Page 1
© 1997 Graco 767-12-97
Congratulations on your purchase of a
Graco
®
stroller!
Graco is a world leader in strollers and
has helped thousands of parents transport
their children in comfort. We believe your
new Graco
®
stroller is a wise choice,
promising many hours of enjoyment for
your baby.
Before using your stroller, please take a
few minutes to read this Owners Manual.
The short time you spend reading these
instructions will help you assemble and
use your stroller properly.
Please save your Owners Manual
for future use.
Customer Satisfaction
Our goal is to make every product the best it can
be! We are also committed to supporting our
products after purchase. If you would like to speak
to Graco about your product, please contact our
Customer Service Department at 1-800-345-4109.
Our knowledgeable staff will be ready to answer
any questions you may have concerning parts, use
or maintenance. When you call, please have the
model and serial numbers ready so your call may
be processed quickly and efficiently.
OWNERS
MANUAL
Model No.
Serial No.
Dear Customer,
Please fill in the
model and serial
numbers above
from the label on
the rear leg of
your new stroller.
Stroller
7800 Models
234
Avoid serious injury from falling or
sliding out. Always use seat belt.
Never leave child unattended.
Always keep your child in view.
DO NOT place purses, shopping
bags, parcels and accessory items
on handle or canopy. They may fall
on the child or change the balance
of the stroller and make it unstable.
Use of the stroller with a child weighing
more than 40 lbs. (18.1 kg) will cause
excessive wear and stress on the
stroller. Use the stroller with only one
child at a time.
Use care when reversing handle to
avoid catching childs arms or hands
in the mechanism. When making
adjustments to your stroller, always
be sure that all parts of your childs
body are clear of any moving parts.
TO PREVENT A HAZARDOUS CONDITION, do not place more than 10 lbs.
(4.5 kg) in the storage basket.
DO NOT ALLOW YOUR CHILD to stand on the basket. It may collapse and
cause injury.
NEVER ALLOW YOUR STROLLER to be used as a toy.
STROLLER TO BE USED only at walking speed. Product not intended for use
while jogging, skating, etc.
AVOID STRANGULATION. DO NOT place items with a string around your childs
neck, suspend strings from this product, or attach strings to toys.
DISCONTINUE USING YOUR STROLLER should it become damaged or broken.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE.
FOR ADDITIONAL IMPORTANT INFORMATION, please
see the Helpful Hints and Care and Maintenance sections
in these instructions.
Page 2
Failure to follow these warnings and the assembly
instructions could result in serious injury or death.
Be certain the stroller is fully erected
and latched before allowing your
child near the stroller.
Never place child in the stroller with
head toward front of the stroller.
Never use stroller on stairs or escalators.
You may suddenly lose control of the
stroller or your child may fall out. Also,
use extra care when going up or down a
step or curb.
Child may slip into leg openings
and strangle. Never use in reclined
carriage position unless footrest is
placed under padded front bar and
wire snapped into lower notch.
FOR ADDITIONAL IMPORTANT INFORMATION, please
see the Helpful Hints and Care and Maintenance sections
in these instructions.
STRANGULATION HAZARD: Never
use your stroller with the arm bar
extended without the boot properly
attached.
Page 3
5
767-12-97
To Install Handle (on certain models)
Step 1.
Turn handle brackets
straight up.
Step 2.
Position handle as shown.
Step 3.
Place both sides of handle
into brackets and push down
until latched.
Rear axle assembly with brake wire:
Step 1.
Turn stroller over as pictured above.
Step 2.
Position rear axle assembly as shown.
Step 3.
Start sliding both brackets onto leg tubes at the same time.
Step 4.
Push both brackets all the way on until metal buttons snap
into bracket holes on inside of legs.
Step 5.
Pull firmly on each bracket to be sure buttons are snapped
into bracket holes.
67
Retainer (2,
1 extra)
Rear wheel (2)
Cap (2,
1 extra)
Front wheel
assembly (2)
Pin (2)
Handle
bent
towards
rear
Handle
bracket
To Assemble Rear Wheels
Place one rear wheel, red retainer, and white cap on one
end of rear axle in order as shown below. Push red retain-
er onto axle BEFORE attaching white cap. Repeat on other
side.
NOTE: Be sure buttons are securely latched in bracket
holes. Check by pulling firmly up on handle.
PARTS LIST
CHECK that you have all the parts listed below
BEFORE assembling your stroller.
If any parts are missing, call Customer Service
at 1-800-345-4109.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
No tools required for assembly.
Handle
(on certain
models)
Frame
Swivel lock
button (2)
To Unpack Stroller
Step 1.
Flatten stroller carton to
protect floor.
Step 2.
Open stroller on
carton as shown
until latched.
Flattened
carton
Latch
Hub cap (2)
(on certain models)
Rear axle
assembly with
brake wire
Rear axle
OR
Rear axle:
Step 1.
Turn stroller over as shown.
Step 2.
Slide the rear axle through the
holes in both axle brackets.
To Assemble Rear Axle
Your stroller will have either a rear axle or a rear axle
assembly with brake wire. Follow the appropriate
instructions below.
Boot
Page 4
8
Rear axle assembly with brake wire:
Step 1.
Turn stroller over as pictured above.
Step 2.
Position rear axle assembly as shown.
Step 3.
Start sliding both brackets onto leg tubes at the same time.
Step 4.
Push both brackets all the way on until metal buttons snap
into bracket holes on inside of legs.
Step 5.
Pull firmly on each bracket to be sure buttons are snapped
into bracket holes.
Smooth side of
brackets UP
Button
Rear legs
To Assemble Rear Wheels
Place one rear wheel, red retainer, and white cap on one
end of rear axle in order as shown below. Push red retainer onto axle BEFORE attaching white cap. Repeat on other
side.
Wheel
Spokes
toward
inside
Rear
axle
Retainer (red)
Wide end
toward wheel
Step 1.
Snap swivel lock button onto
wheel mount as shown. This
must be done BEFORE pin
is inserted (next step).
Step 2.
Insert pin through hole in
wheel mount. Then push
round end of a front wheel
assembly up onto pin as
shown until it snaps into
place.
NOTE: Check wheel attachment by pulling down on the
front wheel assembly.
Step 3.
Repeat above steps for the
other side.
Insert pin
Push
wheels up
To Assemble Front Wheels
Snap red retainer into
axle groove. Then snap
cap over red retainer
as shown. Be sure cap
is snapped securely
over red retainer.
Cap (white)
Attach AFTER
retainer is
on axle
To Unfold Stroller
Step 1.
Unfold footrest from under
armrest.
Step 2.
Release storage latch.
Step 3.
Unfold as shown.
Be certain
the stroller is fully erected
and latched before allowing
your child near the stroller.
Round
end
Hub cap
(on
certain
models)
Page 5
9
767-12-97
To Use Brakes
Always apply
brakes to park stroller.
Push DOWN on center of
wire to park.
Lift UP to stroll.
To Change to Swivel
or Non-swivel Wheels
Front swivel wheels lock for use on uneven surfaces
such as grass, stones or gravel.
Before locking swivels, push stroller forward a
few feet to ensure that the wheels are correctly
positioned.
Push buttons up or down, depending on model, to lock
or release swivels. Turn swivel to check that it is locked
or released.
To Move Handle to
Carriage Position
Step 1.
Pull up on both plastic slides on
the handle as shown to unlock.
Step 2.
Move handle to new position.
NOTE: Remember to reverse
the swivel wheels when reversing the handle.
Use care when reversing handle to
avoid catching childs arms or hands in the folding
mechanism.
To Use Canopy
To open canopy, pull it forward.
Canopy bag (on certain models)
carries a maximum of 2 pounds
(0.9 kg).
On certain models, you can
unzip the rear panel and fold it
out of the way to see your baby.
To Use Head Supports
Back of cloth seat pad
To use stroller with a smaller
child, pull the plastic pieces from
pockets located in the back of
the cloth seat pad, and reinsert
them with curved side toward
the front.
To use stroller with a larger
child who does not need head
support, insert the plastic pieces
with the curved side toward the
back.
To Use Basket
To lower basket, push DOWN
on basket.
To raise basket, lift UP on
basket.
Do not allow
your child to stand on the
basket. It may collapse and
cause injury.
To Adjust Handle Height
Push both buttons and slide
handle to one of the four
possible positions.
Be sure handle is engaged in
one of the latching positions.
To Adjust Back
Step 1.
Push back of seat slightly
forward while squeezing as
shown to unlock.
Step 2.
Adjust to desired position.
To Raise Footrest
Lift footrest to desired position
and hook wire into footrest
bracket.
slip into leg openings and
strangle. Never use in a
reclined carriage position
unless footrest is placed
under padded front bar and
wire is snapped into lower
notch.
To Adjust or Remove
Arm Bar (on certain models)
Step 1.
Feel through fabric at sides
for buttons. Push in buttons to
move the arm bar to extended
position or remove it.
After extending arm bar or
returning it to original position,
pull on bar to be sure both sides
are attached.
Step 2.
To replace the arm bar after removing it, push arm bar into
armrest holes until it locks in place. Pull on bar to be sure
both sides are attached.
Page 6
1210 11
To Adjust Back
Step 1.
Push back of seat slightly
forward while squeezing as
shown to unlock.
Step 2.
Adjust to desired position.
Adjustable arm bar:
Step 1.
Move the arm bar to extended position. Pull on bar to
be sure both sides are attached.
Step 2.
Raise footrest and place boot
under footrest. Slide boot over
front of stroller. IMPORTANT:
Snap straps at bottom of boot
around front legs on both sides
as shown.
Step 3.
Snap straps at top of boot
around stroller frame on both
sides as shown.
STRANGULATION HAZARD. Never
use your stroller with arm bar extended without the
boot properly attached.
To Raise Footrest
Lift footrest to desired position
and hook wire into footrest
bracket.
Child may
slip into leg openings and
strangle. Never use in a
reclined carriage position
unless footrest is placed
under padded front bar and
wire is snapped into lower
notch.
To Adjust or Remove
Arm Bar (on certain models)
Step 1.
Feel through fabric at sides
for buttons. Push in buttons to
move the arm bar to extended
position or remove it.
After extending arm bar or
returning it to original position,
pull on bar to be sure both sides
are attached.
Step 2.
To replace the arm bar after removing it, push arm bar into
armrest holes until it locks in place. Pull on bar to be sure
both sides are attached.
Buttons under fabric
To Attach Boot
The method of boot attachment depends on whether or
not your stroller has an adjustable front arm bar. Follow
the appropriate instructions below.
Non-adjustable arm bar:
Step 1.
Raise footrest and place boot
under footrest. Slide boot over
the front of stroller.
Step 2.
Snap straps at top of boot
around stroller frame on both
sides as shown.
Page 7
13
767-12-97
14
To Fold Stroller
Before folding, (1) adjust back to upright position;
(2) adjust handle to rear position; (3) fold canopy;
(4) remove boot if installed.
HINT: Lower the collapsible basket first to provide
easier access to the folding latch.
Step 1.
Push on latch to fold as shown.
OR
To Wash Seat With Removable
Boards (on certain models)
Remove the cloth seat pad from the stroller and unsnap
the seat from the stroller frame.
Remove the four boards from the pockets on the underside of the seat by pulling the boards out from under
the flaps.
The seat may be machine washed in lukewarm water
on delicate cycle and drip-dried. NO BLEACH.
When the seat is completely dry, place the boards back
in the pockets and tuck the boards under the flaps so
they will be held securely in the pockets.
Snap the seat to the frame and replace the seat pad.
Entrapment or suffocation hazard:
DO NOT use the seat without the boards.
Step 2.
Push handle forward.
Step 3.
Release secondary latch (on
certain models) as shown.
Step 4.
Lock storage latch.
To Secure Your Child
Step 1.
Place crotch strap between
childs legs. Snap both side
buckles to the center buckle.
Adjust belt as needed to get
a snug fit around your child.
Step 2.
Push in on front of buckle to
release.
Avoid serious injury from falling or
sliding out. Always use seat belt.
Page 8
Return the form below with payment to:
GRACO CHILDRENS PRODUCTS INC.
CUSTOMER SERVICE DEPARTMENT
MAIN STREET
ELVERSON, PA 19520
Replacement Parts
IF YOU NEED HELP
If you have any questions, please call toll-free:
1-800-345-4109
Model Number
(Must be filled in)
SHIP TO:
Name
Address
City, State, Zip
( )
Telephone
Total:
6% sales tax
(PA only):
Total amount
due:
Check enclosed
(payable to Graco Childrens
Products Inc.)
Charge to credit card:
Visa
MasterCard
Discover
Account #:
Expiration date:
Signature:
Removable seat pad
Front wheel assembly
Rear axle
Rear axle assembly
Rear wheel
Adjustable arm bar
Basket
Boot (adjustable
arm bar)
Boot (non-adjustable
arm bar)
Canopy
Handle
Seat with permanent
boards
Seat with removable
boards
1615
Instructions for ordering stroller parts:
Complete form below. Your stroller model number MUST
be included on the form to ensure proper replacement
parts. Your model number can be found on a sticker on
the rear leg of your stroller. Payment must accompany
your order.
Parts List:
Removable seat pad ................................
Front wheel assembly ..............................
Rear axle ..................................................
Rear axle assembly with wire ...................
Rear wheel ...............................................
Adjustable arm bar* ..................................
Basket .......................................................
Boot (for adjustable arm bar) ...................
Boot (for non-adjustable arm bar) ............
Canopy .....................................................
Handle ......................................................
Seat with permanent boards* ...................
Seat with removable boards* ...................
* On certain models only.
Price:**
$ 22.00
$ 15.00 (each)
$ 7.00
$ 15.00
$ 7.00 (each)
$ 15.00
$ 12.00
$ 15.00
$ 12.00
$ 17.00
$ 25.00
$ 30.00
$ 30.00
** Prices subject to change
without notice.
HELPFUL HINTS
IF WHEEL SQUEAKS, use a
light oil (e.g., WD-40, 3-in-1,
or sewing machine oil). It is
important to get the oil into
the axle and wheel assembly
as shown.
WHEN USING YOUR STROLLER OVER
UNEVEN SURFACES (such as grass, stones,
and gravel), lock front swivel wheels.
BEFORE LOCKING FRONT SWIVELS, it is
important to first push the stroller forward a few
feet to ensure that the wheels are correctly
positioned.
WHEN USING YOUR STROLLER AT THE
BEACH, completely clean your stroller
afterward to remove sand and salt from
mechanisms and wheel assemblies.
CARE AND MAINTENANCE
DO NOT MACHINE WASH SEAT (with perma-
nent inner boards). It should only be wiped with
a mild detergent, taking care not to soak the
material. Seat with removable inner boards (on
certain models) may be machine washed in
lukewarm water on delicate cycle and drip-dried.
NO BLEACH.
REMOVABLE PAD may be machine washed
in lukewarm water on delicate cycle and dripdried. NO BLEACH.
FROM TIME TO TIME CHECK YOUR
STROLLER for loose screws, worn parts, torn
material or stitching. Replace or repair the parts
as needed. Use only Graco
®
replacement parts.
TO CLEAN STROLLER FRAME, use only
household soap or detergent and warm water.
NO BLEACH.
EXCESSIVE EXPOSURE TO SUN OR HEAT
could cause fading or warping of parts.
Loading...