Graham Field TENDERFLO AQTF-2035 User Manual

Note: Before you fi ll your Tenderfl o product with water, read the following safety precautions:

Do not overfi ll. Overfi lling could cause excessive stress to the mattress and/or seam leakage. Fill the overlay or

Caution: Avoid puncture. Keep pins and other sharp instruments away from the Tenderfl o.

WARNING: Do not fi ll the Tenderfl o with hot water. It could cause personal injury and/or damage

the Tenderfl o. Use warm water, approximately 98 -99° F or 36-37°C, only.

WARNING: This product has a maximum weight capacity of: Item AQTF-2035: 225 lbs.

Item AQTF-3013: 250 lbs.

Place overlay on either a conventional or hospital mattress, with the fi ll valve facing up and visible at

Place cushion on a wheelchair.

Note: Do not fi ll Tenderfl o while patient is on surface.

®

WATER OVERLAY

®

II WATER CUSHION

your fi nger into the opening and pull the

valve to its raised position.

Tenderfl o’s male fi ll valve.

weight and bone structure.

Caution: If you accidentally overfi ll this Tenderfl o product, drain out the excess water immediately.

Caution: Ensure that fi ll valve cap is securely tightened. Crossed threads could result in leakage. Gently push

Position the patient on the overlay with heels at end of mattress and head on pillow.

Air bubbles can impair the softness of the Tenderfl o. To remove this trapped air:

To retain optimal heat, cover the Tenderfl o overlay with a blanket and plastic drawsheet.

Note:  is is a single-use product; do not reuse.

You may clean the Tenderfl o with any non-petroleum-based antibacterial cleaner. Do not autoclave.  e Tenderfl o