Page 1
Finishing Accessories
Air Prep & Controls
Hoses, Fittings,
Swivels & Gauges
Agitators
Filters
Pressure Regulators
Other Accessories
Surge Suppressors
Pressure Pots
High Quality Enhancements for Graco Finishing Systems
Page 2
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Contents
Pressure Pots
2 Gallon (8 liter) ............................4
5 Gallon (19 liter) ...........................5
10 Gallon (38 liter) ..........................6
15 Gallon (57 liter) ..........................7
2.5 Gallon (9.5 liter) .........................8
Tank Liners ...............................9
Agitators
Drum Agitators
Flange Mounted Agitators....................11
Clamp Mounted Agitators ....................12
Expanding Blade Agitators ...................13
Twistork® Agitators ........................14
Heavy Duty In-Drum Back-Geared Agitator.......15
Heavy Duty Drum Agitator with Elevator .........16
Agitator Speed Controller . . . . . . . . . . . . . . . . . . . .17
Replacement Air Motors .....................18
Pail Agitators
Pail Cover Agitator .........................19
Tank Agitators
Heavy Duty Pressure Tank Agitators . . . . . . . . . . . .20
Electric Agitators
Electric Agitators ..........................21
Other Agitators
55 Gallon Drum Covers......................25
Elevator Systems ..........................26
Air Preparation and Controls
3-Stage Desiccant Drying System .............28
3-Stage Membrane Drying System.............29
Air Control Unit............................30
In-line Air Filters and Coalescer ...............31
Low Pressure Air Regulators..................32
Air Control ...............................33
FRL Filter, Regulator, Lubricator ...............34
Pressure Regulators
Fluid Pressure Regulators
Pressure Regulators Product Matrix ............37
Low Pressure ............................39
Low Pressure Lightweight Composite...........40
Precision Flow ............................41
High Pressure Corrosion Resistant .............42
High Pressure Corrosion Resistant Mini .........43
High Pressure ............................44
Back Pressure Regulators (BPR)
Low Pressure Corrosion Resistant .............45
Low Pressure Mini .........................46
Air Operated Corrosion Resistant ..............47
Low Shear Corrosion Resistant................48
Low Pressure BPR .........................49
High Pressure BPR .........................50
Gun Regulators
Twistlock Fluid Regulator ....................51
Twisklock Circulating Restrictor Valves..........52
Twistlock Fluid Quick Couplers ................53
Surge Suppressors
High Flow................................55
In-line ..................................56
Tee.....................................57
Filters
Stainless Steel High Pressure Filter ............59
High Pressure Red Alert Filter.................60
Low Pressure Red Alert Filter .................61
Model 6 Bag Filter Housings..................62
Model 6 Bag Filter Elements..................63
Model 12 Bag Filter Housings.................64
Model 12 Bag Filter Elements.................65
Hoses, Fittings, Swivels and Gauges
Bulk Hose and Fittings - Nylon Fluid Hose........67
Bulk Hose and Fittings - Braided Fluid Hose ......68
Bulk Hose and Fittings - Flexible Air Hose........69
Coupled Stainless Steel Hoses ................70
Moisture-Lok Hoses ........................71
High Pressure Swivels ......................72
Automatic Spray Gun Valve...................73
Check Valves .............................74
Pressure Relief Valve .......................75
Ball Valves ...............................76
Pipe Fittings ..............................77
Pipe Swivels ............................78
Stainless Fittings ..........................79
Fluid and Air Gauges .......................84
Other Accessories
Standard Gun Washer.......................85
Professional Gun Washer ....................86
Fluid Heater Kit ...........................87
Siphon Kits...............................88
Ground Strap .............................90
2
Page 3
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Pots
Designed with electroplated surfaces that
prevent debris build-up and keep your
operation free of contaminants, Graco
pressure pots are precision welded and
surfaced. The siphon tube and bottom outlet
of the pressure pot allow for different feed
methods, and the liners make clean up easy
and mess free. They also meet our stringent
internal requirements that exceed industry
standards such as ASME and FM.
Pressure Pots are a crucial element of the finishing system and can be used in a variety of applications
including:
Fluid Supply Systems for Air Spray or Feeding Other Equipment:
They provide pulse-free, ultra-precise fluid delivery at low pressures and flow rates that are not reliably
attained with pumps and other equipment. This is ideal for customers that demand reliable, affordable
and easy fluid delivery.
Sealed Reservoir for Moisture Sensitive or Corrosive Materials:
Store your catalyst and other moisture sensitive materials in our sealed pressure tanks to protect
material consistency. Pressure tanks are ideal for supplying 2K proportioners with resin or catalyst to
ensure an effective and consistent sealing surface for your finishing operation.
Vacuum Tank:
When you need to remove entrapped air from material for precision mixing, Graco pressure tanks provide
a great degassing option to eliminate foam from your material to reduce surface defects and pitting.
3
Page 4
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Pots
2 Gallon (8 liter)
Pressure Pots
• ASME rated to ensure it meets factory standards
• High quality stainless steel design is compatible with
many materials
• Use in stand-alone spraying, material/catalyst supply,
or as a moisture sensitive material reservoir
Ordering Information
Models with Agitators Models without Agitators
Low Pressure (HVLP)
Height
Capacity
2 Gallon
(8 liter)
2 Gallon
(8 liter)
Part Number Description
236086 Bare tank (pot, lid, gasket only)
236676 Bottom outlet kit
15D058 Tank liner (Qty 20)
111381 Replacement C-Clamps
117572 Standard Santoprene gasket
117575 Premium PTFE coated gasket
236859 Agitator assembly
2 gal (8 l) tank has a direct-drive blade high-speed agitator.
New optional Gun Air Regulator Kit (235042) can be added to all the tanks above.
in (cm)
26.0 (66.0) 38 (17) 236156 236158
25.4 (64.5) 30 (14) 236155 236157
Weight
lb (kg)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
Low Pressure (HVLP)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
236158
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
Instruction manual 308370.
4
Page 5
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Pots
5 Gallon (19 liter)
Pressure Pots
• ASME rated to ensure it meets factory standards
• High quality stainless steel design is compatible with
many materials
• Use in stand-alone spraying, material/catalyst supply,
or as a moisture sensitive material reservoir
Ordering Information
Low Pressure (HVLP)
Height
Capacity
5 Gallon
(19 liter)
5 Gallon
(19 liter)
Part Number Description
236087 Bare tank (pot, lid, gasket only)
244147 Supply tank (pot, lid, gasket, plugs, fill
236677 Bottom outlet kit
15D059 Tank liner (Qty 20)
186517 Stainless steel paddle kit
117571 Standard Santoprene gasket
117574 Premium PTFE coated gasket
236661 Agitator assembly
in (cm)
30.5 (77.5) 74 (34) 236146 236152
30.5 (77.5) 65 (30) 236143 236149
port cap, pick-up tube, liner)
Weight
lb (kg)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
236152
236149
Models with Agitators Models without Agitators
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
Low Pressure (HVLP)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
New optional Gun Air Regulator Kit (235042) can be added to all the tanks above.
All 5, 10 and 15 gal (19, 38, 57 l) pressure tanks with agitators feature heavy-duty back-geared models.
Instruction manual 308369.
5
Page 6
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Pots
10 Gallon (38 liter)
Pressure Pots
• ASME rated to ensure it meets factory standards
• High quality stainless steel design is compatible with
many materials
• Use in stand-alone spraying, material/catalyst supply,
or as a moisture sensitive material reservoir
Ordering Information
Low Pressure (HVLP)
Height
Capacity
10 Gallon
(38 liter)
10 Gallon
(38 liter)
Part Number Description
236088 Bare tank (pot, lid, gasket only)
244148 Supply tank (pot, lid, gasket, plugs, fill
236677 Bottom outlet kit
15D060 Tank liner (Qty 20)
186517 Stainless steel paddle kit
117571 Standard Santoprene gasket
117574 Premium PTFE coated gasket
236662 Agitator assembly
in (cm)
33.9 (88.0) 85 (39) 236147 236153
33.9 (88.0) 76 (35) 236144 236150
port cap, pick-up tube, liner)
Weight
lb (kg)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
236153
Models with Agitators Models without Agitators
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
Low Pressure (HVLP)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
236150
New optional Gun Air Regulator Kit (235042) can be added to all the tanks above.
All 5, 10 and 15 gal (19, 38, 57 l) pressure tanks with agitators feature heavy-duty back-geared models.
Instruction manual 308369.
6
Page 7
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Pots
15 Gallon (57 liter)
Pressure Pots
• ASME rated to ensure it meets factory standards
• High quality stainless steel design is compatible with
many materials
• Use in stand-alone spraying, material/catalyst supply,
or as a moisture sensitive material reservoir
Ordering Information
Low Pressure (HVLP)
Height
Capacity
15 Gallon
(57 liter)
15 Gallon
(57 liter)
Part Number Description
236089 Bare tank (pot, lid, gasket only)
244149 Supply tank (pot, lid, gasket, plugs, fill
236677 Bottom outlet kit
15D060 Tank liner (Qty 20)
15D061 Tank liner (Qty 8)
186517 Stainless steel paddle kit
117571 Standard Santoprene gasket
117574 Premium PTFE coated gasket
236663 Agitator assembly
in (cm)
44.6 (113.2) 101 (46) 236148 236154
44.6 (113.2) 92 (42) 236145 236151
port cap, pick-up tube, liner)
Weight
lb (kg)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
236154
Models with Agitators Models without Agitators
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
Low Pressure (HVLP)
Regulated to 15 psi
(1.05 bar, 0.105 MPa)
High Pressure
Regulated to 100 psi
(7 bar, 0.7 MPa)
236151
New optional Gun Air Regulator Kit (235042) can be added to all the tanks above.
All 5, 10 and 15 gal (19, 38, 57 l) pressure tanks with agitators feature heavy-duty back-geared models.
Instruction manual 308369.
7
Page 8
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Pots
2.5 Gallon (9.5 liter) Aluminum
Pressure Pots
• Painted aluminum tank ideal for adhesives or other coatings
• Single or dual regulator options for pulsation-free fluid delivery
• Built-in handle for easy movement
Ordering Information
Tank
Part No. Description
171226 2-1/2 Gallon
Pressure Pot
223833 2-1/2 Gallon
Pressure Pot with
Dual Regulators
Instruction manual: 307133
Capacity
2.5 gal
(9.5 l)
2.5 gal
(9.5 l)
Max. Working
Pressure
50 psi (3.5 bar,
0.35 MPa)
50 psi (3.5 bar,
0.35 MPa)
Relief Valve
Setting
50 psi (3.5 bar,
0.35 MPa)
50 psi (3.5 bar,
0.35 MPa)
Fluid
Inlet
1⁄4
npt(m)
1⁄4
npt(m)
Fluid
Outlet Wetted Parts Air Inlet
3⁄8
npsm(m)
3⁄8
npsm(m)
Aluminum, brass,
steel, buna-N
Aluminum, brass,
steel, buna-N
1⁄4 npt(m) 21 x 11-1/4
1⁄4 npt(m) 21 x 11-1/4
223833
Size (H x W)
in (cm)
(53 x 286
(53 x 286
8
Page 9
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Pots
Tank Liners
Pressure Pots
• Tough anti-static material resists cuts and tears for
safe and clean handling
• Reduce cleaning time and keep materials segregated
• Reduce changeover time between jobs
Ordering Information
Part No. Description
15D058 20 count, 2 gal (9 l) pressure tank liners
15D059 20 count, 5 gal (19 l) pressure tank liners
15D060 20 count, 10 gal (45 l) pressure tank liners
15D061 8 count, 15 gal (56 l) pressure tank liners
112077 5 count, 2.5 gal (11 l) pressure tank liners
112078 25 count, 2.5 gal (11 l) pressure tank liners
9
Page 10
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Mixing is step one!
If the material is not properly mixed, it will never reach optimal performance conditions
despite the highest quality pumping, proportioning, and spray guns.
Graco offers a complete line of high quality mixing solutions for many
different materials and containers. Our Agitator Speed Controller
ensures that your mixing process can be controlled to eliminate paint
shear, foaming, and unnecessary compressed air consumption.
Our mixing equipment will make sure you are set up for success
starting with step one.
10
Page 11
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Flange Mounted Agitators
for Drum and Mix Tank
Drum Agitators
• Agitators mount directly to mix tank or drum covers
• Dual propeller ensures efficient and thorough mixing
• Easy adjustment knob for fine tuning agitator speed
to ideal mixing parameters
207199
Ordering Information
Length
Part No. Description Drive HP
206758 Dual round prop;
mounts on cover
207199 Includes 206758 and
55 gallon (210 liter) cover
2 in NPSM bung
203711 Mounts on 237307 SST cover;
agitator supports mount to suction
tube or pump cylinder
204995 Mounts on 237307 cover; mounts to
suction tube or pump cylinder
206219 Mounts on 237308 cover Air 1/2 31.25 (79.3) CS
207953 Dual round prop
(3 blade each)
222698* Includes single round
prop
206760 Dual round prop Air 1.5 33.25 (84.4) CS,
205715 For mastics Air 2-1/2 33.50 (85) CS 307277
210068* With sawblade prop Air 3/4 33.87 (86) SST 307154
Air 1/2 31.25 (79.3) CS 306840
Air 1/2 31.25 (79.3) CS
Air 1/2 31.25 (79.3) CS 306459
Air 1/2 31.25 (79.3) CS 306459
Air 3/4 29 (73.6) CS 306840
Air 1/2 31.25 (79.3) SST 306840
in (cm) Material Manual
306938
(SST cover)
306459
(SST cover)
306840
Aluminum
* Waterborne compatible
Part Number Description
190192 Agitator cover gasket
11
Page 12
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Clamp Mounted Agitators
Drum Agitators
• Clamp mounts agitator directly to drum
• Adjustable shaft angle to reduce mixing vortex and
air entrapment
• Dual propeller ensures efficient and thorough mixing
• Easy adjustment knob for fine tuning agitator speed
to ideal mixing parameters
(except
225883)
225831
Ordering Information
Part No. Description Drive HP
225883 Includes dual round
225831 Includes dual round
prop; open drum
prop; open drum
Length
in (cm) Material Manual
Air 2-1/2 41.5
(105.4)
Air 1 41.5
(105.4)
CS, Iron,
Aluminum
CS, Aluminum,
Ductile Iron,
Bronze
306426
306358
12
Page 13
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Expanding Blade Agitators
Drum Agitators
• Corrosion resistant materials
• Threads into 1.5” or 2” drum bung
• Includes angled adapter reduces vortexing and
allows for off center mounting
• Customize configuration by adjusting blade height
or by adding additional blade assemblies
• Collapsible blades fit through drum bung and
expand when spinning for efficient mixing
Ordering Information
Part No. Description Drive HP
24C728 Low Viscosity (1,000 cps) air driven
expanding blade bung-mounted
agitator
24C729 High Viscosity (2,000 cps) air driven
expanding blade bung-mounted
agitator
Air 1 100 (7) 500 rpm 303, 18-8
Air 1.75 100 (7) 500 rpm 303, 18-8
Max. Air Input
psi (bar)
Max. Speed
Recommended
24C728
Wetted
Parts
and 304 SST
and 304 SST
Instruction manual: 313643
13
Page 14
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Twistork® Agitators
Drum Agitators
• Helix blade effectively mixes higher viscosity materials
• Mounts directly to 2 inch drum bung
• Stainless and carbon steel material options
• Siphon model allows material transfer though agitator shaft
• Sealed agitator drive prevents material contamination
and evaporation
• ATEX approval for hazardous locations
• Max viscosity 10,000 cps
Ordering Information
Length
Part No. Description Drive HP
224854 Twistork, reversible, non-siphon Air 1-1⁄2 37.25 (95) CS 308175
235534 Twistork, reversible, non-siphon Air 1-1⁄2 37.25 (95) 304 SST 308175
236629* Twistork, standard siphon model Air 3⁄4 47.5* (121) 304 SST 308345
236760 Oil-less, reversible, siphon model Air 3/4 47.5* (121) 304 SST 308345
in (cm) Material Manual
236629
*Adjustable depth models for drums 31-1⁄2 in to 35-1⁄2 in (80 cm to 90.1 cm) deep.
Siphon tube designed to rest on drum bottom.
14
Page 15
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Heavy Duty In-Drum Back-Geared Agitator
Drum Agitators
• Corrosion resistant materials for high quality and long life
• Leak-free gearbox eliminates material contamination common
with oil filled units
• Installs easily onto in-drum agitators
• Mounts directly to drum bung, choose 1.5 in or 2 in
• Includes 3/8 in, 7/16 in, ½ in, 5/8 in shaft adapters, compatible
with several styles
• ATEX approval for hazardous locations
Ordering Information
Part No. Description
24C293 1.5 inch Bung Model
Includes heavy duty agitator drive, plus
2 adapters for 4 different shaft sizes
(3/8, 7/16, 1/2 and 5/8 inch)
24C522 2 inch Bung Model
Includes heavy duty agitator drive, plus
2 adapters for 4 different square drive
sizes (3/8, 7/16, 1/2 and 5/8 inch)
16A521 1.5 inch bung adapter
16A754 2 inch bung adapter
16H554 3/8 inch and 7/16 inch shaft adapter
16H555 1/2 inch and 5/8 inch shaft adapter
* Waterborne compatible
Gear Reducer
Ratio
24:1 100 (7) 100 rpm 303 SST
24:1 100 (7) 100 rpm 303 SST
Max. Air Input
psi (bar)
Max. Speed
Recommended
24C293
Wetted
Parts
Instruction manual: 308609
15
Page 16
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Heavy Duty
Drum Agitator
Elevators
• Heavy duty gearbox mixes high viscosity materials
• Leak-free and oil-less gearbox prevents material contamination
• Stainless steel agitator and cover for corrosion resistance and
waterborne compatibility
• Twin paddles thoroughly mix finishing materials
• Siphon option allows material transfer through agitator shaft
• Access port for easy sampling and inspection of material
during operation
• Maximum viscosity 3,000 cps
Ordering Information
Length
Part No. Descripiton Drive HP
• 231414 Heavy-duty back-geared agitator with
elevator, drum cover and siphon kit
• 231413 Same as 231414, except without
siphon capability
• 238157 Heavy-duty back-geared agitator Air 1/2 32 (81.25) SST 308609
• 240209 Same as 238157 with siphon kit Air 1/2 32 (81.25) SST 308609
• 238250 Siphon tube kit; fits 238157 agitator
3/4" ID and 1" npt(m) thread
• 191920 Shaft extension; fits 238157 agitator.
Do not use with siphon kit 238250
• 191606 Shaft extension; fits 238157 agitator.
Do not use with siphon kit 238250
Air 1/2 32 (81.25) SST 308609
Air 1/2 32 (81.25) SST 308609
inches (cm) Material Manual
43 (109) SST 308609
7 (17.8) SST 308609
16 (40.6) SST 308609
231414
• Waterborne compatible
Part Number Description
238283 Drum cover for agitator 238157
Includes inspection port, return port and
mounting holes for agitator.
16
Page 17
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Agitator Speed Controller
Drum Agitators
• Provides closed-loop speed control for agitators
• Maintains constant set speed even as viscosity
or drum levels change
• Installs within minutes
• Prevents over-agitation of shear sensitive materials
and foaming of waterborne materials
• Extends agitator lifetime by eliminating agitator over speeding
• Lowers energy costs by reducing air consumption
Ordering Information
Part No. Description
24G621 Agitator Speed Controller
Compatible Graco Agitators
24C821, 24C524, 24C520, 240209,
231414, 222698, 207199, 204995,
24C729, 24C523, 24C519, 238157,
231413, 210068, 206760, 204482,
24C728, 24C522, 24C293, 236629,
225831, 210067, 206758, 203711
Compatible Graco Air Motors
101140, 16A871, 101388, 111310
Instruction manual: 3A1315
24G621
17
Page 18
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Replacement Air Motors
Drum Agitators
• Replacement air motors will give new life your existing agitators
• Use the chart below to determine compatibility
• Easy to select and install
101140
Ordering Information
Air Motor
Part No.
101140 207335 203711, 204482, 204995, 206219, 206758,
162425 207335 236146, 236147, 236148, 236152, 236153,
111310 224954 224854, 235534, 24C729
101687 207337 224571, 224572
101388 207336 206706, 225831
Repair Kit
Part No.
Compatible Agitator
Part No.
207953, 210067, 210068, 222698, 236097,
236629, 238157, 238859, 238860, 240209,
962947, 24C293, 24C522
236154, 236661, 236662, 236663
18
Page 19
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Pail Cover Agitator
Pail Agitators
• Lift handles for easy moving and color changes
• Locking bolts to secure cover and reduce spills
• Ideal for wall mount pumps or spray packages
Ordering Information
Length
Part No. Size Description Drive HP
• 222695 5 gal (18 l) Round prop Air 1⁄4 13.25
• 204536 5 gal (18 l) Round prop (3 blade) Air 1⁄4 13.25
226086 5 gal (18 l) Pail cover, round prop Air 1/4 13.25
243340 5 gal (18 l) SST pail cover with
SST agitator
245081 5 gal (18 l) SST pail agitator kit
for Triton pkgs
245895 5 gal (18 l) CS pail cover with
SST agitator
• 224572 10 gal (37 l) Single round prop
(3 blade)
Air 1⁄4 13.25
Air 1/2 13.25
Air 1/4 13.25
Air 1/4 17.25
in (cm) Material Manual Notes
(33.6)
(33.6)
(33.6)
(33.6)
(33.6)
(33.6)
(43.8)
243340
224572
226086
SST 307968 224571 Agitator and hose
SST 306565 224571 Agitator and metal tube
CS 306670 224571 Agitator and CS pail cover
SST 306565 224571 Agitator and SST pail cover
SST 309305
CS 306565
SST 306565
• Waterborne compatible
19
Page 20
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Heavy Duty Pressure Tank Agitators
Tank Agitators
• 20:1 gear reduction to mix high viscosity
materials, even at low speeds
• Sealed agitator shaft to prevent air leakage
and contamination
• Built-in baffle and support for efficient mixing
• Compatible with Graco pressure tanks
Ordering Information
Length
Part No. Description Drive HP
• 236661 5 gallon (19 liter), gear reduced Air 1⁄2 15 (38) 304/316 SST 308371
• 236662 10 gallon (38 liter), gear reduced Air 1⁄2 20.75 (53) 304/316 SST 308371
• 236663 15 gallon (57 liter), gear reduced Air 1⁄2 31 (79) 304/316 SST 308371
• Waterborne compatible
*Only use on Graco’s 5, 10 and 15 gal ASME pressure tanks.
Part Number Description
186517 304 SST Paddle Kit for 5, 10, 15 gallon (18.9, 38, 57 l) sizes
Used to upgrade from standard composite agitator paddle to
stainless steel construction, for enhanced chemical resistance.
in (cm) Material Manual
236661
20
Page 21
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Electric Agitators
Electric Agitators
• Low shear mixing ensures uniform particle dispersion
without material degradation
• Compatible with waterborne and solventborne materials
• Sealed gearbox eliminates maintenance
• Lubrication-free shaft seal prevents solvent attack of
agitator bearings and gearbox
• Efficient motor provides superior mixing performance
with less energy consumption
• Inverted duty motor for variable speed adjustment via
variable frequency drive (VFD)
Motor Specifications
LSA 200 System
Electric-Powered
Motor
Gear Reduction 5:1
Power 0.25 HP
Speed 1750 rpm
Output 350 rpm
Electrical 230/460 volt
Electrical consumption
at 460 volt
Construction:
Shaft and impeller
Mounting plate
Shaft Diameter 16 mm
Height
Weight
3 phase, Class 1 Group D
Explosion-proof
0.58 amps
316 SST
electroless nickel plating
LSA 220 System
Electric-Powered
Motor
Gear Reduction 6:3:1
Power 0.25 HP
Speed 1750 rpm
Output 280 rpm
Electrical 230/460 volt
Electrical consumption
at 460 volt
Construction:
Shaft and impeller
Mounting plate
Shaft Diameter 16 mm
Height
Weight
3 phase, Class 1 Group D
Explosion-proof
0.58 amps
316 SST
electroless nickel plating
Manual number 310500
LSA 300 System
Electric-Powered
Motor
Gear Reduction 6:3:1
Power 0.25 HP
Speed 900 rpm
Output 140 rpm
Electrical 230/460 volt
Electrical consumption
at 460 volt
Construction:
Shaft and impeller
Mounting plate
Shaft Diameter 20 mm
Height
Weight
3 phase, Class 1 Group D
Explosion-proof
0.58 amps
316 SST
electroless nickel plating
Mounting Specifications
Bolt Pattern
6.25 in. (159 mm)
diameter
9/16 in. bolt holes
.5625 in. (14.3 mm)
diameter
2.5 in. (63.5 mm)
diameter
Electric Agitators section
continues on next 3 pages
21
Page 22
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Electric Agitators
Order your Electric Agitator in 3 Easy Steps!
STEP
1
STEP
2
Sizing Guide
Use volume and viscosity to determine model and blade diameter.
LSA 200 LSA 220 LSA 300
Tank
Volume
40 - 120 Gal
(150 - 400 l)
120 - 160 Gal
(450 - 600 l)
160 - 200 Gal
(600 - 750 l)
Fluid
Viscosity
(cps)
<100
100 - 200
200 - 350
<100
100 - 200
<100 10.0 in (254 mm)
Recommended
Blade Diameter
7.6 in (193 mm)
8.8 in (224 mm)
10.0 in (254 mm)
8.8 in (224 mm)
10.0 in (254 mm)
Tank
Volume
130 - 160 Gal
(490 - 600 l)
160 - 200 Gal
(600 - 750 l)
200 - 300 Gal
(750 - 1100 l)
Fluid
Viscosity
(cps)
<100
100 - 200
200 - 350
<100
100 - 200
<100 12.8 in (325 mm)
Recommended
Blade Diameter
10.0 in (254 mm)
11.2 in (284 mm)
11.8 in (299 mm)
11.2 in (284 mm)
11.8 in (299 mm)
Tank
Volume
200 - 300 Gal
(750 - 1100 l)
300 - 400 Gal
(1100 - 1500 l)
400 - 500 Gal
(1500 - 1900 l)
Tank Dimensions
Use tank dimension diagrams and blade diameter to determine shaft length.
If Z/T exceeds 1.2, consider using dual impellers.
Fluid
Viscosity
(cps)
<100
100 - 200
200 - 350
<100
100 - 200
<100 19.0 in (483 mm)
Recommended
Blade Diameter
15.6 in (396 mm)
17.0 in (432 mm)
18.0 in (457 mm)
18.0 in (457 mm)
19.0 in (483 mm)
L
H
T
1.5 D MIN
Z
D
MAX
MIN
1.5 D
0.5 D
1.5 D MIN
L
1.5 D
L = H – (0.5 D)
T
H
Z
MAX
MIN
0.5 D
D
L = H – (0.5 D)
Electric Agitators section
continues on next 2 pages
22
Page 23
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Electric Agitators
STEP
Ordering Information
Select your part number Based on your model, blade diameter and shaft length.
3
Assembly
Number
922000 200E 516556 29 737 516910 7.6 193 515770
922005 200E 516556 30 762 516911 7.6 193 515770
922203 200E 516556 31 787 516912 7.6 193 515770
922016 200E 516556 32 813 516913 7.6 193 515770
922022 200E 516556 33 838 516914 7.6 193 515770
922025 200E 516556 34 864 516915 7.6 193 515770
922028 200E 516556 35 889 516916 7.6 193 515770
922032 200E 516556 36 914 516917 7.6 193 515770
922198 200E 516556 29 737 516910 8.8 224 515771
922006 200E 516556 30 762 516911 8.8 224 515771
922010 200E 516556 31 787 516912 8.8 224 515771
922205 200E 516556 32 813 516913 8.8 224 515771
962686 200E 516556 33 838 516914 8.8 224 515771
922208 200E 516556 34 864 516915 8.8 224 515771
922029 200E 516556 35 889 516916 8.8 224 515771
922033 200E 516556 36 914 516917 8.8 224 515771
922001 200E 516556 29 737 516910 10 254 515772
922036 220E 516556 29 737 516910 10 254 515772
922200 200E 516556 30 762 516911 10 254 515772
962553 220E 516556 30 762 516911 10 254 515772
922011 200E 516556 31 787 516912 10 254 515772
922047 220E 516556 31 787 516912 10 254 515772
922017 200E 516556 32 813 516913 10 254 515772
922231 220E 516556 32 813 516913 10 254 515772
922023 200E 516556 33 838 516914 10 254 515772
922059 220E 516556 33 838 516914 10 254 515772
922209 200E 516556 34 864 516915 10 254 515772
962764 220E 516556 34 864 516915 10 254 515772
922210 200E 516556 35 889 516916 10 254 515772
962841 220E 516556 35 889 516916 10 254 515772
922253 220E 516556 36 914 516917 10 254 515772
922002 200E 516556 29 737 516910 11.2 284 515773
922037 220E 516556 29 737 516910 11.2 284 515773
922007 200E 516556 30 762 516911 11.2 284 515773
922043 220E 516556 30 762 516911 11.2 284 515773
922012 200E 516556 31 787 516912 11.2 284 515773
922048 220E 516556 31 787 516912 11.2 284 515773
922206 200E 516556 32 813 516913 11.2 284 515773
962674 220E 516556 33 838 516914 11.2 284 515773
922243 220E 516556 34 864 516915 11.2 284 515773
922249 220E 516556 35 889 516916 11.2 284 515773
962642 220E 516556 36 914 516917 11.2 284 515773
922213 220E 516556 29 737 516910 11.8 300 515774
922219 220E 516556 30 762 516911 11.8 300 515774
922225 220E 516556 31 787 516912 11.8 300 515774
922232 220E 516556 32 813 516913 11.8 300 515774
922238 220E 516556 33 838 516914 11.8 300 515774
922244 220E 516556 34 864 516915 11.8 300 515774
922250 220E 516556 35 889 516916 11.8 300 515774
922254 220E 516556 36 914 516917 11.8 300 515774
922214 220E 516556 29 737 516910 12.8 325 515775
922220 220E 516556 30 762 516911 12.8 325 515775
922226 220E 516556 31 787 516912 12.8 325 515775
922233 220E 516556 32 813 516913 12.8 325 515775
922239 220E 516556 33 838 516914 12.8 325 515775
922245 220E 516556 34 864 516915 12.8 325 515775
922215 220E 516556 29 737 516910 13.6 345 515776
922221 220E 516556 30 762 516911 13.6 345 515776
922227 220E 516556 31 787 516912 13.6 345 515776
922234 220E 516556 32 813 516913 13.6 345 515776
922080 300E 516558 34 864 516915 15.1 384 51A018
922085 300E 516558 34 864 516915 15.1 384 51A018
922090 300E 516558 35 889 516916 15.1 384 51A018
Agitator
Model
Motor
P/N
Shaft Length “L”
Shaft
P/N
Blade Dia "D"
Blade
P/Nin mm in mm
L
D
Electric Agitators section
continues on next page
23
Page 24
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Electric Agitators
Ordering Information (continued)
Select your part number Based on your model, blade diameter and shaft length.
Assembly
Number
962742 300E 516558 36 914 516920 15.1 384 51A018
922107 300E 516558 37 940 516921 15.1 384 51A018
922116 300E 516558 38 965 516922 15.1 384 51A018
922126 300E 516558 39 991 516923 15.1 384 51A018
922135 300E 516558 40 1016 516924 15.1 384 51A018
922145 300E 516558 41 1041 516925 15.1 384 51A018
96A272 300E 516558 42 1067 516926 15.1 384 51A018
962795 300E 516558 43 1092 516927 15.1 384 51A018
922169 300E 516558 44 1118 516928 15.1 384 51A018
922179 300E 516558 45 1143 516929 15.1 384 51A018
962828 300E 516558 46 1168 516930 15.1 384 51A018
922081 300E 516558 34 864 516915 15.6 396 515777
922091 300E 516558 35 889 516916 15.6 396 515777
922100 300E 516558 36 914 516920 15.6 396 515777
962715 300E 516558 37 940 516921 15.6 396 515777
922117 300E 516558 38 965 516922 15.6 396 515777
922127 300E 516558 39 991 516923 15.6 396 515777
922136 300E 516558 40 1016 516924 15.6 396 515777
922146 300E 516558 41 1041 516925 15.6 396 515777
962730 300E 516558 42 1067 516926 15.6 396 515777
922161 300E 516558 43 1092 516927 15.6 396 515777
922170 300E 516558 44 1118 516928 15.6 396 515777
922180 300E 516558 45 1143 516929 15.6 396 515777
922189 300E 516558 46 1168 516930 15.6 396 515777
922082 300E 516558 34 864 516915 17 432 515778
922092 300E 516558 35 889 516916 17 432 515778
962568 300E 516558 36 914 516920 17 432 515778
922108 300E 516558 37 940 516921 17 432 515778
922118 300E 516558 38 965 516922 17 432 515778
922128 300E 516558 39 991 516923 17 432 515778
922137 300E 516558 40 1016 516924 17 432 515778
922147 300E 516558 41 1041 516925 17 432 515778
962731 300E 516558 42 1067 516926 17 432 515778
922162 300E 516558 43 1092 516927 17 432 515778
922171 300E 516558 44 1118 516928 17 432 515778
922181 300E 516558 45 1143 516929 17 432 515778
922190 300E 516558 46 1168 516930 17 432 515778
922083 300E 516558 34 864 516915 18 457 515779
922093 300E 516558 35 889 516916 18 457 515779
922101 300E 516558 36 914 516920 18 457 515779
922109 300E 516558 37 940 516921 18 457 515779
922119 300E 516558 38 965 516922 18 457 515779
922129 300E 516558 39 991 516923 18 457 515779
922138 300E 516558 40 1016 516924 18 457 515779
922148 300E 516558 41 1041 516925 18 457 515779
922155 300E 516558 42 1067 516926 18 457 515779
922163 300E 516558 43 1092 516927 18 457 515779
922172 300E 516558 44 1118 516928 18 457 515779
922182 300E 516558 45 1143 516929 18 457 515779
922191 300E 516558 46 1168 516930 18 457 515779
922084 300E 516558 34 864 516915 19 483 515780
922094 300E 516558 35 889 516916 19 483 515780
922102 300E 516558 36 914 516920 19 483 515780
922110 300E 516558 37 940 516921 19 483 515780
922120 300E 516558 38 965 516922 19 483 515780
922130 300E 516558 39 991 516923 19 483 515780
922139 300E 516558 40 1016 516924 19 483 515780
922149 300E 516558 41 1041 516925 19 483 515780
922156 300E 516558 42 1067 516926 19 483 515780
922164 300E 516558 43 1092 516927 19 483 515780
922173 300E 516558 44 1118 516928 19 483 515780
922183 300E 516558 45 1143 516929 19 483 515780
922192 300E 516558 46 1168 516930 19 483 515780
Agitator
Model
Motor
P/N
Shaft Length “L”
Shaft
P/N
Blade Dia "D"
Blade
P/Nin mm in mm
L
D
24
Page 25
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Drum Covers
237306
• Integrate pumps, agitators, and accessories with drum,
elevator system, and other containers
• Many mounting options and configurations
• Inspection port for clean and easy monitoring
• Stainless steel construction is compatible with catalyst,
waterborne, and other finishing materials
• Create custom solutions with bare cover (238008)
237307
Ordering Information
Part No. Graco Pump Support Features Material Manual
• 237306 President, Monark,
Standard and Fast-Flo
• 237307 President and Monark Includes inspection port plug, bolts, nuts, and gaskets.
• 237308 President (two bolt mounting) Includes inspection port plug, bolts, nuts, and gaskets.
• 237309 King, Bulldog, Senator,
and President
• 237949 Glutton Features inspection port plug, agitator port; return tube ports,
• 238008 Most Graco pumps except Premier Features only inspection port with plug. No other holes.
• 190206 Most Graco pumps except Premier Blank cover with no holes. Heavy duty 12 gauge SST.
• 238283 Fits agitator 238157 and
electric agitators
Includes inspection port plug, bolts, nuts, and gaskets.
Fits agitator 206758 and siphon tube 206266.
Fits agitators 204995 and 203711.
Fits agitators 204995, 206219 and filter 214724.
Includes inspection port plug, bolts, nuts, and gaskets.
Fits agitator 205715 and air regulator 207651 (King), and
air regulator 205712 (Bulldog).
Glutton bolt holes and siphon tube port.
Additional holes cut to fit particular application.
Not passivated.
Includes inspection port, return port and mounting holes
for agitator.
304 SST 308466
304 SST 308466
304 SST 308466
304 SST 308466
304 SST 308466
304 SST 308466
304 SST 308466
304 SST 308609
237307
237308
237309
238283
• Waterborne compatible
25
Page 26
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Agitators
Elevator Systems
• Safely and easily raise and lower cover mounted pumps
and agitators
• Includes lift, up/down air control, and cover support
(cover not included)
• Mounts directly to floor or plate (205339)
Ordering Information
Part No. Features Material Manual
237746 Includes elevator 204385, air control valve 237579,
floor mount base and drum cover support 237578.
204352 Includes elevator 204385 and bracket 204510. Steel 306568
204385 Elevator only with stationary base. Steel 306287
206276 Air control kit. Used with Bulldog or King pump mounted on a heavyduty elevator.
Includes air regulator with gauge restrictor valve, push-pull valve, air-assist valve, hose and
fitting for directing air to pump, elevator and inductor plate.
207561 Air control kits. Elevator up/down control 306287
237579 Air control kit similar to 206276; plus includes air tube and mounting bracket to locate push-
pull control on front edge of stainless steel drum cover.
204510 Wishbone support and controls for up/down. Used with Fire-Ball, Monark, President in-line
pump
237902 Bulldog, King Drum Cover Mount
Includes elevator 207408, pump support 237578, and air control kit 237579.
237525 Elevator Retrofit Kit
Designed to adapt elevators with old support ring to fit new SST drum covers 237306 thru
237310, 190206, 238008 and others. Drum support not included.
204490 Monark (224350) and President (224348). Includes elevator, inductor plate, pump bracket, up/
down control, air hose and steel base. Requires pump adapter 161251. Also requires
flange (160754).
205339 Elevator Base Plate
Provides stable surface if floor is too irregular for proper operation. Use with 207408 and
204385.
Steel 306287
306287
306568
Steel 306287
Steel 308467
Steel 306556
Steel 306556
237746
204352
26
Page 27
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
Air preparation is key to controlling the finishing process and prolonging the life of
finishing equipment. Graco offers a wide range of air preparation equipment to meet all
of your finishing needs. Our 3 stage desiccant or membrane drying system allows you to
provide dry, clean air to your entire finishing system to achieve a high quality finish.
We also have an extensive range of high quality filter-regulator-lubricators (FRLs) so
clean, lubricated air reaches your pneumatic equipment at the correct pressure –
regardless of system fluctuations. High quality compressed air is an important asset to
any finishing operation. Ensure you are utilizing compressed air to the fullest with Graco
Air Preparation Equipment.
27
Page 28
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
3-Stage Desiccant Drying System
Air Preparation Systems
• Ensures equipment is supplied with clean, dry air
• Multi-stage filter removes particles down to 0.01 micron
• Desiccant removes moisture from air
• Includes shut-off valve and pressure regulator
• Filter and desiccant indicators signal replacement to ensure
optimal efficiency
Ordering Information
Part No. Description Air Inlet Air Outlet
234401 3 stage system includes:
234402., 234403 and 234404
234402 Stage 1 -
Air filter with auto drain, removes water
and contaminants down to 5 microns.
234403 Stage 2 -
Coalescer with auto drain, removes oil and
sub-micronic particles down to .01 microns.
234404 Stage 3 -
Desiccant housing, removes uncondensed moisture
Part Number Description
288810 Replacement desiccant, 5 lb
288823 Replacement desiccant, 20 lb
1/2 in npt(f) 1/2 in npt(f) 108 CFM 175 psi
1/2 in npt(f) 1/2 npt(f) 35 CFM 175 psi
3/4 in reduced
to 1/2 in npt(f)
3/4 in reduced
to 1/2 in npt(f)
Air Flow
Capacity
30 CFM 175 psi
Max. Operating
Pressure
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
234401
Instruction manual: 309921
28
Page 29
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
3-Stage Membrane Drying System
Air Preparation Systems
• Membrane eliminates the cost and maintenance
of desiccant systems
• Ensures equipment is supplied with clean, dry air
• Multi-stage filter removes particles down to 0.01 micron
• Membrane removes moisture from air
234418
• Includes shut-off valve and pressure regulator
• Filter indicator signals replacement to ensure optimal efficiency
Ordering Information
Air Flow
Part No. Description Air Inlet Air Outlet
234418 3 stage systems includes
234406, 234397 and 118560
234406 Stage 1 -
Air filter with auto drain, removes
water and contaminants down to 5 microns
234397 Stage 2 -
Coalescer with auto drain, removes
oil and sub-micronic particles down to .01 microns
118560 Stage 3 -
Membrane air dryer, removes
uncondensed moisture
234394 Self-relieving air regulator 3/8" npt(f) 1/4" npt(f) 100 CFM 160 psi
U22695 Shut off valve
1/2" npt(f) 1/2" npt(f) 108 CFM 175 psi
1/2" npt(f) 1/2" npt(f) 70 CFM 175 psi
1/2" npt(f) 1/2" npt(f) 30 CFM 175 psi
Capacity
Max. Operating
Pressure
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
(1.2 MPa, 11 bar)
Instruction manual: 309920
29
Page 30
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
Air Control Unit
Air Preparation Systems
• Ensures equipment is supplied with clean, dry air
• Reusable filter removes particles down to 5 microns
• Includes shut-off valve and pressure regulator ideal for
controlling atomizing air for one or many spray guns
• Auto-drain eliminates manual emptying of filters
Ordering Information
Part No. Description
234398 Air control unit, filtered main
air outlet, two regulated outlets
(Filter 234396)
234399 Air control unit, filtered main air
outlet with gauge, two regulated outlets
(Filter 234396)
234400 Air control unit, filtered main air
outlet with gauge, three regulated outlets
(Filter 234396)
234411 Air control unit, filtered main air
outlet, two regulated outlets
(Filter 234410)
Instruction manual: 309923
234398 234400
Max. Air Inlet
Pressure Weight Max. CFM
160 psi
(1.1 MPa, 11 bar)
160 psi
(1.1 MPa, 11 bar)
160 psi
(1.1 MPa, 11 bar)
160 psi
(1.1 MPa, 11 bar)
5 lb 12 oz
(2.6 kg)
6 lb 4 oz
(2.8 kg)
7 lb 13 oz
(3.5 kg)
4 lb 13 oz
(2.2 kg)
120 CFM – Filter
50 CFM – Air Regulator
120 CFM – Filter
50 CFM – Air Regulator
120 CFM – Filter
50 CFM – Air Regulator
75 CFM – Filter
50 CFM – Air Regulator
30
Page 31
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
In-line Air Filters
and Coalescers
Air Preparation Systems
• Reusable filter removes particles down to 5 microns
• Coalescer removes contaminants down to 0.01 microns
• Auto-drain eliminates manual emptying of filters
• Built-in filters change indicator signals replacement
to ensure optimal efficiency
234408 234405 234409
Ordering Information
Part No. Description Air Inlet Air Outlet
234405 Air filter/coalescer assembly
(both with auto drain)
234406 Stage 1 - Air filter with auto drain
removes contaminants to 5 microns
234407 Stage 2 - Coalescer with auto drain
removes particles to 0.01 microns
234408 Air filter with auto drain
removes contaminants to 5 microns
234409 Coalescer with auto drain
removes particles to 0.01 microns
Instruction manual: 309919
1/2" npt (f) 1/2" npt (f) 70 CFM 175 psi
1/2" npt (f) 1/2" npt (f) 108 CFM 175 psi
1/2" npt (f) 1/2" npt (f) 70 CFM 175 psi
3/4" npt (f) 3/4" npt (f) 300 CFM 175 psi
3/4" npt (f) 3/4" npt (f) 115 CFM 175 psi
Air Flow
Capacity
Maximum Inlet
Pressure
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
31
Page 32
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
Low Pressure Air Regulators
Air Controls
• Accurate pressure regulation for consistent process control
• Lightweight design, ideal for use with spray guns
• Economical solution for air pressure regulation
234393 234390
Ordering Information
Max. Inlet
Part No. Description Inlet Outlet Handle
234389 Air regulator with gauge, self-relieving 1/4" npt (m) 1/4" npt (f) Knob 160 psi
234390 Mini-air regulator 1/4" npt (f) 1/4" npt (f) Knob 160 psi
234391 Air regulator, 2 regulated outlets and
1 non-regulated outlet
234392 Air regulator, 3 regulated outlets 3/8" npt (f) 1/4" npt (f) Te e 175 psi
234393 Air regulator 234391with gauge & shut-off
valve, 1 regulated outlet and 1 non-regulated
outlet, 0-160 psi (0-1.1MPa, 0-11 bar) gauge
234394 Air regulator 234392 with gauge & shut-off
valve, 2 regulated outlets, 0-160 psi
(0-1.1 MPa, 0-11 bar) gauge
3/8" npt (f) 1/4" npt (f) Te e 175 psi
3/8" npt (m) 1/4" npt (f) Te e 160 psi
3/8" npt (m) 1/4" npt (f) Te e 160 psi
Pressure Max. CFM
(1.1 MPa, 11 bar)
(1.1 MPa, 11 bar)
(1.2 MPa, 12 bar)
(1.2 MPa, 12 bar)
(1.1 MPa, 11 bar)
(1.1 MPa, 11 bar)
234392
22 CFM at 50 psi
(0.3 MPa, 3.5 bar)
22 CFM at 50 psi
(0.3 MPa, 3.5 bar)
50 CFM at 100 psi
(0.7 MPa, 7 bar)
50 CFM at 100 psi
(0.7 MPa, 7 bar)
50 CFM at 100 psi
(0.7 MPa, 7 bar)
50 CFM at 100 psi
(0.7 MPa, 7 bar)
Instruction manual 309924.
32
Page 33
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
Air Control System
Air Controls
• Several outlet options for multiple guns in
compact package.
• Adjustable pressure ranges for multiple
applications with one easy booth control.
• Ideal for supplying clean air to air spray
guns and applicators.
• High quality valves and regulators ensure
long life and accurate control.
Ordering Information
Part No. Inlet npt Outlet npt(m) Manual
217075 1/2 (f) Two 1/4 regulated or
Two 1/4 unregulated
307476
217075
33
Page 34
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
FRL Filter, Regulator, Lubricator
Air Controls
• Cleans, dries, and lubricates air supply to protect and maintain
pneumatic equipment
• Includes air filter, regulator, pressure gauge, lubricator, mounting
brackets, and fittings
• Ideal for pneumatic pumps like Glutton, President, etc.
• Visual indicator for adjusting lubrication amount
Ordering Information
Inlet/
Part No.
222345 1⁄2(f) 250
Outlet
Max. WPR
17.2 1.72 Zinc 15.8 x 13 x 5.0
Wetted
Parts
Size (w x h x d)
in (cm)psi bar MPa
(40 x 33 x 12.7)
Air Filters
• Centrifugal filter element removes contaminants and water
• Visual indicator for viewing filter contents
Ordering Information
Max. WPR Max CFM
Inlet/
Part No.
106150 3⁄4(fxf) 250
112859 1(fxf) 250
217074 1⁄2(fxf) 250
106148 3/8(fxf) 250 17.2 1.72 77 (2.2) 20 Zinc-plated 2.5 x 6.0 x 3.1
106149 1/2(fxf) 250 17.2 1.72 106 (3.0) 20 Zinc-plated 3.3 x 6.8 x 6.3
Outlet
17.2 1.72 250 (7.0) 40 Zinc-plated 4.0 x 8.8 x 7.8
17.2 1.72 350 (10.0) 40 Zinc-plated 4.5 x 8.8 x 7.9
17.2 1.72 106 (3.0) 40 Zinc-plated 3.0 x 7.5 x 6.6
at 100 psi
(m3/min)
Micron
Element Material
106150
Size (w x h x d)
in (cm)psi bar MPa
(10 x 22 x 20)
(12 x 22 x 20)
(7.6 x 19 x 17)
(6.4 x 15 x 7.9
(8.3 x 17 x 16)
34
Page 35
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Air Preparation and Controls
Lubricators
• Lubricator automatically adds lubricant to air line
• Control know adjusts lubrication amount
• Sight window for viewing and adjusting droplet size
Ordering Information
Max. WPR
Inlet/
Part No.
214848 1⁄2(f) 250 17.2 1.72 Zinc 3.3 x 7.9
214849 3⁄4(f) 250 17.2 1.72 Zinc 4.0 x 9.9
Outlet
Material
Size (w x h x d)
in (cm) Bowl Capacitypsi bar MPa
(8.3 x 20)
(10.3 x 25.1)
8 oz (0.24 l)
16 oz (0.5 l)
214848
Air Regulators
• Multiple outlets for connecting equipment, gauges, or ball valves
• Accurate adjustment of air pressure for process control
110318 104266
Ordering Information
Regulated Pressure Max CFM
Bare
Part No.
104266
171937 1⁄2(f) 1⁄4(f) 0-250 0-17.2 0-1.72 90 (2.5) Zinc-plated
104815 1⁄8(f) 1⁄8(f) 0-60 0-4.1 0-0.41 15 (0.4) Zinc-plated
110318
110341 1/8(f) 1/8(f) 0-125 0-8.6 0-0.86 39 (1.1) Zinc-plated
111804 1/4(f) 1/8(f) 0-125 0-8.6 0-0.86 39 (1.1) Zinc-plated
104267
171937 1/2(f) 1/4(f) 0-125 0-8.6 0-0.86 90 (2.5) Zinc-plated
Assembly
Part No.
203716
202858
202156
223815
110147
206237
Inlet/
Outlet
1⁄2(f)
1⁄2 90° swivel(f) x 3⁄8(m)
1⁄2 swivel(f) x 3⁄8(f)
1⁄2 x 3⁄8 bushing, gauge
1⁄2 swivel, ball valve, gauge
(also order nipple 162505)
1⁄4(f)
1⁄4(f)
1/2(f)
1/2 npsm(f) x 3/8 ball valve(m)
Gauge Ports
(npt)
1⁄4(f) 0-250 0-17.2 0-1.72 90 (2.5) Zinc-plated
1⁄8(f) 0-180 0-12.4 0-1.24 15 (0.4) Zinc-plated
1/4(f) 0-125 0-8.6 0-0.86 90 (2.5) Zinc-plated
at 100 psi
(m3/min) Materialpsi bar MPa
35
Page 36
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Precise fluid control is crucial to any finishing process. Graco has a proven line of fluid
pressure regulators to meet all of your finishing needs. Our experience provides us unique
insight in to the ideal fluid pressure regulator for a wide array of finishing applications
and materials.
Fluid Regulator
Fluid pressure regulators control pressure of the downstream fluid, allowing operators to accurately
control the pressure to guns, applicators and dispense valves. This ensures the process is stable and
maintains the optimal conditions needed for a smooth paint finish, consistent extrusion or steady flow.
Graco fluid regulators are designed with wear resistant materials for long life, even when using harsh
materials. With decades of experience and continuous improvement, Graco has created some of the most
reliable, high performance regulators in the industry.
Back Pressure Regulator
Control upstream fluid pressure with Graco back pressure regulators. Our back pressure regulators
use closed loop control to maintain the pressure of the system regardless of flow demand. This allows
operators to trigger guns, valves, and other flow controls without changing the system pressure.
36
Page 37
Finishing Accessories
Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators Product Matrix
Part
Number
24E472 1-30 (0.06-2.0) SST Air
24E471 1-50 (0.06-3.4) SST Air
24C375 1-90 (0.06-6.2) SST Air
236449 100 (7) 3-30 (0.2-2) 0.5 (1.9) Acetal Manual
241976 100 (7) 3-30 (0.2-2) 0.5 (1.9) Acetal Manual
236281 100 (7) 3-100 (0.2-7) 0.5 (1.9) Acetal Air
236216 100 (7) 20-100 (1-7) 0.5 (1.9) Acetal Manual
236450 100 (7) 20-100 (1-7) 0.5 (1.9) Acetal Manual
214980 250 (17.5) 0-30 (0-2) 3.0 (11.3) SST Air
214895 250 (17.5) 5-100 (0-7) 3.0 (11.3) SST Manual
214706 250 (17.5) 5-100 (0-7) 3.0 (11.3) SST Manual
222115 250 (17.5) 20-160 (1-11) 3.0 (11.3) SST Manual
217314 250 (17.5) 20-160 (1-11) 3.0 (11.3) SST Manual
Low Pressure 0-160 psi (0-11 bar)
High Pressure 150-5000 psi (10-344 bar)
221118 250 (17.5) 20-160 (1-11) 3.0 (11.3) SST Manual
830351 250 (17.5) 3-100 (0.2-7) 3.0 (11.3) SS Air
830352 250 (17.5) 3-100 (0.2-7) 3.0 (11.3) SS Air
830353 250 (17.5) 3-100 (0.2-7) 3.0 (11.3) SS Air
234272 580 (40) 6-145 (0.4-10) 7.0 (26.4) SS Air
234256 580 (40) 6-145 (0.4-10) 7.0 (26.4) SS Air
234273 580 (40) 15-145 (1-10) 7.0 (26.4) SS Spring
234263 580 (40) 15-290 (1-20) 7.0 (26.4) SS Spring
234267 1015 (70) 145-725 (10-50) 9.8 (37) SS Spring
222121 1500 (103) 150-1200 (10-83) 1.0 (3.7) SST Manual
240197 1500 (103) 150-1200 (10-83) 1.0 (3.7) SST Manual
240198 1500 (103) 150-1200 (10-83) 1.0 (3.7) SST Manual
217576 3000 (206) 200-1000 (13-69 3.5 (13.2) CS Manual
206661 3000 (206) 1000-3000 (69-206) 3.5 (13.2) CS Manual
238889 6000 (413) 500-3000 (34-206) 1.0 (3.7) SST Manual
238890 6000 (413) 500-3000 (34-206) 1.0 (3.7) SST Manual
238893 6000 (413) 500-4000 (34-275) 1.0 (3.7) SST Air
238894 6000 (413) 500-4000 (34-275) 1.0 (3.7) SST Air
238891 6000 (413) 3000-5000 (206-344) 1.0 (3.7) SST Manual
238892 6000 (413) 3000-5000 (206-344) 1.0 (3.7) SST Manual
Max Pressure
psi (bar)
Regulated Pressure
psi (bar)
Max Delivery
gpm (lpm) Wetted Parts Type
Inlet/
Outlet
1/4 M
1/4 F
1/4 M
1/4 F
1/4 M
1/4 F
1/4 F
1/4 F
1/4 F
1/4 F
1/4 F
1/4 M
1/4 F
1/4 F
1/4 F
1/4 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
1/4 F
3/8 F
1/4 F
3/8 F
1/4 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
1/4 F
1/4 F
1/4 F
1/4 F
1/4 F
1/4 F
3/8 F
1/4 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
1-1/4 F
1-1/4 F
Gauge
Port
1/4 F Ye s
1/4 F No
1/4 F Ye s
1/4 F Ye s
1/4 F Ye s
1/4 F No
1/4 F No
1/4 F Ye s
1/4 F Ye s
1/4 F Ye s
1/4 F Ye s
None No
None No
None No
1/8 BSPP No
1/8 BSPP No
1/8 BSPP No
1/8 BSPP No
1/8 BSPP No
- No
1/4 F Ye s
1/4 F Ye s
1/4 F Ye s
1/4 F No
1/4 F Ye s
1/4 F No
1/4 F Ye s
1/4 F No
1/4 F Ye s
1/4 F Ye s
Includes
Gauge
37
Page 38
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators Product Matrix
Part
Number
234266 5000 (344) 70-900 (5-62) 11.3 (42.7) SS Air
234270 5000 (344) 300-2000 (20-138) 11.7 (44.2) SS Air
234271 5000 (344) 600-4600 (41-317) 12.3 (46.5) SS Air
234259 5000 (344) 600-3600 (41-248) 10.6 (40.1) SS Air
234260 2600 (179) 600-1500 (41-103) 8.1 (30.6) SS Spring
234264 6000 (413) 1300-3000 (90-206) 8.2 (31.0) SS Spring
High Pressure 150-5000 psi (10-344 bar)
Back Pressure 0-250 psi (0-17 bar)
234265 6000 (413) 1300-4000 (90-275) 9.2 (34.8) SS Spring
208997 180 (12) 0-180 (0-12) 15 (56.7) SST Manual
916154 180 (12) 0-180 (0-12) 15 (56.7) SST, Carbide Manual
903508 180 (12) 0-180 (0-12) 15 (56.7) SST Manual
205122 180 (12) 0-180 (0-12) 2.0 (7.5) CS Manual
237503 180 (12) 5-180 (0-12) 4.3 (16.2) SST Manual
236770 180 (12) 5-180 (0-12) 4.3 (16.2) SST Manual
206019 180 (12) 0-180 (0-12) 15.0 (56.7) Aluminum Manual
224486 300 (20.7) 5-180 (0.3-12) 20 (75) SST, Acetal and PTFE Manual 1-1/2 F 1/4 npt(f) Ye s
223824 300 (20.7) 5-180 (0.3-12) 20 (75) SST, Acetal and PTFE Manual 2 in Sanitary 1/3 npt(f) Yes
288117 300 (20.7) 25-250 (1.7-17) 20 (75) SST, Acetal and PTFE Air 1-1/4 F 1/4 npt(f) Yes
288311 300 (20.7) 25-250 (1.7-17) 20 (75) SST, Acetal and PTFE Air 1-1/2 F 1/4 npt(f) Yes
288262 300 (20.7) 25-250 (1.7-17) 20 (75) SST, Acetal and PTFE Air 2 in Sanitary 1/4 npt(f) Yes
234262 145 (10) 15-145 (1-10) 4.6 (17.4) SS Spring
234261 290 (20) 15-290 (1-20) 5.7 (21.5) SS Spring
234255 290 (20) 29-290 (2-20) 7.8 (29.5) SS Spring
234257 145 (10) 15-145 (1-10) 4.6 (17.4) SS Air
234258 725 (50) 73-725 (5-50) 11.5 (43.5) SS Spring
Max Pressure
psi (bar)
Regulated Pressure
psi (bar)
Max Delivery
gpm (lpm) Wetted Parts Type
Inlet/
Outlet
3/4 F
3/4 F
3/4 F
3/4 F
3/4 F
3/4 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
1-1/4 F
1-1/4 F
1-1/4 F
1-1/4 F
3/8 M
3/8 F
3/8 M
3/8 F
3/8 M
3/8 F
3/8 M
3/8 F
1 F
1 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
3/8 F
Gauge
Port
1/4 BSPP No
1/4 BSPP No
1/4 BSPP No
– No
– Ye s
– No
– Ye s
1/4 F Ye s
1/4 F Ye s
1/4 F Ye s
1/4 F Ye s
1/4 F No
1/4 F Ye s
1/4 F Ye s
1/8 BSPP No
1/8 BSPP No
1/8 BSPP No
1/8 BSPP No
1/8 BSPP No
Includes
Gauge
38
Page 39
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Low Pressure
Fluid Pressure Regulator
• Stainless steel wetted materials are compatible with
catalyst and waterborne materials
• Removable adjustment key eliminates operator interference
• Manual quick flush mode ensures easy cleaning without
impacting production settings
• Air operated model (214980) provides easy automation
opportunities
• Low shear model (222115) uses laminar diaphragm valve
to reduce material degradation and color matching issues,
especially with metallic paint
• Tungsten and carbide materials ensure low wear and long life
214980 214706 222115
• PTFE/Elastomer hybrid diaphragm withstands wear while
maintaining accurate responsiveness
Ordering Information
Max
Pressure
Part No.
214980 250 (17.5) 0-30 (0-2) 3.0 (11.3) 1000 Tungsten carbide, acetal resins, PTFE,
222115 250 (17.5) 20-160 (1-11) 3.0 (11.3) 300 SST Spring 3⁄8 F
214895 250 (17.5) 5-100 (0-7) 3.0 (11.3) 1000 Tungsten carbide, acetal resins, PTFE,
214706 250 (17.5) 5-100 (0-7) 3.0 (11.3) 1000 Tungsten carbide, acetal resins, PTFE,
217314 250 (17.5) 20-160 (1-11) 3.0 (11.3) 1000 Tungsten carbide, acetal resins, PTFE,
221118 250 (17.5) 20-160 (1-11) 3.0 (11.3) 1000 Tungsten carbide, acetal resins, PTFE,
psi (bar)
Regulated
Pressure
psi (bar)
Max
Delivery
gpm (lpm)
Max
Viscosity
in CPS
Wetted
Parts Type
Air 3⁄8 F
304 & 316 SST, nylon, PET
Spring 3⁄8 F
304 & 316 SST, nylon, PET
Spring 3⁄8 F
304 & 316 SST, nylon, PET
Spring 3⁄8 F
304 & 316 SST, nylon, PET
Spring 3⁄8 F
304 & 316 SST, nylon, PET
Inlet/
Outlet
3⁄8 F
3⁄8 F
3⁄8 F
3⁄8 F
3⁄8 F
3⁄8 F
Gauge
Port
1/4 F Yes
1/4 F Yes
1/4 F No
1/4 F Yes
1/4 F Yes
1/4 F No
Gauge
Included
Instruction manual 307212
39
Page 40
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Low Pressure Lightweight Composite
Fluid Pressure Regulator
• Lightweight composite material is compatible with
waterborne materials
• PTFE, stainless steel seat, and carbide ball provide
wear resistance
• Air operated model (241976) provides easy
automation opportunities
• Pressure adjustment key with locking mechanism
protects production settings
Ordering Information
Max
Pressure
Part No.
236449 100 (7) 3-30 (0.2-2) 0.5 (1.9) 1000 Acetal Spring 1/4 F
241976 100 (7) 3-30 (0.2-2) 0.5 (1.9) 1000 Acetal Air 1/4 F
236281 100 (7) 3-100 (0.2-7) 0.5 (1.9) 1000 Acetal Spring 1/4 F
236216 100 (7) 20-100 (1-7) 0.5 (1.9) 1000 Acetal Spring 1/4 F
236450 100 (7) 20-100 (1-7) 0.5 (1.9) 1000 Acetal Spring 1/4 F
Composite construction. Instruction manual 308325
psi (bar)
Regulated
Pressure
psi (bar)
Max
Delivery
gpm (lpm)
Max
Viscosity
in CPS
Wetted
Parts Type
Inlet/
Outlet
1/4 F
1/4 F
1/4 M
1/4 F
1/4 F
236449
Gauge
Port
1/4 F Ye s
1/4 F No
1/4 F Ye s
1/4 F No
1/4 F Ye s
Gauge
Included
40
Page 41
Finishing Accessories
1100
100
Fluid Flow Rate - cc/min
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Precision Flow
Fluid Pressure Regulator
• Spring-less fluid path reduces maintenance and internal
material build up
• Stainless steel wetted materials are compatible with catalyst
and waterborne materials
• Air operated control for easy automation integration
• High-flow bypass provides quick flushing capabilities without
adjusting production settings
• Compact and lightweight design saves space and reduces
payload for robot integration
24C375 24E471 24E472
Ordering Information
Part No.
24C375 1-90 (0.06-6.2) 1:1 Silver SST Air 1/4 M
24E471 1-50 (0.06-3.4) 1:2 Green SST Air 1/4 M
24E472 1-30 (0.06-2.0) 1:3 Black SST Air 1/4 M
Instruction manual 3A0427
1000
900
800
700
600
500
400
300
200
100
0
0 10 20 30 40 50 60 70 80 90
Max
Pressure
psi (bar)
Viscosity
25 cp
75 cp
Test conditions: 90 psi fluid inlet, 1.0 mm nozzle, 10 ft 1/4 ID hose
Regulated
Pressure
Ratio
1:1
Air Pilot Signal - psi
Ratio
Spacer
Wetted
Parts Type
1:2
1:3
Inlet/
Outlet
1/8 F
1/8 F
1/8 F
41
Page 42
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
High Pressure Corrosion Resistant
Fluid Pressure Regulator
• Stainless steel wetted materials are compatible with catalyst
and waterborne materials
• Air operated model (241976) provides easy automation
opportunities
• Tungsten and carbide materials ensure low wear and long life
• Valve cartridge for quick cleaning and replacement –
reduce downtime
• Glycerin filled gauge for accurate pressure reading
Ordering Information
Max
Pressure
Part No.
238889 6000 (413) 500-3000
238890 6000 (413) 500-3000
238891 6000 (413) 3000-5000
238892 6000 (413) 3000-5000
238893 6000 (413) 500-4000
238894 6000 (413) 500-4000
psi (bar)
Regulated
Pressure
psi (bar)
(34-206)
(34-206)
(206-344)
(206-344)
(34-275)
(34-275)
Max
Delivery
gpm (lpm)
1.0 (3.7) 15000 SST Spring 3⁄8 F
1.0 (3.7) 15000 SST Spring 3⁄8 F
1.0 (3.7) 15000 SST Spring 3⁄8 F
1.0 (3.7) 15000 SST Spring 3⁄8 F
1.0 (3.7) 15,000 SST Air 3⁄8 F
1.0 (3.7) 15,000 SST Air 3⁄8 F
Max
Viscosity
in CPS
238889 238893
Wetted
Parts Type
Inlet/
Outlet
3⁄8 F
3⁄8 F
3⁄8 F
3⁄8 F
3/8 F
3/8 F
Gauge
Port
1/4 F No
1/4 F Ye s
1/4 F No
1/4 F Ye s
1/4 F No
1/4 F Ye s
Gauge
Included
Easy flush plug available. Instruction manual 308647.
42
Page 43
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
High Pressure Corrosion Resistant Mini
Fluid Pressure Regulator
• Stainless steel wetted materials are compatible with catalyst
and waterborne materials
• Pressure adjustment key with locking mechanism protects
production settings
• Valve cartridge for quick cleaning and replacement – reduce downtime
• Compact and lightweight design saves space and reduces payload
for spray packages
• Tungsten and carbide materials ensure low wear and long life
Ordering Information
Max
Pressure
Part No.
222121 1500 (103) 150-1200
240197 1500 (103) 150-1200
240198 1500 (103) 150-1200
Unique bottom replaceable cartridge. Instruction manual 307886.
psi (bar)
Regulated
Pressure
psi (bar)
(10-83)
(10-83)
(10-83)
Max
Delivery
gpm (lpm)
1.0 (3.7) 500 SST Spring 1/4 F
1.0 (3.7) 500 SST Spring 1/4 F
1.0 (3.7) 500 SST Spring 1/4 F
Max
Viscosity
in CPS
Wetted
Parts Type
Inlet/
Outlet
1/4 F
1/4 F
1/4 F
222121
Gauge
Port
– No
1/4 F Ye s
1/4 F Ye s
Gauge
Included
43
Page 44
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
High Pressure
Fluid Pressure Regulator
• Tungsten and carbide materials ensure low wear
and long life
• Plated carbon steel housing is compatible with
solvent-borne materials
• Laser-marked indication lines for easy pressure
adjustment and process control
• Ergonomic adjustment knob
Ordering Information
Max
Pressure
Part No.
217576 3000 (206) 200-1000
206661 3000 (206) 1000-3000
Airless, solvent based systems. Instruction manual 306878.
psi (bar)
Regulated
Pressure
psi (bar)
(13-69)
(69-206)
Max
Delivery
gpm (lpm)
3.5 (13.2) 500 CS Spring 3⁄8 F
3.5 (13.2) 500 CS Spring 3⁄8 F
Max
Viscosity
in CPS
Wetted
Parts Type
217576
Inlet/
Outlet
1/4 F
1/4 F
Gauge
Port
1/4 F Ye s
1/4 F Ye s
Gauge
Included
44
Page 45
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Low Pressure Corrosion Resistant
Fluid Back Pressure Regulator (BPR)
• Stainless steel wetted materials are compatible with catalyst
and waterborne materials
• Hardened stainless steel seat ensure low wear and long life
• PTFE/Elastomer hybrid diaphragm withstands wear while
maintaining accurate responsiveness
• Large orifice accommodates high volume flow rates
• Air operated models available for automated control,
Conversion kit (15J498)
208997
Ordering Information
Max
Pressure
Part No.
208997 180 (12) 0-180
916154 180 (12) 0-180
903508 180 (12) 0-180
Instruction manual 307107.
Conversion kit 15J498 - converts a 208997 spring operated back pressure regulator to a pneumatic back pressure regulator.
Repair kit 15J820 - diaphragm repair kit with standard stainless steel seat.
Repair kit 15J822 - carbide repair kit for back pressure regulator.
psi (bar)
Regulated
Pressure
psi (bar)
(0-12)
(0-12)
(0-12)
Max
Delivery
gpm (lpm)
15.0 (56.7) 1000 SST Spring 1-1/4 F
15.0 (56.7) 1000 SST, Carbide Spring 1-1/4 F
15.0 (56.7) 1000 SST Spring 1 F
Max
Viscosity
in CPS
Wetted
Parts Type
Inlet/
Outlet
1-1/4 F
1-1/4 F
1-1/4 F
Gauge
Port
1/4 F Ye s
1/4 F Ye s
1/4 F Ye s
Gauge
Included
45
Page 46
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Low Pressure Mini
Fluid Back Pressure Regulator (BPR)
• Stainless steel wetted materials are compatible with catalyst
and waterborne materials
• Tungsten and carbide materials ensure low wear and long life
• Compact and lightweight design saves space and reduces
payload for small circulation systems
• PTFE/Elastomer hybrid diaphragm withstands wear while
maintaining accurate responsiveness
• Air operated model available for automated control,
Conversion kit (237448)
Ordering Information
Max
Pressure
Part No.
205122 180 (12) 0-180
237503 180 (12) 5-180
236770 180 (12) 5-180
Instruction manual 308401.
psi (bar)
Regulated
Pressure
psi (bar)
(0-12)
(0-12)
(0-12)
Max
Delivery
gpm (lpm)
2.0 (7.5) 1000 CS Spring 3⁄8 M
4.3 (16.2) 1000 SST Spring 3⁄8 M
4.3 (16.2) 1000 SST Spring 3⁄8 M
Max
Viscosity
in CPS
Wetted
Parts Type
Inlet/
Outlet
3/8 F
3/8 F
3/8 F
205122
Gauge
Port
1/4 F Ye s
1/4 F No
1/4 F Ye s
Gauge
Included
46
Page 47
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Air Operated Corrosion Resistant
Fluid Back Pressure Regulator (BPR)
• PTFE/Elastomer hybrid diaphragm withstands wear while
maintaining accurate responsiveness
• Stainless steel wetted materials are compatible with catalyst
and waterborne materials
• Hardened stainless steel seat ensure low wear and long life
• Large orifice accommodates high volume flow rates
• Air operated for remote automated control to eliminate
operator interference
• Implement sleep mode to reduce pump energy consumption
during non-production
Ordering Information
Max
Pressure
Part No.
288117 300 (20.7) 25-250
288311 300 (20.7) 25-250
288262 300 (20.7) 25-250
Part Number Description
15J498 Conversion kit - coverts a 208997 spring operated back pressure regulator to a pneumatic back pressure regulator
15J820 Diaphragm repair kit with standard stainless steel seat
15J821 High-Flo diaphragm repair kit with standard stainless steel seat
15J822 Diaphragm repair kit with standard carbide seat
psi (bar)
Regulated
Pressure
psi (bar)
(1.7-17)
(1.7-17)
(1.7-17)
Max
Delivery
gpm (lpm)
20 (75) 1000 SST, Acetal
20 (75) 1000 SST, Acetal
20 (75) 1000 SST, Acetal
Max
Viscosity
in CPS
Wetted
Parts Type
and PTFE
and PTFE
and PTFE
Inlet/
Outlet
Air 1-1/4 npt(f) 1/4 npt(f) Ye s
Air 1-1/2 npt(f) 1/4 npt(f) Ye s
Air 2 in Sanitary 1/4 npt(f) Yes
Gauge
Port
288262
Gauge
Included
Instruction manual 311595.
47
Page 48
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Low Shear Corrosion Resistant
Fluid Back Pressure Regulator (BPR)
• Stainless steel membrane diaphragm is highly wear resistant
while maintaining accurate responsiveness
• Low Shear diaphragm valve has minimal restriction to reduce
material degradation and color matching issues, especially with
metallic paint
• Stainless steel wetted materials are compatible with catalyst
and waterborne materials
• Large fluid passages to accommodate high volume flow rates
Ordering Information
Max
Pressure
Part No.
224486 300 (20.7) 5-180 (0.3-12) 20 (75) 1000 SST, Acetal
223824 300 (20.7) 5-200 (0.3-13) 20(75) 1000 SST, Acetal
Instruction manual 308115.
psi (bar)
Regulated
Pressure
psi (bar)
Max
Delivery
gpm (lpm)
Max
Viscosity
in CPS
Wetted
Parts Type
and PTFE
and PTFE
223824
Inlet/
Outlet
Spring 1-1/2 F 1/4 F Ye s
Spring 2 in
Sanitary
Gauge
Port
1/4 F Ye s
Gauge
Included
48
Page 49
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Low Pressure
Fluid Back Pressure Regulator (BPR)
• Electroless nickel plated aluminum housing with
smooth flow orifices
• Tungsten and carbide materials to resist wear
• PTFE/Elastomer hybrid diaphragm withstands wear while
maintaining accurate responsiveness
• Compatible with solvent-borne materials
Ordering Information
Max
Pressure
Part No.
206019 180 (12) 0-180
Instruction manual 306770.
psi (bar)
Regulated
Pressure
psi (bar)
(0-12)
Max
Delivery
gpm (lpm)
15.0 (56.7) 1000 Alum Spring 1 F
Max
Viscosity
in CPS
Wetted
Parts Type
Inlet/
Outlet
1 F
206019
Gauge
Port
1/4 F Ye s
Gauge
Included
49
Page 50
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
High Pressure
Fluid Back Pressure Regulator (BPR)
• Tungsten and carbide materials ensure low wear and long life
• Plated carbon steel housing is compatible with solvent-borne
materials
• Laser-marked indication lines for easy pressure adjustment
and process control
• Ergonomic adjustment knob
Ordering Information
Max
Pressure
Part No.
222405 3000 (207) 0 - 1000
206819 3000 (207) 1000 - 3000
238926 3000 (207) 1000 - 3000
High pressure, solvent coatings. Instruction manual 306860.
Part No.
234268 2500 (172) 600 - 1500
234269 3400 (234) 1300 - 3000
psi (bar)
Max
Pressure
psi (bar)
Regulated
Pressure
psi (bar)
(0 - 70)
(70 - 207)
(70 - 207)
Regulated
Pressure
psi (bar)
(41 - 103)
(89 - 207)
Max
Delivery
gpm (lpm)
3.5 (13.3) 500 CS Spring 1/4 F
3.5 (13.3) 500 CS Spring 1/4 F
3.5 (13.3) 500 SST Spring 1/4 F
Max
Delivery
gpm (lpm)
10.2 (38.6) – SS Spring 3/8 F – No
13.1 (49.5) – SS Spring 3/8 F – No
Max
Viscosity
in CPS
Max
Viscosity
in CPS
Wetted
Parts Type
Wetted
Parts Type
222405
Inlet/
Outlet
1/4 F
1/4 F
1/4 F
Inlet/
Outlet
234268
Gauge
Port
1/4 F No
1/4 F No
1/4 F No
Gauge
Port
Gauge
Included
Gauge
Included
Solvent/water based. Instruction manual 309475.
50
Page 51
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Twistlock Fluid Regulators
Gun-Mounted Regulator
• Stainless steel materials are compatible with catalyst and
waterborne materials
• PTFE/Elastomer hybrid diaphragm withstands wear while
maintaining accurate responsiveness
• Easy and accurate pressure adjustment at the gun to fine tune
pressure settings during production
• Connects quickly to spray guns using twistlock connector
• Circulate materials though the regulator to ensure a uniform
223621 223622
fluid suspension and eliminate material stagnation
Ordering Information
Inlet/
Part No.
223621 3⁄8 twistlock 200 14 1.4 5-35 0.3-2.4 0.03-0.24 1 3.8 SST
Note: 3⁄8 twistlock outlet to gun. Regulator to gun fitting 223628 twistlock. Instruction manual 307016.
Part No.
208082 1⁄4 npsm(m) 200 14 1.4 5-35 0.3-2.4 0.03-0.24 SST
Note: 208085 regulator to gun fitting. Circulating spring-mounted gun mount. Viscosity range up to 500 cps.
Note: To convert from standard Buna-N diaphragm to PTFE, order 185028 PTFE diaphragm and 168880
Mylar backing diaphragm to replace standard Buna-N and nylon diaphragm. Instruction manual 307016.
Part No.
223622 3⁄8 npsm(f) 200 14 1.4 5-35 0.3-2.4 0.03-0.24 SST
Outlet
Inlet/
Outlet
Inlet/
Outlet
Max. Inbound Fluid Regulated Pressure Max Delivery
Max. Inbound Fluid Regulated Pressure
Max. Inbound Fluid Regulated Pressure
Wetted
Partspsi bar MPa psi bar MPa
Wetted
Partspsi bar MPa psi bar MPa
Wetted
Partspsi bar MPa psi bar MPa gpm lpm
Note: Regulator to gun fitting 223628 twistlock. Direct to gun fitting. Instruction manual 307016.
Part No.
223623 3⁄8 twistlock 200 14 1.4 5-35 0.3-2.4 0.03-0.24 SST
Note: Regulator to gun fitting 223628 twistlock. Instruction manual 307016.
Inlet/
Outlet
Max. Inbound Fluid Regulated Pressure
Wetted
Partspsi bar MPa psi bar MPa
51
Page 52
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Twistlock Fluid Circulating
Restrictor Valves
Tamper-Resistant Gun Regulators
• Manually adjust flow settings at the gun
• Tamper resistant adjustment knob to eliminate operator interference
• Circulate materials though the valve to ensure a uniform fluid
suspension and eliminate material stagnation
• Stainless steel materials are compatible with catalyst and
waterborne materials
• PTFE/Elastomer hybrid diaphragm withstands wear while
maintaining accurate responsiveness
223617 223619
• Connects quickly to spray guns using twistlock connector
Ordering Information
Inlet/
Part No.
223617 1⁄4 npsm(m) 300 21 2.1 0-300 0-21 0-2.1 1 3.8 SST
Note: 3⁄8 twistlock outlet to gun. Regulator to gun fitting 223628 twistlock.
Regulator type: adjustable restrictor. Instruction manual 307751.
Part No.
223618 3/8 npsm(m) 300 21 2.1 0-300 0-21 0-2.1 1 3.8 SST
Note: up to 1000 cps viscosity. Instruction manual 307751.
Part No.
223619 1/4 npsm(m) 300 21 2.1 0-300 0-21 0-2.1 1 3.8 SST
Outlet
Inlet/
Outlet
Inlet/
Outlet
Max. Inbound Fluid Regulated Pressure Max Delivery
Max. Inbound Fluid Regulated Pressure Max Delivery
Max. Inbound Fluid Regulated Pressure Max Delivery
Wetted
Partspsi bar MPa psi bar MPa gpm lpm
Wetted
Partspsi bar MPa psi bar MPa gpm lpm
Wetted
Partspsi bar MPa psi bar MPa gpm lpm
Note: 3/8 npsm(f) swivel. Instruction manual 307751.
Part No.
223620 3/8 npsm(m) 300 21 2.1 0-300 0-21 0-2.1 1 3.8 SST
Note: 3/8 npsm(f) coupler. Instruction manual 307751.
Note: Restrictor valves require tool 220102 to adjust. *All models are waterborne compatible.
Inlet/
Outlet
Max. Inbound Fluid Regulated Pressure Max Delivery
Wetted
Partspsi bar MPa psi bar MPa gpm lpm
52
Page 53
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Pressure Regulators
Twistlock Fluid Quick Couplers
Other Accessories
• Stainless Steel and PTFE materials are compatible
with finishing materials
• Quick couplers automatically seal once disconnected
• Quickly change between guns, regulators, and lines
to reduce setup, changeover, and maintenance time
• Don’t flush through guns tips, disconnect and flush
through quick connects. Reduce flushing time and
avoid premature tip wear.
• Provide flexibility for operators, especially those
that own or maintain their own guns. Promote
daily maintenance.
• Compatible with Graco Gun Regulators and Restrictors
223624 223625223627 223628
Ordering Information
Maximum WPR
Part No. Inlet/Outlet
• 223627 Coupler stem 200 14 1.4 Twistlock (m) 3/8 npsm (f) SST 307016
• 223624 Straight adapter 200 14 1.4 3/8 npsm (m) Twistlock (f) SST 307016
• 223625 Straight adapter 300 20.7 2.07 3/8 npsm (m) Twistlock (f) SST 307016
• 223628 Coupler stem 300 20.7 2.07 Twistlock (m) 3/8 npsm (f) SST 307016
Inlet &
Return Ports Outlet Material Manualpsi bar MPa
53
Page 54
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Surge Suppressors
Surge Suppressors are a simple and reliable way to reduce pulsation and assure smooth
fluid transfer throughout your finishing system. Graco surge suppressors were designed
specifically for the finishing industry from decades of pump technology research. The
streamlined fluid path ensures low shear, smooth fluid flow, and superior flush ability.
54
Page 55
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Surge Suppressors
High Flow
Surge Suppressors
• Reduces pulsation for consistent material delivery and
uniform spray pattern
• Stainless steel and PTFE materials are compatible with
many finishing materials
• In-line flow configuration is easy to flush, making color
changes quick and easy
• Multiple fluid connection options accommodate global
system requirements
• Ideal for large, high flow rate systems
238986
Ordering Information
Inlet/
Part No. Description
238986 Surge Tank 2 300 21 2.1 20 76 SST, PTFE 307707
238987 High-Flo Surge Tank 2* 300 21 2.1 20 76 SST, PTFE 307707
238988 High-Flo Surge Tank 1-1⁄2* 300 21 2.1 20 76 SST, PTFE 307707
218509 High-Flo Surge Tank 2* 600 42 4.2 20 76 Carbide, SST
*Sanitary Tri-Clamp compatible
Note: Maximum flow rates are recommended maximums for peak performance. Exceeding these values reduces the surge tanks ability
to dampen pulsation.
Outlet npt
Maximum WPR Max. Delivery
Material Manualpsi bar MPa gpm lpm
307707
UHMWPE, Viton
PTFE
55
Page 56
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Surge Suppressors
In-line
Surge Suppressor
• Stainless steel and PTFE materials are compatible with
many finishing materials
• Reduces pulsation for consistent material delivery and
uniform spray pattern
• In-line flow configuration is easy to flush, making color
changes quick and easy
Ordering Information
Inlet/
Part No.
220157 1 x 1-1⁄4
Outlet npt
npt(f)
Maximum Inbound Fluid Max. Delivery
600 42 4.2 15 57 Carbine, SST, UHMWPE,
220157
Wetted Parts Manualpsi bar MPa gpm lpm
307707
Viton, PTFE
56
Page 57
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Surge Suppressors
Tee Surge Suppressor
• Stainless steel and PTFE materials are compatible with
many finishing materials
• Reduces pulsation for consistent material delivery and
uniform spray pattern
• Isolate the surge tank and perform on-line maintenance
with tee configuration
Ordering Information
Inlet/
Part No.
• 233736 3/4
• Waterborne compatible
Outlet npt
BSPP(f)
Maximum Inbound Fluid
360 25 2.5 SST, PTFE 307707
233736
Wetted Parts Manualpsi bar MPa
57
Page 58
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
Safe guard your process by removing contaminates from your circulation line. Graco has a
high quality filter solution for a wide range of pressure and flow rates.
Bag Filter
Bag filters are a great solution for filtering high volumes of liquid. They are simple, economical, and
effective. This filter works well in conjunction with any of our high quality, high volume pumps. Graco’s
high capacity filters extend the time between filter changes which is ideal for large circulation systems in
which downtime is not an option.
Red Alert
Red Alert filters are a unique filtering option. The integrated Red Alert Pop Up Indicator signals the user that
it is time to change the filter. This minimizes operator error and the need for check sheets or maintenance
schedules. It also keeps filters from clogging and ensures your operation runs more efficiently.
High Pressure
Graco’s high pressure filter is ideal for high or low pressure finishing applications to reduce material
usage during flushing to save you money. The design also resists wear and damage from even the
most corrosive and abrasive materials. Whether used on a spray package, a 2K catalyst system or
circulation out-feed, this versatile filter won’t let you down.
58
Page 59
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
Stainless Steel High Pressure Filter
Filters
• Compatible with catalyst and waterborne materials
• Many porting options for different gauge, drain valve,
and fluid line options
• Compact size is ideal for spray packages
223160
Ordering Information
Area/sq.
Part No. Description
• 223160 Filter assembly 18 116 60 3⁄8(f)
• 239800 Filter assembly 18 116 100 3⁄8(f)
• 238782 Filter assembly for
high solids material
240183 18 116 60 1/2(f) x 1/2(f) 5000 345 34.5 304 SST 307273
18 116 30 3/8(f)
Inlet/
Mesh
Outlet npt
1⁄4(m)
1⁄4(m)
outlets: 3/8, 1/4, 1/4
bottom: 1/4
Maximum WPR
Material Manualin cm psi bar MPa
5000 345 34.5 304, 316 SST 307273
5000 345 34.5 304, 316 SST 307273
5000 345 34.5 304, 316 SST 308611
Replacement Screen Elements
25-Count Carton
Part No.
• 238436 224458 18 116 30 SST
• 238438 224459 18 116 60 SST
• 238440 224468 18 116 100 SST
• 238442 224469 18 116 200 SST
2-Pack
Part No.
Area/sq.
Mesh Materialin cm
59
Page 60
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
High Pressure Red Alert Filter
Filters
• Red Alert indicator signals filter element replacement
to ensure efficient filtration
• Large flow capacity is ideal for large circulation and
supply systems
• Integrated mounting holes make installation to frame
and equipment easy
• Bottom port for installing quick flush ball valve
210090
Ordering Information
Area/sq.
Part No.
210090 36 232 60 3⁄4 3000 207 20.7 10 38 CS, glass sight and FKM o-rings 307252
210091 36 232 100 3⁄4 3000 207 20.7 10 38 CS, glass sight and FKM o-rings 307252
210092 36 232 200 3⁄4 3000 207 20.7 10 38 CS, glass sight and FKM o-rings 307252
207994 225 1451 30 1-1⁄4 3000 207 20.7 20 75 CS, glass sight and FKM o-rings 306987
207995 225 1451 60 1-1⁄4 3000 207 20.7 20 75 CS, glass sight and FKM o-rings 306987
207996 225 1451 100 1-1⁄4 3000 207 20.7 20 75 CS, glass sight and FKM o-rings 306987
207997 225 1451 150 1-1⁄4 3000 207 20.7 20 75 CS, glass sight and FKM o-rings 306987
207998 225 1451 200 1-1⁄4 3000 207 20.7 20 75 CS, glass sight and FKM o-rings 306987
207999 225 1451 .040
208000 225 1451 .050
Mesh
stab pt.*
stab pt.*
Inlet/
Outlet npt
1-1⁄4 3000 207 20.7 20 75 CS, glass sight and FKM o-rings 306987
1-1⁄4 3000 207 20.7 20 75 CS, glass sight and FKM o-rings 306987
Maximum WPR Max. Delivery
Material of Construction Manualin cm psi bar MPa gpm lpm
60
Page 61
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
Low Pressure Red Alert Filter
Filters
• Red Alert indicator signals filter element replacement
to ensure efficient filtration
• Large flow capacity is ideal for large circulation and
supply systems
• Integrated mounting holes make installation to frame
and equipment easy
• Bottom port for installing quick flush ball valve
213058
Ordering Information
Area/sq.
Part No. Assembly
213057 Complete 36 232 30 3⁄4 npt 300 21 2.1 6 22 Aluminum, glass sight and FKM o-rings 307282
213058 Complete 36 232 60 3⁄4 npt 300 21 2.1 6 22 Aluminum, glass sight and FKM o-rings 307282
213059 Complete 36 232 100 3⁄4 npt 300 21 2.1 6 22 Aluminum, glass sight and FKM o-rings 307282
213060 Complete 36 232 150 3⁄4 npt 300 21 2.1 6 22 Aluminum, glass sight and FKM o-rings 307282
213061 Complete 36 232 200 3⁄4 npt 300 21 2.1 6 22 Aluminum, glass sight and FKM o-rings 307282
213062 Complete 225 1451 30 1-1⁄4 npt 300 21 2.1 20 76 Aluminum, glass sight and FKM o-rings 307283
213063 Complete 225 1451 60 1-1⁄4 npt 300 21 2.1 20 76 Aluminum, glass sight and FKM o-rings 307283
213064 Complete 225 1451 100 1-1⁄4 npt 300 21 2.1 20 76 Aluminum, glass sight and FKM o-rings 307283
213065 Complete 225 1451 150 1-1⁄4 npt 300 21 2.1 20 76 Aluminum, glass sight and FKM o-rings 307283
213066 Complete 225 1451 200 1-1⁄4 npt 300 21 2.1 20 76 Aluminum, glass sight and FKM o-rings 307283
Mesh
Inlet/
Outlet
Max WPR Max Delivery
Material Manualin cm psi bar MPa gpm lpm
61
Page 62
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
Model 6
Bag Filter Housing
Filters
• High flow capacity ideal for large circulation systems
• Easy to replace bag filters are inexpensive and effective at filtering
many types of media
• Flexible filter options make it easy to fine tune your filtration system
• Standard filter assembly includes housing, cover, cover o-ring and
unlined stainless steel basket
• Order filter bags separately
Ordering Information
Inlet/
Part No. Description
915515 Model 6
(0.5 sq ft filter area)
• 915516 Model 6
(0.5 sq ft filter area)
• Waterborne compatible
Part Number Description
521268 Stainless steel strainer basket, perforated
521276 Stainless steel strainer basket, perforated with 100 mesh liner
521306 Replacement eye-bolt and nut
521691 Replacement o-ring
Instruction manual: 311775
Outlet
1-1⁄4 npt 300 21 2.1 15 57 CS
1-1⁄4 npt 300 21 2.1 15 57 SST
Maximum WPR Max. Delivery
915515
Materialpsi bar MPa gpm lpm
62
Page 63
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
Model 6 Bag Filter Elements
Filters
• Many mesh sizes available to meet you exact filtration needs
• Polypropylene rim top uses fluid pressure to improve sealing force
• Stainless steel rim top uses friction to seal
Ordering Information
Polypropylene
Micron
5 16K497 521226
10 16K498 521227
25 16K499 521228
50 16K500 521229
75 16K501 521230
100 16K502 521231
125 16K503 521232
150 16K504 521233
200 16K505 521234
250 16K506 521235
300 16K507 521236
Rim Top SST Ring Top
Compatible
Filter Housings
915515
915516
Poly Rim Top
Replacement Filters Bags
Part
Number Material Micron Size
521311 Glazed polyester felt without cover 5
521177
521180
521335
521336
521337
521226
521227
521228
521229
521230
521231
521232
521233
521234
521235
521236
Glazed polyester felt encased in spun
bonded nylon cover
Glazed polyester felt encased in nylon
mono-filament mesh cover.
Nylon monofilament mesh. 5
25
100
50
75
100
10
25
50
75
100
125
150
200
250
300
63
Page 64
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
Model 12 Bag Filter Housings
Filters
• High flow capacity ideal for large circulation systems
• Easy to replace bag filters are inexpensive and effective at filtering
many types of media
• Flexible filter options make it easy to fine tune your filtration system
• Standard filter assembly includes housing, cover, cover o-ring and
unlined stainless steel basket
• Order filter bags separately
Ordering Information
Inlet/
Part No. Description
915517 Model 12
(1.0 sq ft filter area)
• 915518 Model 12
(1.0 sq ft filter area)
• 916367 Model 12
(sanitary with Poly Lok)
• Waterborne compatible
Part Number Description
521276 Stainless steel strainer basket, perforated
521280 Stainless steel strainer basket, perforated with 100 mesh liner
521306 Replacement eye-bolt and nut
521691 Replacement o-ring
Outlet
1-1⁄2 npt 500 21 2.1 30 114 CS
1-1⁄2 npt 500 21 2.1 30 114 SST
1-1/2
sanitary
Maximum WPR Max. Delivery
500 35 3.5 30 114 SST
916367
Materialpsi bar MPa gpm lpm
Instruction manual: 311775
64
Page 65
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Filters
Model 12 Bag Filter Elements
Filters
• Many mesh sizes available to meet you exact filtration needs
• Polypropylene rim top uses fluid pressure to improve sealing force
• Stainless steel rim top uses friction to seal
Ordering Information
Polypropylene
Micron
5 16K510 521254
10 16K511 521255
25 16K512 521256
50 16K513 521257
75 16K514 521258
100 16K515 521259
125 16K516 521260
150 16K517 521261
200 16K518 521262
250 16K519 521263
300 16K520 521264
Rim Top SST Ring Top
Compatible
Filter Housings
915517
915518
Poly Rim Top
Replacement Filters
Part
Number Material Micron Size
521183
521184
521189
521342
521344
521347
521254
521255
521256
521257
521258
521259
521260
521261
521262
521263
521264
Glazed polyester felt encased in spun
bonded nylon cover
Glazed polyester felt encased in nylon
mono-filament mesh cover.
Nylon monofilament mesh. 5
5
10
100
10
25
100
10
25
50
75
100
125
150
200
250
300
65
Page 66
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Hoses, Fittings, Swivels and Gauges
The key to a productivity is a complete system with hoses, fittings, swivels and gauges.
Our gauges, fittings and hoses have options for both air and fluids, and our
material selections cater to the needs of the finishing industry. They handle tough
solvents, moisture sensitive or corrosive acid catalysts. They withstand the harshest
environments and minimize downtime.
66
Page 67
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Bulk Hose and Fittings
Nylon Fluid Hose
• Nylon tube
• Compatible with catalyst and waterborne materials
• Order 500 ft (152 m) increments
2-piece Reusable Hose Fittings
• Compatible with catalyst and waterborne materials
• Easily create custom fluid hoses
No Spring Guard No Spring Guard Spring Guard
1/8 in
Part No. Size and Pressure
061135 1/8 in ID – 475 psi (33 bar) 205436 206020
061132 1/4 in ID – 225 psi (16 bar) 205437 205447 205448 111913 111914
061134 3/8 in ID – 200 psi (14 bar) 205439
NPT(M)
1/4 in
NPT(M)
1/4 in
NPSM(F)
3/8 in
NPSM(F)
1/4 in
NPSM(F)
3/8 in
NPSM(F)
67
Page 68
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Bulk Hose and Fittings
Braided Fluid Hose
• Nylon braided hose
• Neoprene cover
• Compatible with catalyst and waterborne materials
• Order 500 ft (152 m) increments
3-piece Reusable Hose Fittings
• Easily create custom fluid hoses
• Three piece threaded design
• Fittings can be reused
3 piece couplers 2 piece couplers
1/4 in
Part No. Size and Pressure
061205 1/4 in ID – 500 psi (35 bar) 104415 104084 16A989 16A990
061195 3/8 in ID – 300 psi (21 bar) 104414 16A992 16A993
061200 1/2 in ID – 500 psi (35 bar)
061185 3/4 in ID – 500 psi (35 bar)
061188 1 in ID – 500 psi (35 bar)
NPSM(F)
3/8 in
NPSM(F)
1/4 in
NPSM(F)
3/8 in
NPSM(F)
68
Page 69
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Bulk Hose and Fittings
Flexible Air Hose
• PVC braided hose
• PVC cover
• Flexible hose allows easy movement and improved ergonomics
• Bulk ordering allows custom fabrication of specialized hoses
• Order 500 ft (152 m) increments
2-piece Reusable Hose Fittings
• Simple two piece threaded design
• Easily create custom fluid hoses
2 piece couplers
1/4 in
Part No. Size and Pressure
15E291 1/4 in ID – 300 psi (21 bar) 16A989 16A990
15E292 5/16 in ID – 300 psi (21 bar) 16A997 15K920
15E293 3/8 in ID – 300 psi (21 bar) 16A992 16A993
15E294 1/2 in ID – 300 psi (21 bar) 16A995
NPT(M)
1/4 in
NPSM(F)
3/8 in
NPSM(F)
1/2 in
NPSM(F)
69
Page 70
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Coupled Stainless Steel
Hoses
• Compatible with moisture sensitive materials
• Many different sizes, lengths, pressures,
and connections available
• Fully assembled, includes couplings
• PTFE hose with braided SST cover
Ordering Information
Coupling
Part No.
205324 1/4 npsm(fbe) 12 in
206966 1/4 npsm(fbe) 19 in
205099 1/4 npsm(fbe) 30 in
205058 1/4 npsm(fbe) 6 ft
205349 1/4 npsm(fbe) 15 ft
204938 1/4 npsm(fbe) 25 ft
206024 1/4 npsm(fbe) 50 ft
Size/Type Length
(0.3 m)
(0.48 m)
(0.76 m)
(1.8 m)
(4.5 m)
(7.6 m)
(15.2 m)
Maximum WPR
3000 210 21.0 1/4 in Wire Braid PTFE 1-Wire SST SST 2.0 (5) 200 (93)
3000 210 21.0 1/4 in Wire Braid PTFE 1-Wire SST SST 2.0 (5) 200 (93)
3000 210 21.0 1/4 in Wire Braid PTFE 1-Wire SST SST 2.0 (5) 200 (93)
3000 210 21.0 1/4 in Wire Braid PTFE 1-Wire SST SST 2.0 (5) 200 (93)
3000 210 21.0 1/4 in Wire Braid PTFE 1-Wire SST SST 2.0 (5) 200 (93)
3000 210 21.0 1/4 in Wire Braid PTFE 1-Wire SST SST 2.0 (5) 200 (93)
3000 210 21.0 1/4 in Wire Braid PTFE 1-Wire SST SST 2.0 (5) 200 (93)
ID
Size
Electrical
Grounding
Tube
Material
Braid No.
Material
Cover
Material
Cover
Color
Bend
Radius
(in (cm)
Max.
Temp.
ºF (ºC) psi bar MPa
70
Page 71
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Moisture-Lok
Hoses
• Compatible with moisture sensitive materials
• Designed specifically to prevent moisture permeation
through hose lining
• Many different sizes, lengths, pressures, and
connections available
• Fully assembled, includes couplings
• Ideal for use with plural component materials
Ordering Information
Coupling
Part No.
947233 1/4 npsm(fbe) 3 ft (0.9 m) 2750 190 19.0 1/4 in (6 mm)
947076 1/4 npsm(fbe) 6 ft (1.8 m) 2750 190 19.0 1/4 in (6 mm)
947077 1/4 npsm(fbe) 10 ft (3 m) 2750 190 19.0 1/4 in (6 mm)
947078 1/4 npsm(fbe) 15 ft (4.6 m) 2750 190 19.0 1/4 in (6 mm)
947079 1/4 npsm(fbe) 25 ft (7.6 m) 2750 190 19.0 1/4 in (6 mm)
947080 1/4 npsm(fbe) 50 ft (15.2 m) 2750 190 19.0 1/4 in (6 mm)
947475 3/8 npt(mbe) 2 ft (0.6 m) 2250 160 16.0 3/8 in (10 mm)
947081 3/8 npt(mbe) 6 ft (1.8 m) 2250 160 16.0 3/8 in (10 mm)
947082 3/8 npt(mbe) 10 ft (3 m) 2250 160 16.0 3/8 in (10 mm)
947083 3/8 npt(mbe) 15 ft (4.6 m) 2250 160 16.0 3/8 in (10 mm)
947084 3/8 npt(mbe) 25 ft (7.6 m) 2250 160 16.0 3/8 in (10 mm)
947085 3/8 npt(mbe) 50 ft (15.2 m) 2250 160 16.0 3/8 in (10 mm)
947086 1/2 npt(mbe) 6 ft (1.8 m) 2000 140 14.0 1/2 in (13 mm)
947087 1/2 npt(mbe) 10 ft (3 m) 2000 140 14.0 1/2 in (13 mm)
947089 1/2 npt(mbe) 25 ft (7.6 m) 2000 140 14.0 1/2 in (13 mm)
947091 3/4 npt(mbe) 6 ft (1.8 m) 1500 103 10.3 3/4 in (19 mm)
947092 3/4 npt(mbe) 10 ft (3 m) 1500 103 10.3 3/4 in (19 mm)
947093 3/4 npt(mbe) 15 ft (4.6 m) 1500 103 10.3 3/4 in (19 mm)
947094 3/4 npt(mbe) 25 ft (7.6 m) 1500 103 10.3 3/4 in (19 mm)
947096 1 npt(mbe) 6 ft (1.8 m) 1500 103 10.3 1 in (25 mm)
Size/Type Length
Maximum WPR
ID
Sizepsi bar MPa
71
Page 72
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
High Pressure Swivels
Swivels and Valves
• Improve mobility and ergonomics with high pressure swivels
• Swivels provide added rotational flexibility while providing
high quality sealing even at high pressures
• Inline and Z configurations availabl
189018
207948
Ordering Information
Part No. Inlet/Outlet npt
204083 1⁄4 npt(m)
1⁄8 npt(f)
204084 1⁄4 npt(m)
1⁄4 npt(f)
214925 1⁄4 npsm(f)
3⁄8 npt(f)
207946 1⁄2 npsm(f)
3⁄8 npt(f)
207947 1⁄2 npt(f)
1⁄2 npt(m)
214926 1⁄2 npsm(f)
3⁄8 npt(f)
• 239394 1⁄4 npsm(m)
1⁄4 npsm(f)
Includes: filter chamber and
100 mesh tip filter (205264)
• 189018 1⁄4 npsm(m)
1⁄4 npsm(f)
• Waterborne compatible
Maximum WPR
Packings Wetted Parts Manual Suggested Material*psi bar MPa
8000 551 55.1 Leather Steel-plated 306708 Oil, Grease, Lubricants
8000 551 55.1 Leather Steel-plated 306708 Oil, Grease, Lubricants
5000 345 34.5 Leather Steel-plated 306861 Oil, Grease, Lubricants
6000 413 41.3 Polyurethane Steel-plated 307005 Oil, Grease, Lubricants,
Solventborne Paint
6000 413 41.3 Polyurethane Steel-plated 307005 Oil, Grease, Lubricants,
Solventborne Paint
5000 345 34.5 Leather Steel-plated 306861 Oil, Grease, Lubricants
7500 517 51.7 PTFE SST Paint
7500 517 51.7 PTFE SST Paint & Catalyst
207948
(Z-Type
Swivel)
Caution: Z-swivels to be used with non-abrasive fluids only.
*General suggestion only. Results may vary depending on chemical composition.
1⁄2 (m)
1⁄2 (f)
6000 413 41.3 Polyurethane Steel-plated 307005 Oil, Grease, Lubricants,
Solventborne Paint
72
Page 73
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Automatic Spray Gun Valve
Swivels and Valves
• Automate your system with this robust pneumatically operated valve
• Mount easily to 1/2in (12.7mm) rod using built-in set screw
• Stainless steel wetted materials are compatible with catalyst,
waterborne, and other finishing materials
• Easily install a wide variety of flat tips for many spraying options
• Adjustment knob for fine tuning your process
Ordering Information
Part No. Inlet/Outlet npt
206660 1⁄4 npt(m)
1⁄8 npt(f)
Instruction manual: 306830
psi bar MPa
3000 517 51.7
206660
Maximum WPR
73
Page 74
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Check Valves
Swivels and Valves
• Stainless steel and PTFE materials are compatible with catalyst,
waterborne, and other finishing materials
• Prevent fluid leakage and backflow
• Compact and easy to install
• Improves pump performance
501867
• Easily install a wide variety of flat tips for many spraying options
Ordering Information
Maximum WPR
Part No. Inlet/Outlet npt
• 501867* 1⁄4 x 1⁄4 npt(mbe) 3000 207 20.7 PTFE 303 SST
• 501684* 3⁄8 x 3⁄8 npt(mbe) 3000 207 20.7 PTFE 303 SST
• 501603* 1⁄2 x 1⁄2 npt(fbe) 3000 207 20.7 PTFE 303 SST
• Waterborne compatible
*501867, 501684 and 501603 are poppet style
Packings Wetted Partspsi bar MPa
74
Page 75
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Pressure Relief Valve
Swivels and Valves
• Automatically relieves system pressure at specified rating to
protect your system from overpressure
• Stainless steel and PTFE materials are compatible with catalyst,
waterborne, and other finishing materials
• Compact and easy to install
• Tungsten and carbide materials ensure low wear and long life
Ordering Information
Inlet/
Outlet
Part No.
• 237060 1⁄2 (f)
• 237061 1⁄2 (f)
• 237112 1⁄2 (f)
• 237062 1⁄2 (f)
• 237073 1⁄2 (f)
• 237063 1⁄2 (f)
• 237074 1⁄2 (f)
npt
1⁄2 (m)
1⁄2 (m)
1⁄2 (m)
1⁄2 (m)
1⁄2 (m)
1⁄2 (m)
1⁄2 (m)
Relief
Port
1⁄2 npt(m) 475-575 33-40 3.3-4.0 750 52 5.2 PTFE 304 SST, tungsten
1⁄2 npt(m) 950-1150 66-79 6.6-7.9 1500 103 10.3 PTFE 304 SST, tungsten
1⁄2 npt(m) 1400-1800 97-124 9.7-12.4 2250 155 15.5 PTFE 304 SST, tungsten
1⁄2 npt(m) 1800-2300 124-159 12.4-15.9 3000 207 20.7 PTFE 304 SST, tungsten
1⁄2 npt(m) 2300-2900 159-200 15.9-20.0 3750 259 25.9 PTFE 304 SST, tungsten
1⁄2 npt(m) 2900-3600 200-248 20.0-24.8 4500 310 31.0 PTFE 304 SST, tungsten
1⁄2 npt(m) 3600-5000 248-345 24.8-34.5 6000 414 41.4 PTFE 304 SST, tungsten
Maximum WPR
psi bar MPa psi bar MPa
Relief “Cracking”
Pressure
Packings
237073
Wetted
Parts Manual
308547
carbide
308547
carbide
308547
carbide
308547
carbide
308547
carbide
308547
carbide
308547
carbide
• Waterborne compatible
75
Page 76
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Ball Valves
Swivels and Valves
• Stainless steel and PTFE materials are compatible with catalyst, waterborne, and other finishing materials
• Many different connection options to meet your specific needs
• 500 psi (35 bar) pressure ratio
Part No. Inlet/Outlet npt
237528 1/4”NPT(M) x
1/4”NPT(M)
Part No. Inlet/Outlet npt
237532 3/8”NPT(F) x
3/8”NPT(F)
Part No. Inlet/Outlet npt
237537 3/8” OD Tube x
3/8” OD Tube
Part No. Inlet/Outlet npt
237529 1/4”NPT(M) x
3/8”NPSM(M)
Part No. Inlet/Outlet npt
237533 3/8”NPSM(M) x
3/8”NPT(M)
Part No. Inlet/Outlet npt
237538 3/8” OD Tube x
3/8” NPT(M)
Part No. Inlet/Outlet npt
237530 3/8” NPT(M) x
1/4” NPT(M)
Part No. Inlet/Outlet npt
237535 3/8”NPT(F) x
3/8”NPSM(M)
Part No. Inlet/Outlet npt
237539 3/8” OD Tube x
3/8”NPSM(M)
Part No. Inlet/Outlet npt
237531 3/8”NPT(M) x
3/8”NPT(M)
Part No. Inlet/Outlet npt
237536 3/8” OD Tube x 3/8”
NPSM(M)
Part No. Inlet/Outlet npt
237540 1/2” OD Tube x
3/8” NPSM(M)
Part No. Inlet/Outlet npt
237541 1/2” OD Tube x
3/8” NPSM(M)
Instruction manual: 307628
Part No. Inlet/Outlet npt
237542 3/8” OD Tube x
3/8” OD Tube
76
Page 77
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Pipe Fittings
Other Accessories
Bushing
Reducing, Standard & Expanding
Male
Part No.
100030 1⁄4 npt 1⁄8 npt
100730 3⁄8 npt 1⁄8 npt
100176 3⁄8 npt 1⁄4 npt
159841 3⁄8 npt 1⁄4 npt
168160 3⁄8 npt 1⁄4 npt
100329 1⁄2 npt 1⁄8 npt
100206 1⁄2 npt 1⁄4 npt
Thread
Female
Thread
Part No.
102022 1⁄2 npt 1⁄4 npt
100081 1⁄2 npt 3⁄8 npt
100615 3⁄4 npt 1⁄4 npt
100896 3⁄4 npt 1⁄2 npt
100380 1 npt 1⁄2 npt
158586 1 npt 3⁄4 npt
Pipe Adapters
Male
Part No.
150171 1⁄8 npt 1⁄8 npt
159840 1⁄8 npt 1⁄4 npt
156580 1/8 npt 3⁄8 npt
150287 1⁄4 npt 3⁄8 npt
Thread
Female
Thread
Part No.
159842 1⁄4 npt 1⁄2 npt
150286 3⁄8 npt 3⁄8 npt
156022 3⁄8 npt 1⁄2 npt
168595 1⁄2 npt 3⁄4 npt
Male
Thread
Male
Thread
Female
Thread
Female
Thread
Street Elbow
Male
Part No.
100840 1⁄4 npt 1⁄4 npt
155699 3⁄8 npt 3⁄8 npt
158683 1⁄2 npt 1⁄2 npt
176393 3⁄4 npt 3⁄4 npt
Thread
Female
Thread
Coupling
Standard
Part No. Thread
100451 1/8 npt
100175 1/4 npt
162024 3/8 npt
158581 1/2 npt
100385 3/4 npt
100474 1 npt
Hex Nipple
Standard & Reducing
Part No.
151519 1⁄4 npt 1⁄8 npt
156971 1⁄4 npt 1⁄4 npt
156296 3⁄8 npt 1⁄8 npt
165198 3⁄8 npt 1⁄4 npt
156849 3⁄8 npt 3⁄8 npt
162449 1⁄2 npt 1⁄4 npt
Male
Thread
Female
Thread
Male
Part No.
159239 1⁄2 npt 3⁄8 npt
158491 1⁄2 npt 1⁄2 npt
157191 3/4 npt 1⁄2 npt
175013 3/4 npt 3/4 npt
158555 1 npt 3/4 npt
Thread
Female
Thread
Square
Head Plug
Part No. Thread
111697 1/4 npt
100040 3/8 npt
100737 1/2 npt
104663 3/4 npt
77
Page 78
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Pipe Swivels
Other Accessories
Straight Swivel Adapter
Male x Female
Rigid
Part No.
208434 1/8 npt 1/4 npt
156823 1/4 npt 1/4 npt
157705 1/4 npt 3/8 npt
155665 3/8 npt 3/8 npt
162505 3/8 npt 1/2 npt
Thread
Swivel
Thread
Part No.
156684 1/2 npt 1/2 npt
158256 1/2 npt 3/8 npt
157785 3/4 npt 3/4 npt
202965 1 npt 3/4 npt
160022 1 npt 1 npt
Straight Swivel Adapter
Female x Female
Rigid
Part No.
155570 1/4 npt 1/4 npt
159153 3/8 npt 1/4 npt
156173 3/8 npt 3/8 npt
155653 1/2 npt 1/4 npt
Thread
Swivel
Thread
Part No.
161077 1/2 npt 3/8 npt
155865 1/2 npt 1/2 npt
156172 3/4 npt 3/4 npt
158383 1 npt 1 npt
Rigid
Thread
Rigid
Thread
Swivel
Thread
Swivel
Thread
90º Swivel Adapter
Female x Female
Rigid
Part No.
157676 1/4 npt 1/4 npt
155677 3/8 npt 3/8 npt
159801 3/8 npt 1/2 npt
157416 1/2 npt 1/2 npt
156589 3/4 npt 3/4 npt
Thread
Swivel
Thread
90º Swivel Adapter
Male x Female
Rigid
Part No.
155541 1/4 npt 1/4 npt
155495 3/8 npt 1/4 npt
155494 3/8 npt 3/8 npt
217430 3/8 npt 1/2 npt
161037 1/2 npt 3/8 npt
155470 1/2 npt 1/2 npt
160327 3/4 npt 3/4 npt
Thread
Swivel
Thread
45º Swivel Adapter
Male x Female
Rigid
Part No.
161889 3/8 npt 3/8 npt
105281 3/4 npt 3/4 npt
Thread
Swivel
Thread
78
Page 79
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Stainless Steel Fittings
Other Accessories
Nipple
Pipe or
Fitting
Part No.
166421 Straight Pipe Nipple No No 7500 psi
166469 Straight Pipe Nipple No No 6000 psi
166846 Straight Pipe Adapter No No 7250 psi
171195 Straight Pipe Adapter No No – npt(m) x
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(516 bar)
(413 bar)
(499 bar)
Type of
Connection
npt(m) x
npt(m)
npt(m) x
npt(m)
npt(m) x
nps(m)
nps(m)
Reducing Nipple
Pipe or
Fitting
Part No.
166863 Straight Pipe Nipple No No 5000 psi
166443 Straight Pipe Nipple No No 7250 psi
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(344 bar)
(499 bar)
Type of
Connection
npt(m) x
npt(m)
npt(m) x
npt(m)
Overall
First
Connection
npt - 1/4 npt npt - 1/4 npt 1.38
npt - 3/8 npt npt - 3/8 npt 1.50
npt - 1/4 npt nps - 1/4
npt - 3/8 npt nps - 3/8
First
Connection
npt - 3/8 npt npt - 1/4 npt 1.31
npt - 3/4 npt npt - 1/2 npt 1.75
Second
Connection
npsm
npsm
Second
Connection
Length
in (cm) Material
(3.5)
(3.8)
1.19
(3.0)
1.31
(3.3)
Overall
Length
in (cm) Material
(3.3)
(4.4)
416 SST
416 SST
304 SST
303 SST
303 SST
303 SST
79
Page 80
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Stainless Steel Fittings
Other Accessories
45º Elbow
Pipe or
Fitting
Part No.
209029 Elbow Pipe 45º Yes No 4600 psi
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(316 bar)
Type of
Connection
npt(m) x
nps(f)
First
Connection
npt - 3/8 npt nps - 3/8
Second
Connection
npsm
Overall
Length
in (cm) Material
1.06 x 1.25
(2.6 x 3.1)
303 SST
90º Elbow
Pipe or
Fitting
Part No.
102325 Elbow Pipe 90º No No – npt(f) x npt(f) npt - 3/4 npt npt - 3/4 npt – 304 SST
110756 Elbow Pipe 90º No No 150 psi
207123 Elbow Pipe 90º Yes No 5000 psi
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(10 bar)
(344 psi)
Type of
Connection
npt(m) x
npt(m)
npt(m) x
nps(f)
First
Connection
npt - 3/8 npt npt - 3/8 npt – 304 SST
npt - 3/8 npt nps - 3/8
Second
Connection
npsm
Overall
Length
in (cm) Material
1.06 x 1.91
(2.6 x 4.8)
303 SST
90º Street Elbow
Part No.
166242 Elbow Pipe 90º No No 4500 npt(m) x
166866 Elbow Pipe 90º No No 9000 npt(m) x
515723 Elbow Pipe 90º No No 150 npt(m) x
Fitting
Conf.
Pipe or
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
Type of
Connection
npt(f)
npt(f)
npt(f)
Overall
First
Connection
npt - 1/2 npt npt - 1/2 npt 2.09
npt - 1/4 npt npt - 1/4 npt 1.34
npt - 1 npt npt - 1 npt – 304 SST
Second
Connection
Length
in (cm) Material
303 SST
(5.3)
304 SST
(3.4)
80
Page 81
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Stainless Steel Fittings
Other Accessories
Adapter
Pipe or
Fitting
Part No.
119226 Straight Pipe Bushing No No _ npt(m) x
114499 Straight Pipe Bushing No No 5000 psi
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(344 bar)
Type of
Connection
npt(f)
npt(m) x
npt(f)
Reducing Adapter
Pipe or
Fitting
Part No.
512351 Straight Pipe Bushing No No 5000 psi
121237 Straight Pipe Bushing No No 4000
121238 Straight Pipe Bushing No No 4000
16H491 Straight Pipe Adapter No No 5200
16J975 Straight Pipe Adapter No No 4300
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(344 bar)
(275 bar)
(275 bar)
(358 bar)
(296 bar)
Type of
Connection
npt(m) x
npt(f)
npt(m) x
npt(f)
npt(m) x
npt(f)
npt(m) x
npt(f)
npt(m) x
npt(f)
Overall
First
Connection
npt - 1/4 npt npt - 1/4 npt 1.39
npt - 1/2 npt npt - 1/2 npt 1.78
First
Connection
npt - 1/4 npt npt - 3/8 npt 1.44
npt - 3/8 npt npt - 1/2 npt 1.68
npt - 3/8 npt npt - 3/4 npt 1.75
npt - 1/4 npt npt - 1/2 npt 1.69
npt - 1/4 npt npt - 3/4 npt 1.88
Second
Connection
Second
Connection
Length
in (cm) Material
(3.5)
(4.5)
Overall
Length
in (cm) Material
(3.6)
(4.2)
(4.4)
(4.2)
(4.7)
316 SST
304/316
SST
303 SST
303 SST
303 SST
SST
SST
Tee
Part No.
16C760 Te e Pipe Adapter No No – npt(m) x
Fitting
Conf.
Pipe or
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
Type of
Connection
npt(m) x
nps(m)
Third
First
Connection
npt - 3/8 npt npt - 1/4 npt nps - 3/8
Second
Connection
Connec-
tion
npsm
Overall
Length
in (cm) Material
1.94
(4.9)
316 SST
81
Page 82
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Stainless Steel Fittings
Other Accessories
Bushing
Pipe or
Fitting
Part No.
116350 Straight Pipe Bushing No No 150 psi
502265 Straight Pipe Bushing No No 6000 psi
502851 Straight Pipe Bushing No No 3000
16C475 Straight Pipe Bushing No No 6000 psi
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(10 bar)
(413 bar)
(206 bar)
(413 bar)
Coupling
Pipe or
Fitting
Part No.
110336 Straight Pipe Coupling No No 5000 psi
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(344 bar)
Overall
Type of
Connection
npt(m) x
npt(f)
npt(m) x
npt(f)
npt(m) x
npt(f)
npt(m) x
npt(f)
Type of
Connection
npt(f) x npt(f) npt - 1/4 npt npt - 1/4 npt 1.13
First
Connection
npt - 3/4 npt npt - 3/8 npt _ 316 SST
npt - 1/2 npt npt - 3/8 npt 1.11
npt - 1 npt npt - 3/4 npt 1.00
npt - 3/4 npt npt - 1/2 npt 1.17
First
Connection
Second
Connection
Second
Connection
Length
in (cm) Material
(2.8)
(2.5)
(2.9)
Overall
Length
in (cm) Material
(2.8)
316 SST
316 SST
304 SST
316 SST
Socket Head Plug
Part No.
101748 Straight Pipe Plug -
101970 Straight Pipe Plug -
110208 Straight Pipe Plug -
Fitting
Conf.
Pipe or
Hose/
Tube
Fitting
Type Swivel
No No _ npt(m) npt - 3/8 npt _ 0.46
Socket
Head
No No _ npt(m) npt - 1/4 npt _ 0.41
Socket
Head
No No _ npt(m) npt - 1/8 npt _ 0.25
Socket
Head
JIC or
37º Flare
Pressure
Rating
Type of
Connection
First
Connection
Second
Connection
Overall
Length
in (cm) Material
304/316
(1.1)
(1.0)
(0.6)
SST
300 Series
SST
304/316
SST
82
Page 83
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Stainless Steel Fittings
Other Accessories
Tube Connector
Pipe or
Fitting
Part No.
513308 Straight Hose/
Conf.
Hose/
Tube
Tube
Fitting
Type Swivel
Tube
Connector
No No _ npt(m) x
JIC or
37º Flare
Pressure
Rating
Type of
Connection
Tube OD
Swivel Union
Pipe or
Fitting
Part No.
112268 Straight Pipe Union Ye s No 2250 psi
207152 Straight Pipe Union Ye s No 7250 psi
236433 Straight Pipe Union No No _ npt(m) x
236892 Straight Pipe Union Ye s No _ npt(m) x
16P309 Straight Pipe Union Ye s No 6000 psi
Conf.
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(155 bar)
(499 bar)
(413 bar)
Type of
Connection
npt(m) x
npt(f)
npt(f) x
nps(f)
nps(f)
nps(f)
npt(f) x
nps(f)
First
Connection
npt - 1/4 npt Tube OD -
First
Connection
npt - 3/4 npt npt - 3/4 npt 2.00
npt - 3/8 npt nps - 3/8
npt - 1 npt nps - 1
npt - 1/2 npt nps - 3/8
npt - 1/4 npt nps - 1/4
Second
Connection
.375
Second
Connection
npsm
npsm
npsm
npsm
Overall
Length
in (cm) Material
(5.1)
1.63
(4.1)
_ 303 SST
_ 316 SST
1.43
(3.6)
Overall
Length
in (cm) Material
_ SST
304/316
SST
316 SST
316 SST
Swivel
Part No.
189018 Straight Pipe Union Ye s No 7500 psi
236987 Straight Pipe Union Ye s No 7400 psi
Fitting
Conf.
Pipe or
Hose/
Tube
Fitting
Type Swivel
JIC or
37º Flare
Pressure
Rating
(516 bar)
(509 bar)
Type of
Connection
nps(m) x
nps(f)
nps(m) x
nps(f)
First
Connection
nps - 1/4
npsm
nps - 1/4
npsm
Second
Connection
nps - 1/4
npsm
nps - 1/4
npsm
Overall
Length
in (cm) Material
1.41
(3.5)
_ SST
303/316
SST
83
Page 84
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Hoses, Fittings, Swivels and Gauges
Fluid Gauges
Stainless Steel Low
Pressure Fluid Gauges
• Corrosion Resistant
• 2.5 in (63 mm) diameter dial
• 1/4 in NPT(M) connection
• Bottom mount
• Shatterproof glass
Part No. Pressure Range
187875 0-30 psi (0-2 bar)
187874 0-100 psi (0-7 bar)
187873 0-200 psi (0-14bar)
187876 0-300 psi (0-21 bar)
Stainless Steel High
Pressure Fluid Gauges
• Corrosion Resistant
• 2.5 in (63 mm) diameter dial
• 1/4 in NPT(M) connection
• Back mount
• Shatterproof glass
• Liquid filled to reduce indicator pulsation
Stainless Steel High
Pressure Fluid Gauges
• Corrosion Resistant
• 2.5 in (63 mm) diameter dial
• 1/4 in NPT(M) connection
• Bottom mount
• Shatterproof glass
• Liquid filled to reduce
indicator pulsation
Part No. Pressure Range
105770 0-1000 psi (0-68 bar)
102814 0-5000 psi (0-344 bar)
Stainless Steel Fluid Gauges
with Dampeners
• Dampener protects gauge
from severe pressure pulsation
• Corrosion Resistant
• 2.5 in (63mm) diameter dial
• 1/4 in NPT connections
Part No. Pressure Range
113641 0-3000 psi (0-207 bar)
113654 0-5000 psi (0-344 bar)
Air Gauges
Low Pressure Air Gauges
• Black enamel case
• Bottom mount
• 1/8 in NPT and 1/4 in NPT
connections
Part No. Pressure Range / Inlet
110436 0-100 psi (0-7 bar) 1/8 in NPT(M)
100960 0-200 psi (0-14 bar) 1/4 in NPT(M)
Part No. Pressure Range / Inlet
208855 0-300 psi (0-21 bar) 1/4 in NPT(M)
110182 0-2000 psi (0-140 bar) 1/4 in NPT(F)
206171 0-200 psi (0-140 bar) 1/4 in NPT(F)
Low Pressure Air Gauges
• Black enamel case
• Back mount
• 1/8 in NPT and 1/4 in NPT
connections
Part No. Pressure Range / Inlet
108190 0-100 psi (0-7 bar) 1/8 in NPT(M)
101689 0-200 psi (0-14 bar) 1/4 in NPT(M)
84
Page 85
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Other Accessories
Standard Gun Washer
Other Accessories
• Cleans 2 guns and 2 cups
• Plastic tank and reservoir
• Waterborne and non-waterborne compatibility options
• High quality Graco pump for reliability
• Air pressure operating range of 25 to 100 psi (1.7 to 7 bar)
• Maximum tank capacity of 5 gal (18.9 l)
• 112635 has hose wash capability
Ordering Information
Gun
Washer
Part No. Description* Part No. Quanitity Air Inlet
112634
(Economy)
• 112635
(Standard)
* Long gun support is used to clean pressure feed, air spray and HVLP guns;
Short gun support is used to clean siphone air spray, air-assist and airless guns;
Spray nozzle is used to clean siphon and pressure cups
• Waterborne compatible
Long gun support
Short gun support
Spray nozzle
Long gun support
Short gun support
Spray nozzle
512800
112847
512799
512800
112847
512799
1
1
2
2
1
1
1/2 npt(f) 1 in npt(m) 63 lb
1/2 npt(f) 1 in npt(m) 65 lb
Fluid
Drain
Valve
Kit Ordering Information
112635
Approx.
Dry
Weight Wetted Parts Manual
(28.6 kg)
(29.5 kg)
carbon steel, polyethylene (tank),
stainless steel, aluminum, brass,
PTFE, acetal
stainless steel, aluminum,
polyethylene (tank) brass,
PTFE, acetal
308393
308393
Kit
Part No.
236659 Graco Pro
Typically Used
to Clean
AA4500
air-assisted
electrostatic
guns
Kit Includes
Part No. Description
195903
188406
183459
236689
512835
512827
512802
Air cap blank
Tip housing
Washer (2)
PRO AA4500 support
Fluid inlet adapter
Plug
Wire trigger lock
Kit
Part No.
245271 Graco Pro Xs4
Typically Used
to Clean
AA electrostic
guns
Kit Includes
Part No. Description
198786
188406
183459
245300
512835
512827
512802
112851
Air cap blank
Housing tip
Washer (2)
Gun support
Fluid inlet adapter
Plug
Wire trigger lock
Snap clip
85
Page 86
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Other Accessories
Professional Gun Washer
Other Accessories
• Corrosion resistant materials
• Cleans 2 guns and 2 cups in one minute
• Cleans hoses and 5 gallon cans
• Pot cleaning kit available
• Flow-through brush/wand for manual cleaning
• Air pressure operating range of 25 to 100 psi (1.7 to 7 bar)
• Maximum tank capacity of 5 gal (18.9 l)
• Fume extractor
• Automatic timer
• FM Approved
Ordering Information
Gun
Washer
Part No. Description* Part No. Quanitity Air Inlet
• 117438
(Premium)
* Long gun support is used to clean pressure feed, air spray and HVLP guns;
Short gun support is used to clean siphone air spray, air-assist and airless guns;
Spray nozzle is used to clean siphon and pressure cups
• Waterborne compatible
Kit Ordering Information
Kit
Part No.
236659 Graco Pro
Long gun support
Short gun support
Spray nozzle
Typically Used
to Clean
AA4500
air-assisted
electrostatic
guns
512800
112847
512799
Kit Includes
Part No. Description
195903
188406
183459
236689
512835
512827
512802
Air cap blank
Tip housing
Washer (2)
PRO AA4500 support
Fluid inlet adapter
Plug
Wire trigger lock
117438
Fluid
Drain
Valve
2
1
1
1/4 npt(f) 1 in npt(m) 86 lb
Kit
Part No.
245271 Graco Pro Xs4
Approx.
Dry
Weight Wetted Parts Manual
(39 kg)
Typically Used
to Clean
AA electrostic
guns
stainless steel, brass,
PTFE, acetal
Kit Includes
Part No. Description
198786
188406
183459
245300
512835
512827
512802
112851
308393
Air cap blank
Housing tip
Washer (2)
Gun support
Fluid inlet adapter
Plug
Wire trigger lock
Snap clip
86
Page 87
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Other Accessories
Fluid Heater Kit
Other Accessories
• Variable heating levels for consistent viscosity control
• Approved for hazardous locations
• 7250 psi (500 bar) maximum working pressure
• Stainless steel construction is compatible with catalyst,
waterborne, and other finishing materials
• Includes bracket, hose, and fittings for easy integration
Ordering Information
Part No. Description
239850 120V fluid heater kit (includes bracket, hose, fittings)
239851 240V fluid heater kit (includes bracket, hose, fittings)
239852 240V fluid heater kit (includes hose, fittings)
241883 200V fluid heater kit (includes bracket, hose, fittings)
Instruction manual 308771.
Kits (For President 3:1 Circ Pkgs)
Part No. Description
Hazardous Location Fluid Heaters, Series A
245848 120 VAC single phase, 2300 watts, 19.2 amps
245862 200 VAC single phase, 4000 watts, 20 amps
245863 240 VAC single phase, 4000 watts, 16.7 amps
246254 380 VAC single phase, 4000 watts, 10.5 amps
245864 480 VAC single phase, 4000 watts, 8.3 amps
Non-Hazardous Location Fluid Heaters, Series A
245867 120 VAC single phase, 2300 watts, 19.2 amps
245868 200 VAC single phase, 4000 watts, 20 amps
245869 240 VAC single phase, 4000 watts, 16.7 amps
246276 380 VAC single phase, 4000 watts, 10.5 amps
245870 480 VAC single phase, 4000 watts, 8.3 amps
87
Page 88
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Other Accessories
Siphon Kits
Other Accessories
Siphon Kits, Tubes, Filters and Intake Extensions
5 gal (19 l) Siphon Kits
Description/
Part No.
206268 CS 3/4 npt(m) Nylon 3/4 (19) 3.5 (1.0) Aluminum 18 (457)
207484 CS 3/4 npsm(f) Nylon 3/4 (19) 3.5 (1.0) Aluminum 18 (457) Pail
208920 CS 3/4 npsm(f) Nylon 1.0 (25) 4.0 (1.2) Aluminum 15 (381) Pail
223105 SST 3/4 npt(m) Nylon 3/4 (19) 6.0 (1.8) Aluminum 18 (457)
237068 CS 2.0 npt(m) Nylon 1.0 (25) 6.0 (1.8) Aluminum 18 (457) 308415
241634 SST 3/8 JIC LDPE 0.37 (9.4) 4.0 (1.2) 304 SST 17 (432) 308994
243832 SST 1/2 npsm(f) LDPE 0.37 (9.4) 3.0 (0.9) 304 SST 17 (432) 309106
244675 CS 3/8 npsm(f) LDPE 0.37 (9.4) 4.0 (1.0) Aluminum 17 (432)
245082 244675 with rock
245083 241634 with rock
245176 CS 1-1/4 npt(f) LDPE 1.0 (25) 6 (1.8) Aluminum 18.25 (464)
24B337 Merkur cart 3/4 NT PTFE 0.625 (15.9) 4.0 (1.0) 304 SST 18 (457)
24B338 Merkur cart 3/4 NT PTFE 0.875 (22.2) 4.0 (1.0) 304 SST 18 (457)
24B424 Merkur wall 3/4 NT PTFE 0.625 (15.9) 4.0 (1.0) 304 SST 18 (457)
24B425 Merkur wall 3/4 NT PTFE 0.875 (22.2) 4.0 (1.0) 304 SST 18 (457)
Material Inlet Thread
3/8 npsm(f) LDPE 0.37 (9.4) 4.0 (1.0) Aluminum 17 (432)
catcher
3/8 JIC LDPE 0.37 (9.4) 4.0 (1.2) 304 SST 17 (432)
catcher
Hose
Tube
Material
Hose ID in
(mm)
Hose
Length
ft (m)
Suction
Tube
Material
Suction Tube
Length
in (mm) Use Manual
88
Page 89
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Other Accessories
Siphon Kits
Other Accessories
Siphon Kits
55 gal (208 l) Siphon Kits
Description/
Part No.
203992 low level shut off/CS 1-1/2 npt(m) Buna 3/4 (19) 6 (1.8) CS 36 (914) Drum 306508
207485 with ball check/CS 3/4 npsm(f) Nylon 3/4 (19) 6 (1.8) CS 36 (914) Drum
208259 CS 3/4 npsm(f) Nylon 3/4 (19) 6 (1.8) CS 36 (914) Drum
222916 CS 2 npt(m0 Polyethylene 1.5 (38) 8 (2.4) CS 36 (914) Drum 308081
223009 with screen filter/CS 3/4 npt(m) Nylon 3/4 (19) 6 (1.8) CS 36 (914) Drum
224834 Husky 307 drum
235502 Husky 307 wall
236951 CS 1 npt(m) Nylon 3/4 (19) 6 (1.8) CS 36 (914)
241321 CS 1 npsm(f) Nylon 3/4 (19) 6 (1.8) CS 36 (914)
245084 244677 with strainer 3/8 npsm(f) LDPE .037 (9.4) 6 (1.8) Aluminum 38 (965)
245085 244676 with strainer 3/8 JIC(f) LDPE .037 (9.4) 6 (1.8) 304 SST 38 (965)
244676 Triton/SST 3/8 JIC(f) LDPE .037 (9.4) 6 (1.8) 304 SST 38 (965)
244677 Triton/CS 3/8 npsm(f) LDPE .037 (9.4) 6 (1.8) Aluminum 38 (965)
685599 SST 3/4 npt(f) Nylon 3/4 (19) 6 (1.8) 304 SST 34 (864)
24A954 Merkur drum Nylon 3/4 (19) 5 (1.5) 304 SST 42 (1067)
24A598 Merkur drum Mylon 1 (25.4) 5 (1.5) 304 SST 41 (1041)
Material Inlet Thread
3/8 npt(m) NA NA NA Acetal 34.75 (883)
mount kit/Acetal
3/8 npt(m) Polypropylene 3/8 (9.5) 6 (1.8) Polypropylene 38 (965)
mount
Hose Tube
Material
Hose ID in
(mm)
Hose
Length
ft (m)
Suction Tube
Material
Suction Tube
Length
in (mm) Use Manual
Siphon Tubes
Part No.
165767 3⁄4 npt(f) 18.0 (450) 7/8 in Pail
206266 3⁄4 npt(f) 37.0 (940) 1-1/2 in Drum
170113 3⁄4 in dia.* 18.0 (450) .840 in Pail
166630 1 npt(mbe) 30.0 (762) 1-5/16 in Drum
246419 1 npt 37.0 (940) 1-1/2 in Drum
*Non-threaded: 101818 hose clamp required.
Outlet Size
in
Length
in (mm) OD Size Use
89
Page 90
Finishing Accessories
Pressure Regulators
Air Prep & Controls
Agitators
Pressure Pots
Contents
Filters
Surge Suppressors
Hoses, Fittings,
Swivels & Gauges
Other
Other Accessories
Ground Clamp
Other Accessories
• Properly ground equipment to prevent sparks
or other hazards.
• Ground work piece to maximize transfer
efficiency with electrostatic guns.
• Spring-loaded clamp with sharp teeth ensure
proper connection.
238909
• Up to 16 feet long when fully uncoiled.
Easily reach and move your work piece.
Ordering Information
Part No. Description
238909 Coil extends 16 ft
14 GA wire
90
Page 91
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
GRACO LOCATIONS
MAILING ADDRESS
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612-623-6000
Fax: 612-623-6777
AMERICAS
MINNESOTA
Worldwide Headquarters
Graco Inc.
88 -11th Avenue N.E.
Minneapolis, MN 55413
EUROPE
BELGIUM
European Headquarters
Graco N.V.
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32 89 770 700
Fax: 32 89 770 777
ASIA PACIFIC
AUSTRALIA
Graco Australia Pty Ltd.
Suite 17, 2 Enterprise Drive
Bundoora, Victoria 3083
Australia
Tel: 61 3 9468 8500
Fax: 61 3 9468 8599
CHINA
Graco Hong Kong Ltd.
Shanghai Representative Office
Building 7
1029 Zhongshan Road South
Huangpu District
Shanghai 200011
The People’s Republic of China
Tel: 86 21 649 50088
Fax: 86 21 649 50077
INDIA
Graco Hong Kong Ltd.
India Liaison Office
Room 443, Augusta Point
Regus Business Centre 53
Golf Course Road
Gurgaon, Haryana
India 122001
Tel: 91 124 435 4208
Fax: 91 124 435 4001
JAPAN
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81 45 593 7300
Fax: 81 45 593 7301
KOREA
Graco Korea Inc.
Shinhan Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-si, Korea 431-060
Tel: 82 31 476 9400
Fax: 82 31 476 9801
SALES/
DISTRIBUTION/
SERVICE
North America
Customer Service
800-328-0211
Fax 877-340-6427
Call today for product information or to request a demonstration.
877-84GRACO (1-877-844-7226) or visit us at www.graco.com.
Graco Inc. is registered to I.S. EN ISO 9001
©2015 Graco Inc. Electronic Only 01/15 All written and visual data contained in this document are based on the latest product information available at the time
of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and
are trademarks of their respective owners.
Loading...