Graco UltraClear 2755B1, UltraClear 2755, UltraClear 2755GM, UltraClear 2755B User Manual

Ultraclear™ Monitor

Owner’s Manual • Please save for future use.

Ultraclear™ Moniteur

Manuel d’utilisateur

Veuiller garder pour usage ultérieur.

Monitor Ultraclear™

Manual del propietario

Por favor, conservélo para utilizarlo en el futuro.

2755

Dear Customer, Graco is the recognized

leader in the design and manufacture of quality baby products. We believe your new Graco nursery monitor is a wise choice.

Before using your nursery monitor, please take a few minutes to read this Owner’s Manual. The short time you spend reading these instructions will help you use your nursery monitor properly.

Cher client, Graco est le chef de file

dans la conception et la fabrication de produits de qualité pour bébé. Nous croyons que le moniteur de nursery de Graco est un choix judicieux.

Avant d’utiliser votre moniteur de nursery, prenez quelques minutes pour lire le manuel d’utilisateur. Ce court instant que vous prendrez à lire les instructions vous aidera à utiliser correctement votre moniteur de nursery.

Estimado cliente, Graco es el líder reconocido

en el diseño y fabricación de productos infantiles de calidad. Creemos que su nuevo monitor de bebés Graco es una buena selección.

Antes de usar su nuevo monitor de bebés, tome unos minutos para leer este manual del propietario. Los pocos minutos que tome leyendo estas instrucciones le ayudarán a usar su monitor de bebés correctamente.

Product Features

Caractéristiques du produit

Características del producto

AC Adapter Jack

Channel

Selector*

Signal Indicator

Lights

ON/OFF/Volume

Antenne AntenaAntenna

Interrupteur arche/arrêt Encendido/ApagadoON/OFF

Voyant lumineux Luz de encendidoPower Light

Prise pour adaptateur CA

Sélecteur de fréquence* Selector de canal*

Affichage lumineux

Interrupteur marche/arrêt et contrôle de volume

Enchufe adaptador VCA

Luces del indicador de señal

Encendido/Apagado/ Volumen

*The Parent Unit and the Nursery Unit MUST be set to the same channel. If receiver detects sounds from another nursery monitor or cordless phone, set units to the other channel. If problem persists, contact Graco.

*L’unité des parents et celui de la nursery DOIVENT tous les deux être réglés à la même fréquence. Si le récepteur détecte des sons d'un autre moniteur de nursery ou de téléphones sans fil, placez les unités à une autre fréquence. Si le problème persiste, contactez Graco.

*Tanto la unidad de los padres como la unidad del bebé DEBE sintonizarse al mismo canal. Si el receptor detecta sonidos de otro monitor de bebés o un teléfono inalámbrico, sintonice ambas unidades al otro canal. Si el problema persiste, póngase en contacto con Graco.

Nursery Unit

Unité de la nursery

Unidad del bebé

Model 2755B Modèle 2755B

Modelo 2755B

Parent’s Unit (2 on certain models)

Unité des parents (2 sur certains modèles)

Unidad de los padres (2 en ciertos modelos)

AC Adapter (2, 3 on certain models)

Adaptateur CA (2, 3 sur certains modèles)

Adaptador VCA (2, 3 en ciertos modelos)

Replacement Parts • Warranty Information (USA)

Pièces de rechange • Renseignements sur la garantie (au Canada)

Información sobre la garantía y las piezas de repuesto (EE.UU.)

To purchase parts or accessories or for warranty information in the United States, please contact us at

the following:

Para comprar piezas o accesorios o para obtener información sobre la garantía en los Estados Unidos, por favor

comuníquese con nosotros en:

www.gracobaby.com

or/ó

1-800-345-4109

To purchase parts or accessories or for warranty

information in Canada, contact Elfe at:

Pour commander des pièces ou obtenir des

renseignements au sujet de la garantie au Canada,

communiquez avec Elfe au:

1-800-667-8184

(Montréal : 514-344-3533 / Fax: 514-344-9296).

or/ou

www.elfe.net

Product Registration (USA)

Inscription de votre produit (au Canada)

Registro del producto (EE.UU.)

To register your Graco product from within the U.S.A. visit us online at

www.gracobaby.com/productregistration. We currently do not accept product

registrations from those living outside the United States of America.

Pour inscrire votre produit Graco aux États-Unis, visitez notre site Internet

www.gracobaby.com/productregistration. Pour le moment nous n’acceptons pas

d’inscriptions de produits des résidents hors des États-Unis.

Para registrar su producto Graco desde dentro de los EE.UU., visítenos en línea en

www.gracobaby.com/productregistration. Actualmente no aceptamos registros

de los productos de quienes viven fuera de los Estados Unidos de América.

Failure to follow these warnings and the assembly

instructions could result in serious injury or death.

This device is designed only to monitor the sounds of your child. It will not alert you to your child’s silent activities. This product is not designed or intended for use as a medical monitor. Always be sure that both the transmitter and receiver are working properly and are within range of each other.

• STRANGULATION HAZARD. Keep the adapter cords out of the reach of children. Do not use with extension cords.

• DO NOT place the Nursery Unit or its cord within your child’s reach. Do not put the Nursery Unit inside a crib or play yard.

• Use ONLY with 110-120 volt AC electrical outlets.

• Protect the AC adapter cords. Place them so they are not walked on or pinched by furniture or other items.

• Allow for proper ventilation when units are in use. Do not cover the Nursery Unit or Parent Units with any object such as a blanket. Do not place it in a drawer or in any location which would muffle the sound or interfere with the normal flow of air.

• DO NOT immerse any part of the Nursery Unit or Parent Unit in water. Clean only with a dry cloth.

• DO NOT place unit near water and moisture. Do not use the Nursery Unit outdoors. Do not use the monitor near possible wet areas, such as a bathtub, shower, wash basin, sink, laundry tub, swimming pool, wet basement, etc.

• Keep Nursery Unit away from heat sources, such as fireplaces, radiators, stoves, and TVs or other appliances. Heat can damage the case or electrical parts.

• DO NOT use the monitor if:

• The adapter cords or plugs have been damaged.

• The unit has been exposed to liquids.

• Unit has been dropped or is damaged.

• DO NOT OPEN THE TRANSMITTER, RECEIVER OR ADAPTER. No user-serviceable parts inside. Risk of electrical shock, fire or death.

System Setup

Installing a Battery

The Parent’s Unit can be operated on 9 volt battery power. An alkaline battery is recommended. Battery changing should only be done by an adult.

1 2

Battery Use Tips

• Remove battery from Parent’s Unit if it will not be used for a long time.

• Remove a dead battery promptly. A dead battery left in unit may leak, damaging your unit.

• Do not attempt to recharge a non-rechargeable battery.

• A rechargeable battery CANNOT be recharged by plugging AC adapter into the Parent’s Unit. Remove the battery from unit to recharge it.

• Charging of a rechargeable battery should only be done by an adult.

• Battery power will be conserved when Parent’s Unit is powered through AC adapter. It is not necessary to remove battery when using AC adapter.

• Change battery if:

• Signal reception becomes poor.

• Static noise develops (also check for appliance interference).

• Indicator lights begin to dim.

Using AC Adapters

• The Parent’s Unit can use either a 9 volt battery or standard 120 volt AC household current. The Nursery Unit uses standard 120 volt AC household current only. The included AC adapters must be used for this purpose.

• To use AC adapters, plug the connector on the cord into the AC adapter jack on the side of the unit. Then plug adapter into a standard wall outlet.

• Use ONLY the Graco adapters included with the unit. Do not use these adapters with other equipment under any circumstances.

• If units do not work, check that AC adapters are plugged into working outlets.

• When electricity is off (from a power failure, etc.), the transmitter will NOT work, since it only operates on AC current.

Selecting Channels

• Check that both Nursery Unit and Parent’s Unit are set to the same channel.

• To change channel, slide Channel button to either A or B on BOTH units.

Setting Up the Baby Monitor

1. Check that both Nursery Unit and Parent’s Unit are set to the same channel.

2. Place the Nursery Unit within 10 feet (2-3 meters) of your baby. Plug an AC adapter into the jack on the side of the Nursery Unit. Plug it into a working 120 volt AC outlet.

3. Aim the Nursery Unit toward your baby. Check that there are no walls or large objects that could block sound transmission.

4. Turn on the Nursery Unit using the ON/OFF switch. The green power light should come on.

5. Install a 9 volt battery into the Parent’s Unit, or plug it into a working 120 volt AC outlet using the other AC adapter.

6. Turn on the Parent’s Unit using the volume control dial. The red power light should come on.

Testing the System

It is VERY IMPORTANT to test the system when first set up, and at regular times thereafter. Test the units any time they may have been damaged or have not been used for a long time.

1. If two adults are present, have one take the Parent’s Unit to different locations, trying various volume settings, while the other speaks into the Nursery Unit.

2. If only one adult is available, place a ticking clock, radio, or other sound-producing device near the Nursery Unit to test it.

3. When testing, keep the level of your child’s sounds in mind, and adjust the volume accordingly.

4. If there is sound interference, switch both the Nursery Unit and the Parent’s Unit to the other channel setting.

NOTE: As with all radio frequency devices, transmission range and reception may vary. Your Nursery Monitor uses public airwaves, so it is possible for conversations near the Nursery Unit to be broadcast to other nursery monitors, radios, cordless phones or scanners outside your home. For your privacy, always turn off the Nursery Unit when not in use.

Operation

To Listen To Baby

• Check that Nursery Unit and Parent’s Unit are on the same channel.

• Turn on Nursery Unit using the ON/OFF switch.

• Turn on Parent’s Unit using the Volume ON/OFF switch.

+ 16 hidden pages