Graco Inc Ultra Max 33Z9257 User Manual

OPERATION – – –

3Z9257

ULTRArMAX
695/795/1095/1595/Mark V –

All models not available in all countries.

3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure

Related manuals

(695/795/1095)

(1595/Mark V )

309250. . . . . . .

309640. . . . . . .

AutoClean

309251. . . . . . .

309266. . . . . . .

309278. . . . . . .

309639. . . . . . .

Rev. B

B

245000

309252. . . . . . .

309260. . . . . . .

309267. . . . . . .

309263
309261

309268

(695)

(795/1095)
(1595/Mark V)

TI0765A

INSTRUCTIONS

READ ALL INSTRUCTIONS AND WARNINGS

BEFORE SETTING UP OR OPERATING THIS UNIT.

You need:

S two adjustable wrenches
S two 5 gallon (19 liters) metal pails
S compatible cleaning fluids

LatexOil Base

Clothing:

S respirator
S safety glasses

Power: grounded outlet

Japan: 100V, 15A
United Kingdom: 110V, 15A
North/Latin Am: 120V, 15A
Europe/South Am: 230V, 10A
Australia/Asia: 240V, 10A

S 12 AWG, (1.5 mm2) grounded

extension cord up to
300 feet (100 M)

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

Graco Inc. is registered to I.S. EN ISO 9001

WARNING

Fire and explosion hazard: Solvent and paint fumes can ignite or

explode.

To help prevent a fire and explosion:

DUse only in an extremely well ventilated area.
DEliminate all ignition sources; such as pilot lights, cigarettes and

plastic drop cloths (static arc hazard). Do not plug or unplug power
cords or turn lights on or off in spray area.

DGround Sprayer, object being sprayed, paint and solvent pails.
DHold gun firmly to side of grounded pail when triggering into pail.
DUse only conductive airless paint hose.
DDo not use 1,1,1-trichloroethane, methylene chloride, other

halogenated hydrocarbon solvents or fluids containing such
solvents in pressurized aluminum equipment. Such use could
result in a chemical reaction, with the possibility of explosion.

Fluid injection and high pressure hazard: High pressure spray or
leaks can inject fluid into the body.

To help prevent injection, always:

DEngage trigger safety latch when not spraying.
DKeep clear of nozzle and leaks.
DNever spray without a tip guard.
DDo PRESSURE RELIEF if you stop spraying or begin servicing

sprayer.

DDo not use components rated less than sprayer Maximum

Working Pressure.

DNever allow children to use this unit.

If high pressure fluid pierces your skin, the injury might look like
“just a cut”. But it is a serious wound! Get immediate medical attention.

2 3Z9257

CONTROLS / / /

CONTROLS / CONTROLES / COMMANDES / CONTROLES

Pressure Display /

On/Off Switch

15/20 Ampere Switch

/

/

Drain Valve /

/

AutoCleant 309278

Pressure Control /

/

Trigger Lock /

/

PRESSURE RELIEF / / /

Follow 1–5 when you stop
spraying.

3

12

4

Contractor IIContractor II

ContractorContractor

5

33Z9257

STARTUP / / /

Flush with warm, soapy
water.

Flush with mineral spirits.

1

WARNING

2

3

Flush / / /

WASTE

WARNING

FLUSH

5

10”

WASTE

46

7

FLUSH

9

20”

WASTE

FLUSH FLUSH

Prime / /

WARNING

WASTE

108 11

1’

10”

1513 1412

4 3Z9257

PAINT

Watch for paint.

Watch for paint.

SPRAY / / /

1234

WARNING

CLEAR CLOG / / /

1 23

WARNING

CHANGE PAINT / / /

1 3

2

AutoCleant 309278

Pressure Relief

or Flush

GROUNDING /

WARNING

1

Grounded Outlets Required

2

3

Prime

53Z9257

SHUTDOWN /

/ /

1

2

WARNING

AutoCleant

3

309278

Pressure Relief

6

7

or 3–22

8

9

Flush

11 12 13

4

FLUSH

5

10

20”

Pressure Relief

14

FLUSH

15 17

19

20 21

Pressure Relief

Mineral Spirits

1816

20”

WASTE

22

6 3Z9257

Mineral Spirits

DISPLAY /

ERROR CODES /

High pressure limit

Transducer fault /

High line voltage

High current

Motor overheated

> 2000 psi in
Timer Mode

Low line voltage

Turn power OFF/ON to reset

PRESSURE

Service manual

/

PRESSURE

GAL/LTR

TIMER

–

GAL/LTR

–

Service

TIMER

AutoCleant

309278

Noise

Power 91 dB(A)*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pressure 82 dB(A)*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

* ISO 3744

91 dB(A)*
82 dB(A)*

91 dB(A)*
82 dB(A)*

Graco Standard Warranty

Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from
defects in material and workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the
exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of
sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment
is installed, operated and maintained in accordance with Graco’s written recommendations.

This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or sub­stitution of non–Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.

This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and
transportation.

THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

73Z9257

Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the
date of sale.

GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD
BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches,

hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making
any claim for breach of these warranties.

In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,
breach of warranty, the negligence of Graco, or otherwise.

FOR GRACO CHINESE, JAPANESE AND KOREAN CUSTOMERS

The Parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English.

ADDITIONAL WARRANTY COVERAGE /

Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty
Program”.

TO PLACE AN ORDER OR FOR SERVICE, contact your Graco distributor,

or call 1–800–690–2894 to identify the nearest distributor.

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the

right to make changes at any time without notice.

Foreign Offices: Belgium, Korea, Hong Kong, Japan

Sales Offices: Minneapolis, Detroit

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

8 3Z9257

http://www.graco.com

PRINTED IN USA 309257 December 2000, revised 12/2002