Graco 406825F User Manual
GENUINE GRACO PARTS AND ACCESSORIES
ti14052b
Plastic
101
102
103
104
103
104
Aluminum
Reed Switch and Solenoid
Kits 24B771 and 24B772
Husky ® 1050 and Husky ® 15120 Diaphragm Pumps
Important Safety Instructions
Read all warnings and instructions in the
®
Husky
Diaphragm Pump Repair/Parts manual. Save
all instructions.
1050 and Husky® 15120 Air-Operated
Kit 24B771
for pumps with a polypropylene or conductive polypropylene center section and air valve.
Ref. Description Qty.
101
REED SWITCH/SOLENOID ASSEMBLY 1
102
SCREW, reed switch, 10-14 x 1/2 plastite 1
103
BRACKET, solenoid 1
104
FASTENER, solenoid, M6 hex nut 2
Kit 24B772
for pumps with an aluminum center section and air valve.
Ref. Description Qty.
101
REED SWITCH/SOLENOID ASSEMBLY 1
102
SCREW, reed switch, 8-32 x 1.50 1
103
BRACKET, solenoid 1
104
FASTENER, solenoid, M6 x 25 screw 2
406825F
EN
Installation
ti14058a
S
103
104
Aluminum
pump shown
ti14056a
NOTE: These kits are intended to replace a reed switch/solenoid assembly. Contact your distributor to order the correct conversion kit to add monitoring capabilities.
1. Attach the solenoid (S) and bracket (103) to the air valve. Use the same screws (104) that attach the air valve to
the center housing, as shown.
2. Use the screw provided to attach the reed switch just behind the air inlet. Remove the muffler, if needed, for easier access. Rotate the air inlet fitting as needed so the wrench flat clears the reed switch.
3. Connect the DataTrak cable to the 5-pin connector on the reed switch. Reconnect the air line to the motor.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2009, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 406825
For patent information, see www.graco.com/patents.
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
www.graco.com
Revision F, September 2014
Loading...