Graco 344893EN-A User Manual

Merkur® ES

Parts Breakout

24C853 G15 Air-Assist Gun

24C855 G40 Air-Assist Gun

235460 Silver Plus Airless Gun

15T499 Air Regulator

108190 Regulator Gauge

REPAIR KITS

24H006 Plated Steel Pump Repair Kit

24G705 SST Pump Repair Kit

24A537 Air Valve Repair Kit

241811 25 ft (7.5 m) Air Hose

24F165 25 ft (7.5 m) Fluid Hose with

Plated Steel Fittings

24F166 25 ft (7.5 m) Fluid Hose with

SST Fittings

24F160 Suction Strainer –

Pack of 3

ACCESSORIES

24F147 Suction Tube for 1 Gallon

(3.8 l) Pail

24F271 Stainless Steel Inline Fluid Filter

24F272 Plated Steel Inline Fluid Filter

193199 Gauge Lens Covers

24H005 Hose Clips – Pack of 7

SPRAY TIP SELECTION CHART

AAM Air-Assist Spray Tip Selection Chart

Fine Finish Tips recommended for high ﬁnish quality applications at low and medium pressures.

Order desired tip (part no. AAMxxx) from matrix below. xxx = 3 digit number below Maximum Pattern Width. (Example: AAM409)

Fluid Output, ﬂ oz/min (lpm) Maximum Pattern Width at 12 in (300 mm)

Oriﬁce Size in (mm)

0.007 (0.178) 4.0 (0.1) 5.2 (0.15) 207 307

0.009 (0.229) 7.0 (0.2) 9.1 (0.27) 109 209 309 409 509

0.011 (0.279) 10.0 (0.3) 13.0 (0.4) 111 211 311 411 511 611

0.013 (0.330) 13.0 (0.4) 16.9 (0.5) 213 313 413 513 613 713

0.015 (0.381) 17.0 (0.5) 22.0 (0.7) 215 315 415 515 615 715 815

0.017 (0.432) 22.0 (0.7) 28.5 (0.85) 217 317 417 517 617 717 817 917

0.019 (0.483) 28.0 (0.8) 36.3 (1.09) 219 319 419 519 619 719 819 919

AAF Air-Assist Fine Finish Pre-Oriﬁce Spray Tip Selection Chart

Fine Finish Tips recommended for high ﬁnish quality applications at low and medium pressures. AAF tips have a pre-orﬁce which assists in atomizing shear thinning materials, including waterbornes and lacquers.

Order desired tip (part no. AAFxxx) from matrix below.

at 600 psi

(4.1 MPa, 41 bar)

at 1000 psi

(7.0 MPa, 70 bar)

2 to 4

(100)

4 to 6

(150)

6 to 8

(200)

8 to 10

(250)

10 to 12

(300)

12 to 14

(350)

14 to 16

(400)

16 to 18

(450)

18 to 20

(500)

Fluid Output, ﬂ oz/min (lpm) Maximum Pattern Width at 12 in (305 mm)

Oriﬁce Size in (mm)

0.011 (0.279) 9.5 (0.28) 12.5 (0.37) 310 410 510 610 710

0.013 (0.330) 12.0 (0.35) 16.0 (0.47) 312 412 512 612 712

0.015 (0.381) 16.0 (0.47) 21.0 (0.62) 414 514 614 714

0.017 (0.432) 20.0 (0.59) 26.5 (0.78) 416 516 616 716

at 600 psi

(4.1 MPa, 41 bar)

at 1000 psi

(7.0 MPa, 70 bar)

6 to 8

(200)

8 to 10

(250)

10 to 12

(300)

12 to 14

(350)

14 to 16

(400)

163xxx Silver Fine Finish Spray Tip Selection Chart

Order desired tip (part no. 163xxx) from matrix below.

Oriﬁce Size in (mm)

Fan Width in (mm)

2-4 (51-102) 107 109 111 113 115 117 119

4-6 (102-152) 207 209 211 213 215 217 219

6-8 (152-203) 307 309 311 313 315 317 319

8-10 (203-254) 407 409 411 413 415 417 419

10-12 (254-305) 509 511 513 515 517 519

12-14 (305-356) 609 611 613 615 617 619

14-16 (356-406) 711 713 715 717 719

16-18 (406-457) 813 815 817 819

18-20 (457-508) 917 919

Flow Rate gpm (lpm)

0.007

(0.178)

0.053 (0.20) 0.087 (0.33) 0.13 (0.49) 0.18 (0.69) 0.24 (0.91) 0.31 (1.17) 0.39 (1.47)

0.009

(0.228)

0.011

(0.280)

0.013

(0.330)

0.015

(0.381)

0.017

(0.432)

(0.483)

0.019

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.graco.com.