Graco Reactor E-10hp User Manual
Reactor® E-10hp
Portable High-Pressure Proportioner
Entry level system for pure and hybrid polyurea coatings
• Ideal for small to medium projects such as terraces, pools, balconies, tanks, truck bedliners,
containment and waterproofing
• Heats material fast
• Portable and easy to use
• Uses standard residential electrical outlets – no generator needed
• Affordable investment – compared to a standard Reactor which requires a generator and spray rig
Material Output
This chart determines material output based
on pressure and selected mix chamber.
Examples:
• At 2200 psi with a AW2222 mix chamber,
output is nearly 0.9 gpm
• At 1800 psi with a AR2929 mix chamber,
output is nearly 1 gpm
Recirculation Times
Use this chart to determine which Reactor E-10 model
is best suited for your application needs. This chart
determines recirculation times and tank temperatures
necessary to achieve your final spraying temperature.
• Curved portion of line represents tank temperature
• Straight vertical portion of the line represents Delta T
of primary heaters
To calculate necessary tank temperatures, subtract Delta T
from your desired spray temperature.
Examples:
• You want to spray the 230V E-10hp at 170°F (77°C).
Subtract 45°F (25°C) (Delta T) from 170°F (77°C) for a tank
temperature of 125°F (52°C). It will take about 20 minutes
of recirculation time to reach a tank temp of 125°F (52°C).
• You want to spray the 120V E-10hp at 150°F (66°C).
Subtract 30°F (17°C) (Delta T) from 150°F (66°C) for a tank
temperature of 120°F (49°C). It will take about 24 minutes
of recirculation time to reach a tank temp of 120°F (49°C).
* Startup time is 20 minutes with the 230V model.
Power, pressure and performance
Grow your business with polyurea applications
The Reactor E-10hp™ is an ideal entry-level system and is great for coating
projects such as balconies, pools, waterproofing and bedliner applications.
It’s a smart, affordable investment that will help your business grow.
2
And even though it’s an entry-level system, it still packs plenty of power. The Reactor
E-10hp adds high pressure to give you the power and performance you need to
spray polyurea coatings. This compact unit is lightweight and portable – and even
runs on residential power so you don’t need to invest in a generator.
Boost heat for fast, 20-minute startup times*
With the system’s innovative boost heat and insulated tanks, material heats up
fast so you’re up and running sooner. In fact, you’re ready to spray in a fraction
of the time, compared to over an hour startup time on a standard Reactor E-10™.
The boost heat uses the extra available power from the motor circuit when the
machine is recirculating and applies that extra power to additional heater rods.
Which means that during recirculation mode, you have additional total heater
amperage for faster material heating.
Material Output
PRESSURE vs FLOW — E-10hp, E-10 with various mix chambers
3500
(241)
3000
PRESSURE PSI (Bar)
2500
2000
1500
1000
(207)
(172)
(138)
(103)
(69)
500
(34)
0 0.2
(.75)
E-10hp/230V
E-10hp/120V
E-10
0.4
(1.5)
AR2020
0.6
(2.3)
FLOW gpm (lpm)
(000)
0.8
(3.0)
Recirculation Times
MAX SPRAY TEMPERATURE vs TIME — E-10hp, E-10
180°
(82)
160°
(71)
)
°C
(
140°
(60)
120°
(49)
100°
(assuming 1 gpm flow)
(38)
80°
(27)
MAXIMUM SPRAY TEMPERATURE °F
60°
(16)
∆ = 45°F (25°C)
0 10 3020 40 50 60 70
∆ = 30°F (17°C)
∆ = 27°F (15°C)
TIME (minutes)
AW2222
1
(3.8)
∆ = 26°F (14°C)
AR2929
(00)
AR4242
MACHINES
E-10
E-10hp
-120V
E-10hp-230V
MIX CHAMBERS
1.2
(4.5)
AR2020
(000)
AW2222
AR2929
(00)
AR4242
(01)
MACHINES
230V
Reactor E-10hp
120V
Reactor E-10hp
230V
Reactor E-10
120V
Reactor E-10
(01)
Loading...