Gram Precision C6-3T, C6-10T, C6-5T, C6-15T, C6-20T Operation Manual

SERIES

C6

3T / 5T / 10T / 15T / 20T

OPERATION MANUAL

2

INDEX English

Main specification 3

Analog 3

Display 3

Ambient Environment 3

Front and back view of the indicator 4

Keys function 4

Operation 5

Turning on 5

Zero function 5

Tare 5

Manual accumulation 5

Check accumulation 6

Clear accumulation 6

Parameters setup 6

Calibration 8

Error indication 9

Rechargeable lithium battery 10

Maintenance 10

Guarantee 12

3

ENGLISH

MAIN SPECIFICATION

Analog

Accuracy: n=3000
Input Signal: 1.5~3mv/V
Converting Speed: 10 times/second

Display

Display: 0~999999

5 digits LCD/LED, 7 indicators

Division Value: 1/2/5/10/20/50 (optional)

Ambient Environment

Distance between scale and indicator: 150m
Power Supply: DC: 3.7V
Ambient Temperature: 0~40 ºC
Storing Temperature: -25 ºC ~55 ºC
Ambient Moisture: ≤ 85% RH
Warm-up Time: 10~15 分钟

4

FRONT AND BACK VIEW OF THE INDICATOR

KEYS FUNCTION

In weighing status hold the key for more than 5s, it enters setup mode

(All the setting in this mode should be recorded with the calibration
header on; or the data will lose).

Tare function in weighing status.

Zero function in weighing status.

For selecting.

Weighing accumulation

Long press for 1sec to turn on. Long Press for 3sec to turn off.

5

OPERATION

Turning on

Turn on the power, the indicator performs self-checking and go into weighing mode.

Zero function

Press

for zero return, indicator returns to zero within the zero range 2%FS.

Please make sure the stabilization light is on when zero operation.

If obstruction occurs by more than 1 wireless indicator working at same time,
you can open both indicator and scale, change the number of transcoder
inside with same number and restart.

Tare

At weighing mode, press

to deduct displaying weight while it is positive

and stabilization light is on. At no-load status of the scale, press

to

deduct tare and then tare light is off.

Manual accumulation

At weighing mode, press , it displays “ADD-01”, “01” means times of
accumulation (the Max times is 99 and then it will return to 01). After then
it will display the value of accumulation for 3s and then back to normal
weighing mode by itself.