TEST REPORT
NUMBER: SHAH01463497
DATE: Jul 06, 2022
Checklist
Jpma Certification Program
Manufacturer/Participant: STORK CRAFT MANUFACTURING INC Test Date: Jun 08, 2022
Address: 250-3993 Howard Hughes Parkway Turn Around Time: 20 WD
04532-401 04532407 04532-40B
04532-40V 04532415 04532-471
City/St/Zip: Las Vegas, NV USA 89169 Model Number:
Qingdao Dimei WOOD Co., LTD
No.8 Zhengda Road
Jiaozhou City 15300
Supplier (Name and
Location):
Date of Manufacture:
China 261021
Product Name: Teddi Convertible crib
Initial
04532-41F
Basic Model Prototype Model Modification 1st Quarter 2nd Quarter
Production Retest Previous Test Date 3rd Quarter 4th Quarter
P = Pass F = Fail N/A = Not
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233
Telephone: +86 21 6120 6060 Facsimile: +86 21 6127 9740
上海天祥質量技術服務有限公司
上海市宜山路 801 號金陵商務廣場 B 座 200233
www.intertek.com www.intertek.com.cn
Page 1 of 14
TEST REPORT
Evaluation Citation Attribute Result
JPMA Protocols
1 California Proposition 65 California Proposition 65 As Applicable P(See #3 & #4)
2 FCC part 15 Electronic products NA
3 IABFLO Law label NA
Labeling
4 19 CFR 134 Country of origin P
5 Title 17, CA
CARB formaldehyde document and label review
Code of Regulations,
Section 93120.7(d)
Fabricator Label
Requirements
6 CPSIA section 103(a) Tracking labels for children's products P
7 16 CFR 1130 Registration card for durable nursery product P
9 ASTM F963 Labeling Review – Battery Operated Product NA
10 16 CFR 1505 Electrically Operated Toys NA
11 ASTM F2088 Transformer UL/ETL or equivalent Labeling NA
12 ASTM F963 Toys Labeling Review – magnets NA
13 16 CFR 423 Care Label NA
15 California, New York,
Plastic sheet / bag requirement NA
Chicago, Massachusetts,
Virginia and Rhode Island
State and City Laws CA
Code 22200-22202, RI
Code 11-9-16
17 - - Instruction Review P
18 - - UPC #, Item number or style number NA
19 40 CFR 770.45 Labeling of Compostive Wood Product - Formaldehyde
Emission (EPA)
Analytical
20 FDA FSSE 21 CFR 175-
Food Contact Materials NA
177
21 16 CFR 1500.231 Hazardous Liquids NA
22 16 CFR 1500.3(c)(6)(iii)
Flash point of combustible liquid NA
16CFR 1500.43(a)
23 CPSIA Section108* / 16
Phthalate contents – 8 P(See #1)
CFR 1307 / CA Prop 65 /
CPSC-CH-C1001-09.3
(Mod) / CPSD-AN-00095MTHD / CPSD-AN-00143MTHD / 16 CFR 1308
24 ASTM F963 Soluble heavy metal contents in surface coatings P(See #2)
25 ASTM F963 Soluble heavy metal contents in substrate materials P(See #2)
26 CPSIA Section 101 Total lead content in substrate materials P(See #6)
27 16 CFR 1303 Total lead content in surface coatings P(See #5)
28 Mercury- Containing and
Total mercury content in batteries and button cell batteries NA
Rechargeable
Battery Mgmt Act U.S. Pub.
L. 104-142
NUMBER: SHAH01463497
DATE: Jul 06, 2022
P
P
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233
Telephone: +86 21 6120 6060 Facsimile: +86 21 6127 9740
上海天祥質量技術服務有限公司
上海市宜山路 801 號金陵商務廣場 B 座 200233
www.intertek.com www.intertek.com.cn
Intertek Testing Services Ltd., Shanghai
Page 2 of 14
TEST REPORT
Evaluation Citation Attribute Result
29 40 CFR 770.10 / 40 CCFR
Formaldehyde Emission of Composite Wood Product (EPA) P
770.17 / 40 CFR 770.18
Hazard
30 ASTM F1169&F1821 Juvenile Products See Part I
31 ASTM F963 Juvenile Products Battery Operated NA
32 ASTM F963 Toy Accessories NA
33 16 CFR 1505 Electrically operated products - document review NA
34 ASTM F2088 Electrical Testing NA
35 Toxics in packaging act Toxics in packaging (TPCH) P(Provided)
36 ASTM F963 Mechanical hazards – magnets NA
37 - - Mercury - Total Content NA
38 Illinois Lead Poisoning
Illinois lead content P(See #7)
Prevention Act
39 16 CFR 1501 Small part P
40 16 CFR 1500.48 Sharp points P
43 16 CFR 1500.49 Sharp edges P
Flammability
44 California flammability
California technical bulletin 116 flammability NA
regulations title 4 chapter 3
45 16 CFR 1500.44 Flammability of solids P
Physical Characteristics
46 AATCC 20A Fiber analysis: quantitative NA
47 - - Overall dimensions and weight R: 53.5 in. * 29.4
48 NY, MD, WA, VT, HI, ME,
Flame Retardants NA
OR, RI and CA
49 NY Albany County Local
The Toxic Free Toys Act P(See #2)
Law No. 1 for 2015 and NY
Suffolk County Local Law
No. 26 of 2017
Abbreviation : P = Pass; F = Fail; N/A = Not Applicable; N/T= Not Tested;
MCD = Manufacturer Conformity Declaration; nr = not requested by the applicant; NES = Not Enough Sample
Remark:
#1
1.The evaluation or testing related to packaging and labeling is based on the artwork submitted by the applicant rather than on the
actual sample of packaging and labeling.
2. Part of the evaluation or testing need to perform the actual sample and was not conducted, those include: The height of typeface.
Conclusion:
PASS
FAIL
For Information Only
NUMBER: SHAH01463497
DATE: Jul 06, 2022
in. * 33.5 in.
N.W.: 21.2kg
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233
Telephone: +86 21 6120 6060 Facsimile: +86 21 6127 9740
上海天祥質量技術服務有限公司
上海市宜山路 801 號金陵商務廣場 B 座 200233
www.intertek.com www.intertek.com.cn
Intertek Testing Services Ltd., Shanghai
Page 3 of 14
TEST REPORT
Part I
STANDARD CONSUMER SAFETY SPECIFICATION FOR FULL-SIZE BABY CRIBS
With reference to ASTM F1169-19 Standard Consumer Safety Specification for Full-Size Baby Cribs, the submitted sample was
subjected to the following tests:
Number of Sample Tested: One (1) Piece
Initial inspection: No any damage was found
Executive Summary:
Clause Test items Verdict
1 Scope 2 Referenced Documents 3 Terminology 4 Calibration and Standardization 5 General Requirements P
5.1 Wood Parts P
5.2 Surface Coatings P(See #5)
5.3 Small Parts P
5.4 Corner Posts P
5.5 Slat Construction P
5.6 Crib Side Configurations P
5.7 Full-size baby cribs-dimensions P
5.8 Spacing of crib components P
5.9 Toe holds P
5.10 Hardware and fasteners P
5.11 Toy NA
5.12 Recordkeeping -
5.13 Before and after testing, the product shall comply with all the requirement of section 5 P
5.14 Sharp points/sharp edges P
5.15 Flammability test P
5.16 Openings P
5.17 Scissoring, shearing, or pinching P
5.18 Labeling P
5.19 Cord/strap length NA
5.20 Cribs that fold for storage or transport NA
6 Performance Requirements P
6.1 Plastic teething rail test requirement NA
6.2 Cycle testing P
6.3 Crib side latch test requirement NA
6.4 Mattress support system vertical impact test requirements P
6.5 Mattress support system test requirement P
6.6 Crib side test requirement P
6.7 Spindle/slat strength testing P
6.8 Cutouts NA
6.9 Entrapment in accessories NA
6.10 Mattress support system openings P
6.11 Test order 7 Test Methods 8 Marking and Labeling P
9 Instructional Literature P
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233
Telephone: +86 21 6120 6060 Facsimile: +86 21 6127 9740
上海天祥質量技術服務有限公司
上海市宜山路 801 號金陵商務廣場 B 座 200233
www.intertek.com www.intertek.com.cn
NUMBER: SHAH01463497
DATE: Jul 06, 2022
(See Remark #1)
(See Remark #1)
Page 4 of 14
TEST REPORT
Clause Test items Verdict
10 Keywords -
Abbreviation: P=Pass F=Fail NA=Not Applicable NC=Not Conducted NR = Not Requested
Part I
STANDARD CONSUMER SAFETY SPECIFICATION FOR FULL-SIZE BABY CRIBS
With reference U.S. CFR title 16(CPSC regulations) part 1219 safety standard for Full-Size Baby Cribs, the submitted sample was
subjected to the following tests:
Number of Sample Tested: One (1) Piece
Initial inspection: No any damage was found
Executive Summary:
Clause Test items Verdict
1 Scope 2 Referenced Documents 3 Terminology 4 Calibration and Standardization 5 General Requirements P
5.1 Wood Parts P
5.2 Surface Coatings P(See #5)
5.3 Small Parts P
5.4 Corner Posts P
5.5 Slat Construction P
5.6 Crib Side Configurations P
5.7 Full-size baby cribs-dimensions P
5.8 Spacing of crib components P
5.9 Toe holds P
5.10 Hardware and fasteners P
5.11 Toy NA
5.12 Recordkeeping -
5.13 Before and after testing, the product shall comply with all the requirement of section 5 P
5.14 Sharp points/sharp edges P
5.15 Flammability test P
5.16 Openings P
5.17 Scissoring, shearing, or pinching P
5.18 Labeling P
5.19 Cord/strap length NA
5.20 Cribs that fold for storage or transport NA
6 Performance Requirements P
6.1 Plastic teething rail test requirement NA
6.2 Cycle testing P
6.3 Crib side latch test requirement NA
6.4 Mattress support system vertical impact test requirements P
6.5 Mattress support system test requirement P
6.6 Crib side test requirement P
6.7 Spindle/slat strength testing P
6.8 Cutouts NA
6.9 Entrapment in accessories NA
6.10 Mattress support system openings P
6.11 Test order 7 Test Methods 8 Marking and Labeling P
Intertek Testing Services Ltd., Shanghai
Block B, Jinling Business Square, No.801 YiShan Road, Shanghai, China. 200233
Telephone: +86 21 6120 6060 Facsimile: +86 21 6127 9740
上海天祥質量技術服務有限公司
上海市宜山路 801 號金陵商務廣場 B 座 200233
www.intertek.com www.intertek.com.cn
NUMBER: SHAH01463497
DATE: Jul 06, 2022
Page 5 of 14
Loading...