Grand Hall B2610ang, B3210alp, B3210ang Owner's Manual
Liquid Propane Gas (LPG) Grill
Models B2610ALP, B3210ALP
Natural Gas (NG ) Grill
Models B2610ANG, B3210ANG
Operator's Manual
B2610ALP/NG
Grill Information Center:
FREE HELP
FROM THE GRILL EXPERTS
Grand Hall is the expert on this product
and trained to help you with:
Assembly Questions
Ÿ
Grill Operation
Ÿ
Replacement of Damaged or Missing parts
Ÿ
visit www.grandhall.com or call:
1-877-934-7455
Monday - Friday 8:00am-4:30pm CST
IMPORTANT:
NOTE TO ASSEMBLER / INSTALLER:
Ÿ
Leave this manual with the consumer.
NOTE TO CONSUMER:
Ÿ
Keep this manual for future reference.
RECORD YOUR SERIAL #
Ÿ
__________________
(see silver CSA label on main body of grill)
B3210ALP/NG
! !
Failure to comply with these instructions could
Ÿ
result in a fire or explosion that could cause
serious bodily injury, death or property damage.
Whether this grill was assembled by you or
Ÿ
someone else, you must read this entire manual
before using your grill to ensure the grill is
properly assembled, installed and maintained.
Use your grill at least 3 feet away from any
Ÿ
wall or surface. Use your grill at least 3 feet
away from combustible objects that can melt or
catch fire such as vinyl or wood siding, fences
and overhangs or sources of ignition including
pilot lights on water heaters and live electrical
appliances.
THIS GAS APPLIANCE IS DESIGNED FOR OUT-
Ÿ
DOOR USE ONLY.
Never use your gas grill in a garage, porch,
Ÿ
shed, breezeway or any other enclosed area.
Never obstruct the flow of ventilation air
Ÿ
around your gas grill housing.
Never disconnect the gas regulator or any gas
Ÿ
fitting while your grill is lit. A lit grill can ignite
leaking gas and cause a fire or explosion which
could result in property damage, personal injury
or death.
WARNING
Manual # P80151109C - Date:2010/04/30
Table of Contents
Primary Safety Warnings............................1-3
Pre-Assembly Instructions................................3
Part Diagrams and Lists............................4-13
Assembly Instructions.................................14-20
Use & Care Instructions:
• Gas Safety and Leak Tests..............21-23
• Natural Gas Connection............................24
• Lighting Instructions...................................25
• Troubleshooting...........................................26
Cleaning and Maintenance.......................27-28
Cooking Guide..........................................A1-A4
Frequently Asked Questions..................A5-A6
Repair Protection Agreements......Back Cover
!
•
This appliance, when installed, must be electrically grounded in accordance with local codes
or, in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the
Canadian Electrical Code, CSA C22.1.
•
Keep any electrical supply cord and the fuel
supply hose away from any heated surfaces.
!
If you smell gas:
1.
2.
3.
4.
WARNING
DANGER
!
!
Shut off gas to the appliance.
Extinguish any open flame.
Open lid.
If odor continues, keep away from
the appliance and immediately call
your gas supplier or your fire
department.
! !
1.
Do not store or use gasoline or other
WARNING
flammable liquids or vapors in the
vicinity of this or any other appliances.
An LP cylinder not connected for
2.
use shall not be stored in the vicinity
of this or any other appliance.
! !
LPG models must be used with Liquid Propane
•
Gas and the regulator assembly supplied. Natural
Gas models must be used with Natural Gas only.
Any attempt to convert the grill from one fuel type
to another is extremely hazardous and will void the
warranty.
Keep gas regulator hose away from hot grill surfaces
•
and dripping grease. Avoid unnecessary twisting of
hose. Visually inspect hose prior to each use for cuts,
cracks, excessive wear or other damage. If the hose
appears damaged do not use the gas grill. Call 1877-934-7455 for a certified replacement hose.
California Proposition 65
•
Combustion byproducts produced when using this
product contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive
harm.
Brass components on the grill, such as hose fittings,
propane cylinder valves (sold separately) and burner
valve stems, contain lead which is known to the State of
California to cause cancer, birth defects, or other reproductive harm.
Never use charcoal or lighter fluid in this gas grill.
•
Failure to comply with these instructions could result in
a grease fire or explosion that could cause serious
bodily injury, death or property damage.
WARNING
The Grease Tray must be visually inspected before each
•
grill use. Remove any grease and wash Grease Tray
with a mild soap and warm water solution. Failure to
comply with these instructions could result in a grease
fire or explosion that could cause serious bodily injury,
death or property damage.
2
Pre-Assembly Instructions For Your Safety
! !
Failure to comply with these instructions may result
in a hazardous situation which, if not avoided, may
result in injury.
Spiders and small insects can spin webs and nest
in the grill Burner Tubes during transit and warehousing which can lead to a gas flow obstruction
resulting in a fire in and around the Burner Tubes.
This type of "FLASHBACK FIRE" can cause serious
grill damage and create an unsafe operating condition for the user.
To reduce the chance of FLASHBACK FIRE
you must clean the Burner Tubes as follows
before initial use. Also do this at least once a
month in summer and fall or whenever spiders are
active in your area, and if your grill has not been
used for an extended period of time.
CAUTION
PRE-ASSEMBLY
Read and perform the following pre-assembly instructions:
Tools Required for Assembly:
protective work gloves
•
protective eyewear
•
Phillips Head Screwdriver
•
You will need assistance from 2 people to handle the
grill head and other large, heavy parts.
Open lid of shipping carton. Remove top sheet of
cardboard and packing materials. Lay cardboard sheet
on floor and use as a work surface to protect floor and
grill parts from scratches.
You may slice the carton front corners with a utility knife
to lay open the carton front panel. This allows you to
raise the Lid and remove the components packed inside, making it easier to lift.
Remove the screws from the rear of each Main Burner
1.
using a Phillips Head Screwdriver.
Carefully lift each Burner up and away from the Gas
2.
Valve Orifice.
Check and clean Burner/Venturi Tubes for insects and
3.
insect nests. A clogged tube can lead to a fire beneath
the grill.
Refer to the figure below and perform one of these
4.
3 cleaning methods:
METHOD 1: Bend a stiff wire or wire coat hanger
into a small hook as shown and run the hook
through the Burner Tube and inside the Burner
several times to remove debris.
TO CLEAN BURNER TUBE,
INSERT HOOK
HERE
9
METHOD 2: Use a bottle brush with a flexible handle
and run the brush through the Burner Tube and
inside the Burner several times to remove any
debris.
Burner Port
Burner Tube
Foot
Use the Hardware and Part Diagrams to ensure all items
are included and free of damage.
Do not throw away the bags of hardware that are included with boxed parts. These are required for assembly.
Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you
unpack the shipping box or you have questions during
the assembly process call 1-877-934-7455 M-F 8AM4:30PM CST for assistance.
Grill Installation Codes
The installation must conform with local codes or, in the
absence of local codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural Gas and Propane.
Installation Code, CSA B149.1, or Propane Storage and
Handling Code, B149.2.
WARNING: Grease can get very hot. Always handle the Grease
Tray with a flame retardant BBQ mitt. Before removing the
Tray, always be sure that the grill has properly cooled. Be
aware that the tray does contain grease and be extremely
careful when removing the tray to prevent spillage. Failure to
follow these instructions could cause serious bodily injury or
property damage.
METHOD 3: Use an air hose to force air through
each Burner Tube. The forced air should pass
debris or obstructions through the Burner and out
the Ports.
For safe operation ensure the Gas Valve Assembly
Orifice is inside the Burner Tube before using your
grill. See figure. If the Orifice is not inside the Burner
Tube, lighting the Burner may cause explosion and/
or fire resulting in serious bodily injury and/or
property damage.
Gas Valve Assembly
Orifice
Burner Tube
3
Hardware Parts List for Model B2610ALP
PART #
PART DESCRIPTION
QTY
PURPOSE OF PART
P06030025A
Hardware Pack
1
For use in assembly of B2610ALP
S182G0306A
Pan Head Screw 3/16"x3/8"
8
S112G0406A
Phillips Head Screw 1/4"x3/8"
8
S142G0306A
Countersink Flat Head Screw 3/16"x3/8"
4
Install Door Lower Hinges
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
Install Cart Side Panels onto Cart Bottom Shelf
S112G0406A
Phillips Head Screw 1/4"x3/8"
16
Install Casters
S112G0449A
Phillips Head Screw 1/4"x2-3/16"
2
S313G0406A
Nylon Lock Nut 1/4”
2
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
2
Install the Door Guide Plate onto the Cart Bottom Shelf
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
P00217002I
Door Handle Bracket
4
S112G0314A
Phillips Head Screw 3/16"x7/8"
4
S112G0419A
Phillips Head Screw 1/4"x1-3/16"
4
Install the Bowl to the Cart
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
P05536001Q
Hose Holder/Grill
2
S112G03061
Phillips Head Screw 3/16"x3/8"
3
S313G03061
Flange Nut 3/16"
3
S411G03068
Plain Washer 3/16”
3
S112G04061
Phillips Head Screw 1/4"x3/8"
8
S112G0306A
Phillips Head Screw 3/16"x3/8"
8
S411G0306F
Plain Washer 3/16”
8
S233G0408A
Wing Bolt 1/4"x1/2"
1
Install B Ring to the Tank Holder
Install the Door Upper Hinge Brackets onto the
Cart Panel Front
Already installed in Tank Holder Assembly
Install Caster Seats
Install Weight onto Cart Bottom Shelf
Install the Tank Holder Brackets to Cart Bottom Shelf
Install the Cart Front Bracket to Cart Side Panels
Install the Cart Panel Rear to Cart Side Panels
Install the Door Handle Brackets onto the Doors
Install the Hose Holders
Install the Grease Tray
Phillips Head Screw
3/16"x3/8"
Qty. 34
Part # S112G0306A
Phillips Head Screw
1/4"x2-3/16"
Qty. 2
Part # S112G0449A
Plain Washer 3/16”
Qty. 3
Part # S411G03068
Install the Side Shelves
Hardware Diagram for Model B2610ALP
Flange Nut 3/16"
Qty. 20
Part # S313G0306A
Nylon Lock Nut
1/4”
Qty. 2
Part # S313G0406A
Phillips Head Screw
3/16"x3/8"
Qty. 3
Part # S112G03061
Phillips Head Screw
1/4"x3/8"
Qty. 24
Part # S112G0406A
Phillips Head Screw
1/4"x1-3/16"
Qty. 4
Part # S112G0419A
Flange Nut 3/16"
Qty. 3
Part # S313G03061
Pan Head Screw
3/16"x3/8"
Qty. 8
Part # S182G0306A
Phillips Head Screw
3/16"x7/8"
Qty. 4
Part # S112G0314A
Countersink Flat Head
Screw 3/16"x3/8"
Qty. 4
Part # S142G0306A
Hose Holder/Grill
Qty. 2
Part # P05536001Q
For Installing the Tank Holder
Assembly (Already installed in
Tank Holder Assembly)
Plain Washer 3/16”
Qty. 8
Part # S411G0306F
Phillips Head Screw
1/4"x3/8"
Qty. 8
Part # S112G04061
Door Handle Bracket
Qty. 4
Part # P00217002I
4
Wing Bolt 1/4"x1/2"
Qty. 1
Part # S233G0408A
*One Battery/AA included in the Hardware Pack
Hardware Parts List for Model B3210ALP
PART #
PART DESCRIPTION
QTY
PURPOSE OF PART
P06030023A
Hardware Pack
1
For use in assembly of B3210ALP
S182G0306A
Pan Head Screw 3/16"x3/8"
S112G0406A
Phillips Head Screw 1/4"x3/8"
S142G0306A
Countersink Flat Head Screw 3/16"x3/8"
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S112G0406A
Phillips Head Screw 1/4"x3/8"
16
Install Casters
S112G0449A
Phillips Head Screw 1/4"x2-3/16"
2
S313G0406A
Nylon Lock Nut 1/4”
2
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
2
Install the Door Guide Plate onto the Cart Bottom Shelf
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
P00217002I
Door Handle Bracket
4
S112G0314A
Phillips Head Screw 3/16"x7/8"
4
S112G0419A
Phillips Head Screw 1/4"x1-3/16"
4
Install the Bowl to the Cart
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
P05536001Q
Hose Holder/Grill
2
S112G0306A
Phillips Head Screw 3/16"x3/8"
7
Install Cart Partition Panel
S112G03061
Phillips Head Screw 3/16"x3/8"
4
S313G03061
Flange Nut 3/16"
4
S411G03068
Plain Washer 3/16”
4
S112G04061
Phillips Head Screw 1/4"x3/8"
8
S112G0306A
Phillips Head Screw 3/16"x3/8"
8
S411G0306F
Plain Washer 3/16”
8
S233G0408A
Wing Bolt 1/4"x1/2"
1
Install B Ring to the Tank Holder
Already installed in Tank Holder Assembly
Install the Door Upper Hinge Brackets onto the Cart
8
Install Caster Seats
8
4 Install Door Lower Hinges
Install Cart Side Panels onto Cart Bottom Shelf
Install Weight onto Cart Bottom Shelf
Install the Tank Holder Brackets to Cart Bottom Shelf
Install the Cart Front Bracket to Cart Side Panels
Install the Cart Panel Rear to Cart Side Panels
Panel Front
Install the Door Handle Brackets onto the Doors
Install the Hose Holders
Phillips Head Screw
3/16"x3/8"
Qty. 41
Part # S112G0306A
Phillips Head Screw
1/4"x2-3/16"
Qty. 2
Part # S112G0449A
Plain Washer 3/16”
Qty. 4
Part # S411G03068
Install the Grease Tray
Install the Side Shelves
Hardware Diagram for Model B3210ALP
Flange Nut 3/16"
Qty. 20
Part # S313G0306A
Nylon Lock Nut
1/4”
Qty. 2
Part # S313G0406A
Phillips Head Screw
3/16"x3/8"
Qty. 4
Part # S112G03061
Phillips Head Screw
1/4"x3/8"
Qty. 24
Part # S112G0406A
Phillips Head Screw
1/4"x1-3/16"
Qty. 4
Part # S112G0419A
Flange Nut 3/16"
Qty. 4
Part # S313G03061
Pan Head Screw 3/16"x3/8"
Qty. 8
Part # S182G0306A
Phillips Head Screw
3/16"x7/8"
Qty. 4
Part # S112G0314A
Countersink Flat
Head Screw
3/16"x3/8"
Qty. 4
Part # S142G0306A
Hose Holder/Grill
Qty. 2
Part # P05536001Q
For Installing the Tank Holder
Assembly (Already installed in
Tank Holder Assembly)
Plain Washer 3/16”
Qty. 8
Part # S411G0306F
Phillips Head Screw
1/4"x3/8"
Qty. 8
Part # S112G04061
Door Handle Bracket
Qty. 4
Part # P00217002I
5
Wing Bolt 1/4"x1/2"
Qty. 1
Part # S233G0408A
*One Battery/AA included in the Hardware Pack
Hardware Parts List for Model B2610ANG
PART #
PART DESCRIPTION
QTY
PURPOSE OF PART
P06030026A
Hardware Pack
1
For use in assembly of B2610ANG
S182G0306A
Pan Head Screw 3/16"x3/8"
S112G0406A
Phillips Head Screw 1/4"x3/8"
S142G0306A
Countersink Flat Head Screw 3/16"x3/8"
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S112G0406A
Phillips Head Screw 1/4"x3/8"
16
Install Casters
S112G0449A
Phillips Head Screw 1/4"x2-3/16"
2
S313G0406A
Nylon Lock Nut 1/4”
2
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
2
Install the Door Guide Plate onto the Cart Bottom Shelf
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
P00217002I
Door Handle Bracket
4
S112G0314A
Phillips Head Screw 3/16"x7/8"
4
S112G0419A
Phillips Head Screw 1/4"x1-3/16"
4
Install the Bowl to the Cart
S112G0304A
Phillips Head Screw 3/16"x1/4"
2
Install the NG Regulator
S112G0306A
Phillips Head Screw 3/16"x3/8"
7
Install Cart Partition Panel
S112G0306A
Phillips Head Screw 3/16"x3/8"
2
S313G0306A
Flange Nut 3/16"
2
P05536001Q
Hose Holder/Grill
1
S112G03061
Phillips Head Screw 3/16"x3/8"
3
S313G03061
Flange Nut 3/16"
3
S411G03068
Plain Washer 3/16”
3
S112G04061
Phillips Head Screw 1/4"x3/8"
8
S112G0306A
Phillips Head Screw 3/16"x3/8"
8
S411G0306F
Plain Washer 3/16”
8
Install the Door Upper Hinge Brackets onto the Cart
8
Install Caster Seats
8
4 Install Door Lower Hinges
Install Cart Side Panels onto Cart Bottom Shelf
Install Weight onto Cart Bottom Shelf
Install the Cart Front Bracket to Cart Side Panels
Install the Cart Panel Rear to Cart Side Panels
Panel Front
Install the Door Handle Brackets onto the Doors
Install the Hose Holder
Phillips Head Screw
3/16"x3/8"
Qty. 35
Part # S112G0306A
Phillips Head Screw
1/4"x2-3/16"
Qty. 2
Part # S112G0449A
Phillips Head Screw
3/16"x7/8"
Qty. 4
Part # S112G0314A
Install the Grease Tray
Install the Side Shelves
Hardware Diagram for Model B2610ANG
Flange Nut 3/16"
Qty. 14
Part # S313G0306A
Nylon Lock Nut
1/4”
Qty. 2
Part # S313G0406A
Plain Washer 3/16”
Qty. 3
Part # S411G03068
Phillips Head Screw
1/4"x3/8"
Qty. 24
Part # S112G0406A
Phillips Head Screw
1/4"x1-3/16"
Qty. 4
Part # S112G0419A
Phillips Head Screw
3/16"x3/8"
Qty. 3
Part # S112G03061
Pan Head Screw
3/16"x3/8"
Qty. 8
Part # S182G0306A
Phillips Head Screw
3/16"x1/4"
Qty. 2
Part # S112G0304A
Flange Nut 3/16"
Qty. 3
Part # S313G03061
Countersink Flat
Head Screw
3/16"x3/8"
Qty. 4
Part # S142G0306A
Hose Holder/Grill
Qty. 1
Part # P05536001Q
Phillips Head Screw
1/4"x3/8"
Qty. 8
Part # S112G04061
Plain Washer 3/16”
Qty. 8
Part # S411G0306F
6
Door Handle Bracket
Qty. 4
Part # P00217002I
*One Battery/AA included in the Hardware Pack
Hardware Parts List for Model B3210ANG
PART #
PART DESCRIPTION
QTY
PURPOSE OF PART
P06030024A
Hardware Pack
1
For use in assembly of B3210ANG
S182G0306A
Pan Head Screw 3/16"x3/8"
S112G0406A
Phillips Head Screw 1/4"x3/8"
S142G0306A
Countersink Flat Head Screw 3/16"x3/8"
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S112G0406A
Phillips Head Screw 1/4"x3/8"
16
Install Casters
S112G0449A
Phillips Head Screw 1/4"x2-3/16"
2
S313G0406A
Nylon Lock Nut 1/4”
2
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
S112G0306A
Phillips Head Screw 3/16"x3/8"
2
Install the Door Guide Plate onto the Cart Bottom Shelf
S112G0306A
Phillips Head Screw 3/16"x3/8"
4
S313G0306A
Flange Nut 3/16"
4
P00217002I
Door Handle Bracket
4
S112G0314A
Phillips Head Screw 3/16"x7/8"
4
S112G0419A
Phillips Head Screw 1/4"x1-3/16"
4
Install the Bowl to the Cart
S112G0304A
Phillips Head Screw 3/16"x1/4"
2
Install the NG Regulator
S112G0306A
Phillips Head Screw 3/16"x3/8"
7
Install Cart Partition Panel
S112G0306A
Phillips Head Screw 3/16"x3/8"
2
S313G0306A
Flange Nut 3/16"
2
P05536001Q
Hose Holder/Grill
1
S112G03061
Phillips Head Screw 3/16"x3/8"
4
S313G03061
Flange Nut 3/16"
4
S411G03068
Plain Washer 3/16”
4
S112G04061
Phillips Head Screw 1/4"x3/8"
8
S112G0306A
Phillips Head Screw 3/16"x3/8"
8
S411G0306F
Plain Washer 3/16”
8
Install the Door Upper Hinge Brackets onto the Cart
8
Install Caster Seats
8
4 Install Door Lower Hinges
Install Cart Side Panels onto Cart Bottom Shelf
Install Weight onto Cart Bottom Shelf
Install the Cart Front Bracket to Cart Side Panels
Install the Cart Panel Rear to Cart Side Panels
Panel Front
Install the Door Handle Brackets onto the Doors
Install the Hose Holder
Phillips Head Screw
3/16"x3/8"
Qty. 35
Part # S112G0306A
Phillips Head Screw
1/4"x2-3/16"
Qty. 2
Part # S112G0449A
Phillips Head Screw
3/16"x7/8"
Qty. 4
Part # S112G0314A
Install the GreaseTray
Install the Side Shelves
Hardware Diagram for Model B3210ANG
Flange Nut 3/16"
Qty. 14
Part # S313G0306A
Nylon Lock Nut
1/4”
Qty. 2
Part # S313G0406A
Plain Washer 3/16”
Qty. 4
Part # S411G03068
Phillips Head Screw
1/4"x3/8"
Qty. 24
Part # S112G0406A
Phillips Head Screw
1/4"x1-3/16"
Qty. 4
Part # S112G0419A
Flange Nut 3/16"
Qty. 4
Part # S313G03061
Pan Head Screw
3/16"x3/8"
Qty. 8
Part # S182G0306A
Phillips Head Screw
3/16"x1/4"
Qty. 2
Part # S112G0304A
Phillips Head Screw
3/16"x3/8"
Qty. 4
Part # S112G03061
Countersink Flat
Head Screw
3/16"x3/8"
Qty. 4
Part # S142G0306A
Hose Holder/Grill
Qty. 1
Part # P05536001Q
Phillips Head Screw
1/4"x3/8"
Qty. 8
Part # S112G04061
Plain Washer 3/16”
Qty. 8
Part # S411G0306F
7
Door Handle Bracket
Qty. 4
Part # P00217002I
*One Battery/AA included in the Hardware Pack
Parts Diagram for Models B2610ALP/NG
1
2
4
47
45
44
40
17
43
18
19
54b
39
21
48
20
38
37
16
32
14
34
55
15
51
36
49
54a
13
50
28
12
27
26
56
25
46
31
6
9
7
5
8
42
11
19
20
33
17
41
23
24
30
53
3
66
64
65
62
57
58
67
22
52
68
59
29
70
35
72
71
71
61
70
10
63
60
74
75
73
69
8
Parts List for Models B2610ALP/NG
KEY DESCRIPTION PART# QTY
1 Lid Assembly P001462764
2 Temperature Gauge P00601071A
3 Lid Hinge P055010204
4 Lid Handle Bracket, Left P03303124A
5 Lid Handle Bracket, Right P03303125A
6 Lid Handle Heat Insulating Spacer P06802007J
7 Lid Handle P00218001R
8 Protective Pad P055180021I
9 Cooking Rack/Secondary P01505009E
10 Tank Holder Bracket, Left (LPG) P03304055J
11 Cooking Grid, 13"
12 Burner/Main P02003003B
13
14
15
16 Burner Bracket Assembly P02209215D
17 Side Shelf P011050424
18 Side Shelf Bracket, Left P033110434
19 Side Shelf Lock P055010175
20 Bowl Grease Shield P06902018A
21 Lighting Tube P05507012A
22 Door Hinge, Left/Lower P03302037J
23 Cart Wind Shield, Rear P06906079E
24 Bowl Rear Panel, Upper P02011073E
25 Bowl Rear Panel P0075809KA
26 Grease Heat Shield, Upper P06904051A
27
28
29
30
31 Gas Collector Box with Electrode P026090154
32 Electrode Wire Set P02615175A
33 Side Shelf Bracket, Right P033110444
34
35
36
37 Extension Fitting for Manifold P03902029A
38
39 Extension Tube P03720003A
40 Control Panel Heat Shield P06919003B
41 Cart Partision Panel, Right (NG) P07512014D
42 Cart Partision Panel Bracket, Right (NG) P03303110J
43 Control Panel, Upper P02913441I
44 Control Panel, Lower P02913456I
45 Control Knob Seat P03413033J
46 Hose, 12 ft (NG) P03704001A 1
47 Control Knob/Main Burner P03419633L
48 Electric Ignitor, 4 - Port P02502244C
49 Electric Ignitor Protector P03328048Q
50 Regulator with Hose Assembly (NG) P03614007A
Flame Tamer/Ceramic, Rear
Flame Tamer/Ceramic, Front
Flame Tamer Rack
Bowl Front Panel P0073888KA
Bowl Panel, Left
Door Hinge, Right/Lower
Bowl Panel, Right
Hose Holder/Grill (LPG) P05536001Q
Hose Holder/Grill (NG) P05536001Q
Cart Bottom Shelf (NG)
Gas Valve/Manifold Extension
Gas Valve/Manifold Assembly (LPG) Y0060736
Gas Valve/Manifold Assembly (NG) Y0060738
P01615009H 2
P01804015A
P01804014A
P01720038F
P0076102KA
P03302038J
P0076202KA
P01001082K
P05005392G
1
1
2
1
1
2
1
4
1
1
4
4
4
1
1
2
1
4
2
1
1
1
1
1
1
1
1
1
1
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
1
9
Parts List for Models B2610ALP/NG
KEY DESCRIPTION PART# QTY
51 Regulator with Hose (LPG) P03601040A 1
52 Door Assembly, Right P04303051D 1
53 Lighting Stick P05313025B 1
54a Grease Tray P02706404A 1
54b Grease Tray Handle P0272008H4 1
55 Bowl Bracket, Left P01301014D 1
56 Cart Bracket, Front P03305074J 1
57 Door Hinge Bracket, Upper Left P03302014J 1
58 Cart Side Panel, Left P07617048E 1
59 Door Magnet P05523004K 4
60 Cart Panel/Rear P07702119E 1
61 Weight P05344003Q 1
62 Door Handle Insulating Spacer P06801023G 4
63 Tank Holder Bracket, Right (LPG) P03304056J 1
64 Door Assembly, Left P04302051D 1
65 Door Handle Bracket P00217002I 4
66 Door Handle P00218003R 2
67 Cart Bottom Shelf (LPG) P01001081K 1
68 Door Guide Plate P05510024Q 1
69 Tank Holder Assembly (LPG) P05358003L 1
70 Caster Seat, Left Front/Right Rear P03305079J 2
71 Caster Seat, Right Front/Left Rear P03305078J 2
72 Caster, 2.5" with Brake P05110006D 4
73 Door Hinge Bracket, Upper Right P03302015J 1
74 Bowl Bracket, Right P01302014D 1
75 Cart Side Panel, Right P07618049E 1
Hardware Pack (LPG) P06030025A 1
Hardware Pack (NG) P06030026A 1
Operator's Manual P80151109B 1
10
Parts Diagram for Models B3210ALP/NG
1
2
4
47
45
44
40
17
43
18
19
39
38
48
21
20
37
16
14
53
15
32
49
36
13
12
28
51
34
27
26
10
25
50
46
6
9
7
5
8
11
23
24
30
31
33
20
19
41
3
17
54b
66
65
64
62
57
55
58
54a
67
52
22
11
68
56
59
29
70
42
35
72
71
71
76
63
70
60
61
74
75
73
69
Loading...