Graham Field LF1007, LF1009A User Manual

A Graham-Field Brand
Warning: This product should not be used without proper instruction from a healthcare professional.
Warning: Lumex assumes no responsibility for any damage or injury caused by improper installation, assembly or use of this product.
Warning: If components are damaged or missing, contact your dealer immediately. DO NOT use substitute parts.
Warning: Ensure that all lift and scale components are securely mounted as instructed in the Assembly Instructions for your specific lift and scale before use.
LF1007 / LF1009A: LIFT SCALE KIT OPERATION INSTRUCTIONS
LIFT SCALE SPECIFICATIONS
WEIGHT RANGE ................... 600 lb / 270 kg
DISPLAY RESOLUTION ....... 0.1 lb / 0.1 kg
ACCURACY ........................... 0.1% +/- Digit of reading
DISPLAY TYPE ...................... LCD
SIZE ....................................... 3” x 3” x 4”
WEIGHT ................................. 1 Pound
POWER SUPPLY ................... 9V Battery
BATTERY LIFE ...................... Approx. 3,000 readings
patient lift scale
The LUMEX Lift Scale is a compact precision scale system designed for use with approved lift designs employing compatible boom and hanger configurations.
Completely self-contained, the LUMEX Lift Scale combines the latest microprocessor and load cell technol­ogy to provide accurate and repeatable weight data with a calibrated accuracy of 0.1%.
One button Auto-Zero Electronics makes patient weighing quick and easy.
The LUMEX Lift Scale is powered by a single 9-Volt battery that will provide approximately 3,000 readings.
Installation
Refer to the Assembly Instructions provided with your scale, and attach the scale system as described.
LF1007 / LF1009A: Lift Scale Kit Operation Instructions ©Graham-Field Health Products, 11/03
1
OPERATING INSTRUCTIONS
Warning: For proper lifting procedure, follow instructions in Patient Lift Owner's Manual while operating scale.
Warning: Do not use patient lift / scale system to transport patient.
1. Press the ZERO button to set the scale system to Zero. “0” will pan
display
across the screen for several seconds; display will then read “0.0”.
2. Press the Kg/Lb button to choose the display mode (Kilograms or
Pounds).
3. Remove the sling/stretcher from the swivel bar.
4. Position the patient.
5. Re-attach the sling/stretcher to the swivel bar.
6. Carefully lift the patient.
7. When motion has stabilized, press the OPERATE button to display the
weight data. Do not touch the patient or sling/stretcher during this step.
Kg/Lb button
patient lift scale
operation buttons
Zero button
Operate button
Note: The scale system automatically goes to sleep after 60 seconds to
conserve the battery. To wake the system, press the OPERATE button.
8. When the weighing process is complete, lower the patient carefully.
9. Press the ZERO button to re-Zero the scale system, with sling attached and empty, before each weighing.
Battery Replacement
The Lift Scale is powered by one 9-Volt battery, which should provide approximately 3,000 readings (when using 9-Volt Lithium battery) before replacement is needed. When the battery needs replacement, an indicator will appear on the display. To replace the battery:
1. Open access door on back of scale.
2. Remove old battery from terminals.
3. Install new battery on terminals.
4. Close access door. Ensure that access door is securely closed before using scale.
Note: The battery load cell contains no user-serviceable components, and
should be serviced by qualified personnel only.
WARRANTY
One year limited warranty. For additional warranty information, please contact your Lumex dealer.
Graham-Field Health Products
Atlanta, Georgia 30360
printed in U.S.A.
battery access door
2
LF1007 / LF1009A: Lift Scale Kit Operation Instructions
Graham-Field Health Products, 11/03
Loading...