4
3. Intended use - Technical data
The Wardrobe lift 717 is intended to vertically lift and lower clothes on the clothes-rail to and from the wardrobe. The operation shall be indoors under normal housing conditions regarding temperature, humidity and lighting.
The Wardrobe lift must not be used in humid rooms.
Model: 717-06063 717-08063
Cabinet width, inside 560 - 668 mm 760 - 1168 mm
Cabinet height, inside Adjusted for the length of the clothes Adjusted for the length of the clothes
Cabinet depth, inside Adjusted for the width of the clothes Adjusted for the width of the clothes
Vertical stroke, max 820 mm 820 mm
Horizontal stroke, max 820 mm 820 mm
Machine height, vertical arm 840 mm 840 mm
Machine height, lowered arm 1000 mm 1000 mm
Time for a lift or lowering stroke, approx 14 sec 14 sec
Mains supply* 120 V 6 A / 230 V 2,5 A 120 V 6 A / 230 V 2,5 A
El. protection class IP 20 IP 20
Power consumption 575 W 575 W
Max no. of full work cycles per hour 6 6
Control voltage 24 V DC 24 V DC
Weight 15 kg 15 kg
Max load on the clothes-rail 20 kg 20 kg
The noise pressure is less than 70 db(A) 70 db(A)
Technical data, Wardrobe lift 717:
1. Introduction
We have the pleasure to deliver a Granberg Interior Wardrobe lift 717, an electrically operated lifting and lowering system for
installation in new or existing wardrobes.
The Wardrobe lift has got a clothes-rail, where clothes can be hung. With the push button box the motorized clothes-rail is
lowered to a convenient height for handling the clothes.
The lift has adjustable width and there are two models.
Only authorized persons may use the Wardrobe lift!
Authorization means obligation to read and follow the instructions.
It is very important that you read and understands the instructions before you use the device.
If you have any questions - contact your supplier.
This Instruction manual shall be available for all concerned persons, be kept in a protected place and shall follow the product, if
it is moved to another installation site or another house or apartment owner.
Correct use, operation, inspections and maintenance are
decisive for efficient and safe work.
2. Declaration of Conformity with EU-directives
This product is CE-marked and is granted to conform to the basic safety and operation requirements, in accordance with de
actual Machinery, EMC- and Low voltage Directives. A separate “CE-Declaration of Conformity” is available in
section 13.
* The voltage depends on which model that is delivered.