Granberg Diagonal lift 504-055, Diagonal lift 504-115 Instruction Manual
Diagonal lift Diago 504
Doc. No: M504
Edition: 10
Date: 2017-06-19
INSTRUCTION MANUAL
Diagonal lift 504
English
For mer information, see:
www.granberg.se
Section: Headline: Page:
1. Introduction ...................................................................................................................................................4
2. Declaration of Conformity ........................................................................................................................4
3. Intended use - Technical data
................................................................................................................
4
Installation instructions:
4.1 Mechanical construction
.......................................................................................................................
5
4.2 Delivery modules
........................................................................................................................................
5
4.3 Pre-assembly of the lift mechanism
....................................................................................................
6
4.4 Joist heights
..................................................................................................................................................
7
4.5 Location wall socket and control devices ..........................................................................................8
4.6 Location wall socket for lighting ...........................................................................................................9
4.7 To consider before installation ..............................................................................................................9
4.8 Installation on a wall
............................................................................................................................... 10
4.9 Adjustments to get the lift vertical
....................................................................................................
10
4.10 Installation of cabinet on lift mechanism
........................................................................................
11
4.11 Installation of light ramp (accessory)
................................................................................................. 1
2
4.12 Installation, connection of trip plate ................................................................................................. 12
4.13 Installation of lighting under the safety panel (accessory) ........................................................ 12
4.14
Functional test
..............................................................................................................................................
12
Operator’s information:
5.1 Safe use
..........................................................................................................................................................
13
5.2 Safety arrangements
.................................................................................................................................
14
5.3 Load distribution and side forces
.........................................................................................................
14
5.4 Actions after use ........................................................................................................................................ 14
5.5 Alternative control devices
....................................................................................................................
15
5.6 Cleaning ....................................................................................................................................................... 15
5.7 Maintenance ............................................................................................................................................... 16
6. Instructions for Recycling ...................................................................................................................... 16
7. Decals ............................................................................................................................................................ 16
8. Warranty ....................................................................................................................................................... 17
9. Service & maintenance records
...........................................................................................................
17
10. Fault finding................................................................................................................................................ 18
11. Spare parts list ............................................................................................................................................ 18
12. El. system / Electric circuit diagram .................................................................................................... 19
13. CE-Declaration of Conformity
...............................................................................................................
19
Content
4
2. Declaration of Conformity with EU-directives
This product is CE-marked and is granted to conform to the basic safety and operation requirements, in accordance with de
actual Machinery, EMC- and Low voltage Directives. A separate ”CE-Declaration of Conformity” is available in
section 13.
3. Intended use - Technical data
The wall cabinet lift series 504 is intended to achieve a convenient location to put or pick of normal kitchen cabinet items,
e.g. dry groceries and household objects, by means of manoeuvring the shelf system along an arc-shaped path down to the
worktop level below it. The operation shall be indoors, under normal housing conditions regarding temperature, humidity and
lighting.
The Diagonal lift is not intended for use in moist environments.
It is assumed that the wall cabinet is made according the standards EN 1116 and EN 1153.
Technical data, Diagonal Lift 504
Model 504-055
(600 - 1100 mm cabinet width)
504-115
(1200 - 1800 mm cabinet width)
Cabinet width 600 - 1100 mm 1200 - 1800 mm
Cabinet height 700 - 1100 mm 700 - 1100 mm
Cabinet depth, max 400 mm 400 mm
Vertical stroke, max 435 mm 435 mm
Horizontal stroke, max 147 mm 147 mm
Time for a lift or lowering stroke, approx. 26 s 26 s
Mains voltage 230 V / 120 V* 230 V / 120 V*
Power consumption 345 W / 324 W* 345 W / 324 W*
Max number of full work cycles/ hour 6 6
Control and lighting voltage 24 V DC 24 V DC
Weight excl. cabinet 22 kg 31 kg
Weight incl cabinet, maximum size 66 kg 115 kg
Max load in the cabinet 95 kg 50 kg
Noise pressure less than 70 db(A) 70 db(A)
1. Introduction
We have the pleasure to deliver a Granberg Interior wall cabinet lift series Diago 504. This is an electrically operated lifting and
lowering system for installation of new or existing wall cabinets. It can be used separately, or together with the Granberg work
top units, and it becomes then a total adaptation of the kitchen. The lift is suitable for all wall cabinets of various makes, which
are made according the standards EN 1116 and EN 1153.
Only authorized persons may use the 504 wall cabinet lift!
Authorization means obligation to read and follow the instructions.
It is very important that you read and understands the instructions before you use the device.
If you have any questions - contact your supplier.
This Instruction manual shall be available for all concerned persons, be kept in a protected place and shall follow the product,
if it is moved to another installation site or another house or apartment owner.
Correct use, operation, inspections and maintenance are
decisive for efficient and safe work.
* The voltage depends on which model that is delivered
5
4.1 Mechanical construction
The diagonal lift Diago 504 comprises a wall frame, to be installed on a wall, a cabinet
frame onto which one or more cabinets are installed, and four link arms that operate
in parallel. The arc-shaped lift and lowering path is achieved by an electrically powered screw jack, which operates between the wall and cabinet frames.
4.2 Delivery modules
The diagonal lift is delivered in boxes. The components shall be assembled in accordance with the assembly instructions.
The packaging material shall be handed over to an organized material re-cycling organisation.
Top and bottom plates with attachment details. The plastic
retainers and strips shall be used for fastening the electric cables,
once the lift installation work is finished.
Lift mechanism without top and bottom
plates.
Trip panel with attachment details.
Control box (The box on the picture is
used for outside installation).
Lighting and transformer with
attachment details. (Accessory)
Top plate
Bottom plate
6
C
A
B
G
E
D
K
E
4.3 Pre-assembly of the lift mechanism
4.3.1 Install the bottom plate (A) onto which
the cabinet shall be mounted. The plate is hung
on the frame, and then locked with the M5x45
screws (B).
(Do not forget the washer).
NOTE!
It is very important that the locking screws (B) are
installed
4.3.2 Install the top plate (D) on the height adjustable
side profiles (E) with the cabinet support
downwards.
4.3.3 Lock with the hexagonal screws (K).
4.3.4 Put in the cover plugs (G).
The top plate shall later on be fastened in the
top plate of the cabinet.
The locking screw (C) must not be too hard tighten. The
bottom plate must be able to move without jamming.
The picture shows the Diagonal lift 504
ready for installation on a wall.
Picture 1
Picture 2
Picture 3
Loading...