Graco GX16 Mixhead User Manual

GX16 Mixhead
For NVH Foam Applications
Depend on the GX16 for reliable performance and repeatable results
• Lightweight and ergonomic for easy handling
• Fluids continuously circulate to ensure accurate conditioning
• Manual or machine mount
• Hydraulically actuated
• 250,000 shot warranty
Optimum performance for NVH foam applications
How the GX16 works
Ordering Information
Basic mixheads have no orifices in them.
The 24:1 mixheads have .011 and .061 orifices for 24:1 ratio.
24J187 - 24:1 Straight
24E877 - 24:1 Right
24K233 - 24:1 Left
24E876 - Basic Straight
24E878 - Basic Right
24K234 - Basic Left
24K223 - Handle kit
Technical Specifications
Flow rates 4.6 to 20 lb/min (2 to 9 kg/min)
Max fluid working pressure 3000 psi (207 bar, 21 MPa)
Max hydraulic working pressure 2500 psi (172 bar, 17 MPa)
Max fluid temperature 180°F (82°C)
Weight (base) 3.8 lb (1.7 kg)
Circulation Position
The two reactive materials used to create foam,
“A” and “B,” are kept separate until they reach the
GX16 mixhead. If the gun is not dispensing, the
materials simply circulate back to the day tanks.
Dispense Position
During the dispense mode, the metering pumps
precisely deliver both materials to the mixing head
at the required ratio, flow rate and temperature.
The chemicals combine in the mix chamber by
impingement mixing. The mixture is then injected
into a mold or cavity.
Contact us today!
To receive product information or talk with a Graco representative, call 800-746-1334 or visit us online at www.graco.com.
Loading...