Kit Instructions/Parts
Torqueable
406866C
Wet-Cup Kit
Kit 24F145 - To convert 3000cc and 4000cc 4-Ball Lowers from spring-loaded
throat packings and an enclosed wet-cup, to torqueable throat packings and
an open wet-cup.
Important Safety Instructions
Read all warnings and instructions in this manual and
in your 4-Ball pump manual 3A0540. Save all instructions.
34
4
8
EN
Ref. Description Qty
27 CARTRIDGE, packing, throat
30 V-PACKING; UHMWPE
31 V-PACKING; leather
32 GLAND, female
33 GLAND, male
34 WET-CUP
52 O-RING; ptfe
57 O-RING; ptfe
NOTE: Use kit 24F145 to convert the 4-Ball lowers listed
in the table below.
Lower Size (cc) Lower Part No.
3000 24F448
3000 24F449
3000 24F450
4000 24F451
4000 24F452
4000 24F453
1
6
4
1
2
1
1
1
57
33
30
31
30
32
1
1
Apply lubricant to all packings.
4
Apply thread lubricant.
7
Torque 95-100 ft-lb (129-135 N•m).
8
Torque 50 ft-lb (67 N•m), then back off
and retorque to 20-25 ft-lb (27-34 N•m).
30
31
30
31
30
31
30
33
27
7
4
52
ti16152a
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 406866
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA
Copyright 2010, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
Revised 09/2011