Graco Children s PD141481 User Manual

True Focus

Model 2V00

OWNER’S MANUAL

Keep Instructions For Future Reference

©2010 Graco PD141639A 5/10 US

Warnings to Parents and Other Users

Failure to follow these warnings and the assembly
instructions could result in serious injury or death.

This device is designed to aid in the monitoring of
your child. When using the monitor, you must still
provide the supervision necessary for the continued
safety of your child. This product is not designed or
intended for use as a medical monitor. Always be sure
that both the transmitter and receiver are working
properly and are within range of each other.

• STRANGULATION HAZARD. Keep the adapter

cords out of the reach of children. Do not use with
extension cords.

• DO NOT place the Nursery Unit or its cord within
your child’s reach. Do not put the Nursery Unit inside a
crib or playard.

• Use ONLY with 110-120 volt AC electrical outlets.

• Protect the AC adapter cords. Place them so they are
not walked on or pinched by furniture or other items.

• Allow for proper ventilation when units are in use.
Do not cover the Nursery Unit or Parent Units with any
object such as a blanket. Do not place it in a drawer or in
any location which would mufe the sound or interfere
with the normal ow of air.

• DO NOT immerse any part of the Nursery Unit or
Parent Units in water. Clean only with a dry cloth.

2

• DO NOT place unit near water and moisture. Do not
use the Nursery Unit outdoors. Do not use the Nursery
Unit near possible wet areas, such as a bathtub, shower,
wash basin, sink, laundry tub, swimming pool, wet
basement, etc.

• Keep Nursery Unit away from heat sources, such as
replaces, radiators, stoves, and TVs or other appliances.
Heat can damage the case or electrical parts.

• Do not use the Nursery Unit if:

• The adapter cords or plugs have been damaged.

• The unit has been exposed to liquids.

• Unit has been dropped or is damaged.

• DO NOT OPEN THE NURSERY UNIT, PARENT

UNIT, OR ADAPTERS. No user-serviceable parts

inside. Risk of electrical shock, re or death.

• The antenna used for this transmitter must be installed
to provide a separation distance of at least 20 cm (7.9”)
from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.

FCC Statement:

WARNING Modications not authorized by the
manufacturer may void users authority to operate this
device.

NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.

3

These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.

However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and
receiver.

• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.

• Consult the dealer or an experienced radio/TV
technician for help.

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,
and

(2) This device must accept any interference received,
including interference that may cause undesired
operation.

• Look for the FCC ID on the back of the Nursery Unit
and inside the battery compartment on the Parent Unit.

4

Parts List

Parent Unit

(PD141402)

Adult assembly required.

Tool required: Phillips screwdriver

(1) Parent Unit

Battery

(1) AC Adapter

Nursery Unit

(PD141481)

(1) AC Adapter

5

Parent Unit

DC Adapter
Jack

Belt Clip

Battery Compartment

Volume Up/Down

SoundLights

6

Zoom

In

Battery Status
Indicator

Signal Strength
Indicator

Navigation
buttons

Menu

Power Zoom Out

Installing Batteries

1

• The battery must be
plugged into the Parent Unit
before the unit will be ready
for use.
Use a Phillips head
screwdriver to remove the
battery door.
NOTE: Screw should be
loosened but stay attached to
battery door.

2

Remove the battery pack
from the packaging and plug
into the back of the unit.
Place the battery pack into
the recess and press the wire
into the slot on the side.

7

3

Replace the battery door.

Using AC Adapters

4

• The Parent Unit(s) uses a rechargeable battery pack

or standard 120 volt AC household current. To use
AC adapters, plug the connector on the cord into the
DC adapter jack on the side of the Parent Unit. Then
plug adapter into a standard wall outlet.

• Use ONLY the Graco adapters included with the

unit. Do not use these adapters with other equipment
under any circumstances.

• If units do not work, check that AC adapters are

plugged into working outlets.

8

Nursery Unit

Camera

Power

DC Adapter
Jack

Battery Compartment

9

Battery Installation

5

Use a Phillips head
screwdriver to remove the
battery door.
NOTE: Screw should be
loosened but stay attached
to battery door.

Insert

6

3-AA (1.5V-LR03)

batteries.
Make sure they are
inserted correctly.

• Batteries will power the Nursery Unit in the event of
a power outage. Only audio (no video) is operational
when running on battery power.

• Batteries should be replaced periodically.

10

7

Using AC Adapters

Replace the battery door.

8

● The Nursery Unit uses 3-AA
(1.5V-LR03) batteries or standard
120 volt AC household current.

● To use AC adapters, plug the
connector on the cord into the AC
adapter jack on the back of the
Nursery Unit. Then plug adapter
into a standard wall outlet.

● Use ONLY the Graco adapters included with the unit.
Do not use these adapters with other equipment under
any circumstances.

● If units do not work, check that AC adapters are
plugged into working outlets.

● When electricity is off (from a power failure, etc.), the
Nursery Unit will operate on 3-AA (1.5V-LR03)
batteries in audio mode only.

11