Kit Instructions/Parts
15V256 Automatic
Upgrade Kit
Upgrades a ProMix® 2KS Manual Proportioner to an Automatic Proportioner.
Important Safety Instructions
Read all warnings and instructions in your ProMix 2KS
automatic installation manual and your ProMix 2KS automatic operation manual. Save all instructions.
Before Installation
1. Shut off ProMix 2KS power (0 position). Also shut off
power at main circuit breaker.
2. See the ProMix 2KS automatic system installation
manual for complete installation instructions for the
15V256 Upgrade Kit.
1
Remove existing screw and replace with new screw (7).
15V256 Kit Parts
Ref.
No. Part No. Description Qty
1 255766 BOARD, circuit, discrete I/O 1
2 n/a SUPPORT, board 4
3 n/a CONNECTOR, plug, 6 position 2
4 n/a CONNECTOR, plug, 8 position 2
5 15W023 HARNESS, wire 1
6 24A851 BOARD, automatic key 1
7 n/a SCREW, machine, pan-hd; 4-40 x
1-1/2 in. (38 mm)
Parts labeled n/a are not available separately.
5
406799A
1
ti12496a
7
1
6
1
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
This manual contains English. MM 406799
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2009, Graco Inc. is registered to ISO 9001
www.graco.com