Graco 406902B User Manual
GENUINE GRACO PARTS AND ACCESSORIES
Glazing Nozzle Kits
Finex™ Mini Gravity Feed Guns (1 mm Nozzles)
Important Safety Instructions
Read all warnings and instructions in manual
312388. Save all instructions.
Kit 24F733 Kit 24F734
Ref. Description Qty.
101 NOZZLE, glazing 1
Installation
1. Remove air cap (A), nozzle (B), and air distributor
(C) from Mini-Finex gun.
C
B
A
Ref. Description Qty.
102 AIR CAP, for glazing nozzle 1
103 O-RING 1
3. If air cap is to be used, install o-ring (103) in air cap
(102). Tighten air cap onto gun. Be sure to fully seat
the air cap on the gun so the o-ring will form to the
gun body.
102
406902B
ENG
103
ti16209a
2. Turn fluid control knob (D) counterclockwise until
fully open. Screw glazing nozzle (101) into gun and
tighten.
101
ti16210a
Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441
Original instructions. This manual contains English. MM 406902
Copyright 2010, Graco Inc. is registered to ISO 9001
Revised 12-2010
ti16211a ti16212a
Operation
Kit 24F733 only: Gun will function as a gravity feed dis-
penser.
Kit 24F733 + Kit 24F734: Addition of the air cap causes
gun to spatter the fluid for more area coverage. Use only
D
as much air pressure as needed. Do not exceed 30 psi
at the gun inlet. Excessive air pressure will cause significant overspray and material waste.
Loading...