for Models STS3211ALP/NG

68 49A

53 55

54 30

62A

11A

62B

11B

41A

4445

41B

49B

81A

Parts List for Models STS3211ALP/NG

KEY DESCRIPTION PART# QTY

1 Lid Assembly P001473364 1 2 Temperature Gauge P00601071A 1 3 Lid Handle Bracket, Left P03303124A 1 4 Lid Handle Bracket, Right P03303125A 1 5 Lid Handle P00218002R 1 6 Protective Pad P05518002I 4 7 Cooking Rack/Secondary P01516004B 1 8 Cooking Grid, 13" P01604013B 2 9 Burner/Main P02003003B 3

10 Infrared Burner P02005026B 1 11A Flame Tamer/Ceramic, Front P01804012A 3 11B Flame Tamer/Ceramic, Rear P01804013A 3

12 Flame Tamer Rack P01722002B 1

13 Burner Heat Shield P069060454 1

14 Burner Bracket Assembly P02203145A 1

15 Cart Wind Shield, Rear P069060814 1

16 Rotisserie Burner Wind Shield P069060464 1

17 Light Cover Set P053830034 2

18 Light, 12V, 10W P05383002B 2

20 Rotisserie Burner Assembly P02007072A 1

21 Rotisserie Burner Extension Tube P03717050B 1

22 Bowl Assembly P0071375D4 1

23 Door Handle P00218003R 3

24 Light Wire Set P05352005B 1

25 Hose, 12FT. (NG) 3/8"ID P03703001A 1

26 Bowl Grease Shield P069020184 2

27 Bowl Heat Shield P069030564 1

28 Transformer P05374003B 1

29 Lighting Tube P05507012A 1

30 Door Handle Bracket P00217002I 6

31 Gas Collector Box with Electrode P026090154 3

32 Electrode Wire Set P02615161A 1

33 Extension Fitting for Manifold P03902029A 1

34 Gas Valve/Manifold Extension P05005392G 1

36 Lid Hinge P05501020A 2

37 Thermocouple Bracket/Rotisserie Burner P033280494 1

38 Control Panel Heat Shield P06919002B 1

39 Control Panel, Upper P02915271X 1

40 Control Panel, Lower P02915286X 1 41A Control Knob/Main Burner P03419583L 3 41B Control Knob/Rotisserie/Infrared Burner P03419593L 2

42 Control Knob Seat P03413033J 5

43 Switch for Light P05360002B 1

44 Electric Ignitor, 5-Port P02502298C 1

45 Grease Tray Assembly P027071034 1

46 Extension Tube P03720003A 1

47 Regulator with Hose (LPG) P03601040A 1

48 Lighting Stick P05313022B 1 49A Bowl Bracket, Left P01301014K 1 49B Bowl Bracket, Right P01302014K 1

50 Cart Side Panel, Right P076180494 1

51 Cart Panel/Rear P077021144 1

Rotisserie Burner Orifice (LPG) P06534005A 1 Rotisserie Burner Orifice (NG) P06534009A 1

Gas Valve/Manifold Assembly (LPG) Y0060673 1 Gas Valve/Manifold Assembly (NG) Y0060674 1

Parts List for Models STS3211ALP/NG

KEY DESCRIPTION PART# QTY

52 Cart Bottom Shelf P010020714 1

53 Door Hinge Bracket, Upper Left P033020144 1

54 Door Hinge, Left/Lower P033020374 1

55 Cart Side Panel, Left P076170484 1

56 Side Shelf Bracket, Rear P033110454 1

57 Cart Bracket, Front P033050804 1

58 Side Shelf Bracket, Front P033110424 1

59 Tank Holder Assembly (LPG) P053580034 1

60 Tank Tray P040110024 1

61 Slide Set P05516013C 2 62A Slide Set Support, Left P033280664 1 62B Slide Set Support, Right P033280674 1

63 Caster Seat, Right Front/Left Rear P03305078F 2

64 Caster, 2.5" with Brake P05110006D 4

65 Door Assembly P043010464 1

66 Drawer Assembly P01913002I 2

67 Slide Set for Drawer P05516141C 4

68 Side Shelf Lock P055010174 4

69 Side Shelf Bracket, Left P03311046C 1

70 Side Shelf P011050424 2

71 Cooking Grid, 6.5" P01604031B 1

72 Caster Seat, Left Front/Right Rear P03305079F 2

73 Door Magnet P05523004K 2

74 Weight P05344009Q 1

75 Lid Handle Heat Insulating Spacer P06802007A 2

76 Rotisserie Burner Wind Shield P069060824 1

77 Rotisserie Burner Electrode P02614025A 1

78 Thermocouple for Rotisserie Burner P05305051A 1

79 Rotisserie Burner Frame P020110664 1

80 Infrared Burner Electrode/Thermocouple Assembly P02614056A 1

81 Regulator with Hose Assembly (NG) P03614007A 1 81A Bracket for NG Regulator (NG) P033040544 1

83 Tank Holder Bracket, Left (LPG) P033040554 1

84 Tank Holder Bracket, Right (LPG) P033040564 1

85 Side Shelf Bracket, Right P03311047C 1

86 Door Guide Plate P055100244 1

87 Electric Ignitor Protector P03328048Q 1

88 Electric Wire Set P02627010A 1

89 Thermocouple for Infrared Burner P05305050A 1

90 Thermocouple Bracket P03343008C 1

Hose Holder/Grill (LPG) P055360014 2 Hose Holder/Grill (NG) P055360014 1

Rotisserie Assembly Y0250172 1 Hardware Pack (Cart) P06006027A 1 Hardware Pack (LPG) P06006025A 1 Hardware Pack (NG) P06006026A 1 Operator's Manual P80151035A 1

For the repair or replacement parts you need:

Call 1-877-934-7455 M-F 8AM-4:30 PM CST

To obtain the correct replacement parts for your gas grill, please refer to the part numbers in this parts list. The following information is required to ensure you receive the correct parts:

1. Model and Serial Number (see CSA label on grill)

2. Part Number

3. Part Description

4. Quantity of parts needed

Important: Use only Grand Hall replacement parts. The use of any part that is not a Grand Hall replacement part can be dangerous and will also void your product warranty. Keep this Operator's Manual for convenient referral and for part replacement.

Parts Diagram for Models STS2611BLP/NG

10A

10B

37A

37B

51A

53 32

Parts List for Models STS2611BLP/NG

KEY DESCRIPTION PART# QTY

9 Burner/Main P02003003B 4 10A 10B

11 12 Burner Bracket Assembly P022092154 1 13 Cart Wind Shield, Rear P069060794 1 14 Rotisserie Burner Wind Shield P069060804 1 15 Connecting Hose for Rotisserie Burner P03717056A 1

16 17 Rotisserie Burner Assembly P02007072A 1

18 Bowl Assembly P0071374D4 1 19 Thermocouple Bracket/Rotisserie Burner P033280494 1 20 Lid Hinge P05501020A 2 21 Bowl Trim Bracket, Right 22 Bowl Grease Shield P069020184 2 23 Lighting Tube P05507012A 1 24 Bowl Heat Shield P069040514 1 25 Bowl Trim Bracket, Left 26 Electric Wire Set P02627009A 1 27 28 29

30 31 Gas Valve/Manifold Extension P05005392G 2

32 Hose, 12FT. (NG) 3/8"ID P03703001A 1 33 Bowl Bracket, Right P01302014K 1 34 Control Panel Heat Shield P06919003B 1 35

36 37A Control Knob/Main Burner P03419583L 4 37B Control Knob/Rotisserie/Infrared Burner P03419593L 1

38 Control Knob Seat P03413033J 5

39 Electric Ignitor, 5-Port P02502298C 1

40 Grease Tray Assembly P027064034 1

41 Extension Tube P03720003A 1

42 Regulator with Hose (LPG) P03601043A 1

43 Lighting Stick P05313025B 1

44 Lid Handle Heat Insulating Spacer P06802007A 2

45 Tank Holder Assembly (LPG) P05358003H 1

Flame Tamer/Ceramic, Front Flame Tamer/Ceramic, Rear Flame Tamer Rack

Rotisserie Burner Orifice (LPG) P06534005A 1 Rotisserie Burner Orifice (NG) P06534009A 1

Gas Collector Box with Electrode Electrode Wire Set Extension Fitting for Manifold Gas Valve/Manifold Assembly (LPG) Y0060675 1 Gas Valve/Manifold Assembly (NG) Y0060676 1

Control Panel, Upper Control Panel, Lower

P01804012A 4 P01804013A 4 P01720038B 1

P079010374

P079010364

P026090154 4 P02615160A 1 P03902029A 1

P02913441X 1 P02913456X 1

+ 34 hidden pages

Grand Hall Sts3211bng, Sts3211blp, Sts3211ang, Sts3211alp, Sts2611blp Owner's Manual

Specifications and Main Features

Frequently Asked Questions

User Manual