24 ASTM F963 Soluble heavy metal contents in surface coatings P (see#5)
25 ASTM F963 Soluble heavy metal contents in substrate materials P (see#5)
26 CPSIA Section 101 Total lead content in substrate materials P (see#6)
27 16 CFR 1303 Total lead content in surface coatings P (see#7)
28 Mercury- Containing and
Total mercury content in batteries and button cell batteries NA
Rechargeable
Battery Mgmt Act U.S. Pub.
L. 104-142
29 40 CFR 770.10 / 40 CCFR
Formaldehyde Emission of Composite Wood Product (EPA) P
770.17 / 40 CFR 770.18
Hazard
30 ASTM F2388 Juvenile Products See Part I
31 ASTM F963 Juvenile Products Battery Operated NA
32 ASTM F963 Toy Accessories NA
33 16 CFR 1505 Electrically operated products - document review NA
34 ASTM F2088 Electrical Testing NA
35 Toxics in packaging act Toxics in packaging (TPCH) P (provided)
36 ASTM F963 Mechanical hazards – magnets NA
37 - - Mercury - Total Content NA
38 Illinois Lead Poisoning
Illinois lead content P (see#8)
Prevention Act
39 16 CFR 1501 Small part P
40 16 CFR 1500.48 Sharp points P
43 16 CFR 1500.49 Sharp edges P
Flammability
44 California flammability
California technical bulletin 116 flammability NA
regulations title 4 chapter 3
45 16 CFR 1500.44 Flammability of solids P
Physical Characteristics
46 AATCC 20A Fiber analysis: quantitative NA
47 - - Overall dimensions and weight R: 35 in.*38.1
48 NY, MD, WA, VT, HI, ME,
Flame Retardants P (see#9)
OR, RI and CA
49 NY Albany County Local
The Toxic Free Toys Act P (see#5)
Law No. 1 for 2015 and NY
Suffolk County Local Law
No. 26 of 2017
Abbreviation : P = Pass; F = Fail; N/A = Not Applicable; N/T= Not Tested;
MCD = Manufacturer Conformity Declaration; nr = not requested by the applicant; NES = Not Enough Sample
Conclusion:
PASS
FAIL
For Information Only
Part I
1.SAFETY SPECIFICATION FOR BABY CHANGING TABLES
With reference to ASTM F2388-18 Standard consumer safety specifications for Baby Changing Tables for Domestic Use, the
submitted samples were subjected to the following tests:
Number of Sample Tested: One ( 1 ) Piece
Initial inspection: No any damage was found
Executive summary:
Clause Test items Verdict
1 Scope. 2 References documents. 3 Terminology 4 Calibration and Standardization 5 General requirements P
5.1 Sharp point and edge P
5.2 Small parts P
5.3 Surface coatings P (see#7)
5.4 Wood parts P
5.5 Openings P
5.6 Attachable unit NA
5.7 Toys accessories NA
5.8 Threaded Fasteners P
5.9 Protective Components NA
5.10 Consumer Product Safety Improvement Act. See Table #1
5.11 Scissoring, Shearing, and Pinching P
5.12 Applicable requirements of that standard NA
6 Performance requirements P
6.1 Structural Integrity P
6.2 Stability P
6.3 Barriers P
6.4 Retention of Contoured Changing Pads and Add-on Changing Units NA