Graco SnugRide Classic Connect 22 Replacement, SnugRide Classic Connect 35 Replacement User Manual

2

Pull harness straps

through seat back and

seat pad.

To Remove Existing Harness Tongues and Buckle and Attach Replacement Buckle

4

Remove chest clip.

DO NOT DISCARD

the chest clip.

8

Unbuckle harness

by tilting top of

buckle down,

press top of

red button, and

pull tongues

out of buckle.

Remove and

discard tongues.

Slide NEW buckle

onto harness straps.

MAKE sure not to

twist straps.

Re-attach chest clip.

MAKE sure not to

twist straps.

Re-insert straps through slots

in seat pad and seat back.

See carseat owner’s manual

for proper height setting for

your child.

To loosen straps, lift
harness tightener and
pull harness straps out.

SnugRide® Classic Connect™ 22 Rear Adjust
Buckle Replacement Guide

Turn page over to
nish the rest of
the assembly
Steps 10 to 15
for the buckle
replacement.

©2014 Graco PD265294B 1/14

Re-insert straps back into the tightener

and cross the tails through the belt path as

shown.

1

3

5

6

7

9

12

13

Pull on crotch strap to

be sure it is secured.

Insert NEW tongues

into buckle.

Graco Children’s Products

3 Glenlake Parkway Atlanta, GA 30328
1-800-345-4109 www.gracobaby.com

15

14

Insert metal

retainer from
NEW buckle into
crotch slot in the

seat pad and

seat bottom as

shown.

Top View Bottom View

Push button and

remove tongues from

the NEW buckle.

11

10

Reach under
seat to the metal

retainer. Push

the retainer up

through bottom

of seat and

remove buckle

and discard.

CLICK!

FINAL CHECK :

• Tug on the buckle to be sure
it is properly secured in the
bottom of the seat and does
not come out.

• MAKE SURE the harness
straps are not twisted.

• Make sure the chest clip is
properly threaded as shown
in Step 7.

Any questions please contact us at :

Top View Bottom View