Graco 345009EN User Manual

Pro Xs™ Auto

Automatic Electrostatic Guns

Pro Xs Auto guns offer excellent finish quality and material savings, with the added benefit of easy modular installation

• Air Spray models include standard, high conductivity and waterborne available with external charge

• Air-Assist models for high pressure, ﬁne ﬁnish spraying

• Improve production speeds, transfer efﬁciency and overall ﬁnish when you upgrade from conventional guns

• Easy installation with air-powered design – Attach ﬂuid and air connections and you’re ready to spray in minutes

• Lower cost of ownership with Graco’s 3-year warranty, ease of repair and durable components

Technical Specifications

Pro Xs Auto Pro Xs Auto AA Pro Xs Auto WB

Max. working fluid pressure 100 psi (7 bar, 0.7 MPa) 3000 psi (207 bar, 20.7 MPa) 100 psi (7 bar, 0.7 MPa)

Max. working air pressure 100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa)

Gun weight 3.52 lb (1.60 kg) 3.52 lb (1.60 kg) 3.40 lb (1.54 kg)

Gun length 12.25 in (31.1 cm) 12.25 in (31.1 cm) 10.40 in (26.4 cm)

Voltage output 85 kilovolts 85 kilovolts 60 kilovolts

(fittings are included with gun)

Air Inlet

Atomizing air Fan air Cylinder pilot Hi-lo voltage selector Turbine air

Fluid inlet 1/4-18 npsm 1/4-18 npsm 1/4-18 npsm

Wetted parts SST, nylon, PEEK, UHMWPE, acetal SST, nylon, PEEK, UHMWPE, carbide, acetal SST, nylon, PEEK, UHMWPE, acetal

Instruction manual 309297

3/8 in OD nylon tube 3/8 in OD nylon tube 5/32 in OD nylon tube 5/32 in OD nylon tube 1/4 npsm (l.h.)

309457 (for waterborne coatings)

3/8 in OD nylon tube N/A 5/32 in OD nylon tube 5/32 in OD nylon tube 1/4 npsm (l.h.)

309298 313227

3/8 in OD nylon tube 3/8 in OD nylon tube 5/32 in OD nylon tube 5/32 in OD nylon tube 1/4 npsm (l.h.)

Ordering Information

244589 Pro Xs Auto Standard

Air spray gun with a 1.5 mm fluid nozzle and 24A438 air cap for a high quality finish. Includes a mounting bracket and gun manifold. Grounded air hose must be ordered separately.

244590 Pro Xs Auto High Conductivity

Air spray gun for spraying low resistivity materials. Includes H.C. fluid tube, mounting bracket, gun manifold and 1.5 mm fluid nozzle and 24A438 air cap. Grounded air hose must be ordered separately.

244591 Pro Xs Auto Waterborne

Air spray gun for spraying waterborne materials with an isolation system. Includes mounting bracket, gun manifold and 1.5 mm fluid nozzle and 24A276 air cap. Waterborne fluid hose (includes fluid tube and gun fittings) and grounded air hose must be ordered separately.

24A206 Pro Xs Auto Waterborne External Charge Gun

External charge air spray gun for spraying waterborne materials with an isolation system. Includes two external charging probes, mounting brackets, gun manifold and 24A276 air cap. Grounded air hose must be ordered separately.

244592 Pro Xs Auto Air-Assist

Air-assist gun for high pressure spraying. Includes mounting brackets, gun manifold and a tip of choice. Grounded air hose must be ordered separately.

Accessories

A wide variety of accessories are available. Refer to the following list of manuals for options and part numbers: 309297 Pro Xs Auto Air Spray Gun Manual 309457 Pro Xs Auto Air Spray Gun Manual for Waterborne Coatings 309298 Pro Xs Auto Air-Assist Gun Manual 313227 Pro Xs Auto WB External Charge Gun Manual

Pro Xs Auto Air Spray Gun

Pro Xs Auto Waterborne External Charge Gun

Pro Xs Auto Air-Assist Gun

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.graco.com.