GENUINE GRACO PARTS AND ACCESSORIES
15T632 Air Flow
Switch Kit
For ProMix® 2KS and ProMix® 2KE Electronic Proportioners
Important Safety Instructions
Read all warnings and instructions in your ProMix 2KS
or ProMix 2KE Repair-Parts manual. Save those
instructions.
Ref. Part Description Qty.
1 119159 SWITCH, air flow 1
2 104641 FITTING, bulkhead 1
3 111763 ELBOW; 1/4 npt 1
4 113029 NIPPLE; 1/4 npt 1
5 598447 CONNECTOR, tube; 1/4 npt(m) x
3/8 in. (10 mm) OD tube
ProMix 2KS Installation
1
Connect AFS#1 wires to terminals 1 and 2 at
J1 of Fluid Station Control Board.
2
Connect AFS#2 wires to terminals 3 and 4 at
J1 of Fluid Station Control Board.
1
1
3
406719B
ENG
2
4
TI13350a
2
5
J1
1
1
2
3
2
4
Fluid Station Control Board
TI13347a
See reverse for ProMix 2KE installation.
ProMix 2KE Installation
1
4
5
2
3
Install Air Flow Switch in Control Box
TI16428a
TI17265A
1
Connect AFS#1 wires to pins 1 and 2.
2
Connect AFS#2 wires to pins 7 and 8.
AFS Wires Schematic
1 142
AFS #1
1 2
78
AFS #2
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 406719
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2009, Graco Inc. is registered to ISO 9001
www.graco.com
Revised 4/2011