Page 1
Merkur® ES
Air-Assist and Airless Spray Packages
• Quick flush system requires less than 1 minute to flush
• 45% less material to fill the system than the leading competitors
• 2 to 10 years of proven reliability on key system components
• Delivers a superior, consistent spray finish
Page 2
MERKUR® ES
Need Efficiency and Excellent Spray Performance?
Graco’s Merkur ES has it!
Designed to use less material than the competition and to reduce air usage
and pulsation, the Merkur ES is one Efficient Sprayer.
• Quick flush system reduces material and solvent usage
• Durable, proven reliable air motor, pump lower and key
components mean less downtime
• Low profile spray package makes it easy to transport
• Delivers high transfer efficiency with a consistent, superior finish
1/8” Fluid Hose
• Reduces material
and solvent usage
• Lightweight and flexible
for operator convenience
Suction Hose or Hopper
• Suction hose has a small diameter for reducing material usage
• Hopper contains 2 liters (0.5 gal) for small batch jobs
FLEXIBLE, EFFICIENT SYSTEMS
15:1 air-assist
stand mount
15:1 air-assist
wall mount
15:1 air-assist
stand mount with hopper
30:1 air-assist
stand mount
Page 3
Long-Lasting Efficiency in a Compact, High Performance Package
G15/G40 Spray Gun
• Delivers superior spray performance
• Maximizes operator comfort with ergonomic design
Control Panel
• Easily set and monitor air controls
• Integrated carrying handle for easy transporting
Air Motor
• Provides consistent finishes with smooth, rapid changeover
• Minimizes air usage
Pump Mount
• Converts from stand mount to wall mount
Gun Hook
• Located on both sides of pump stand
for flexibility
Pump Lower
• Over 10 years of proven reliability
• Available in plated or stainless steel
30:1 air-assist
wall mount
30:1 air-assist
stand mount with hopper
30:1 airless
stand mount
30:1 airless
wall mount
Page 4
Merkur ES Ordering Information
Accessories
Gun
™
Plated Steel
Stainless Steel
Wall Mount
Stand Mount
G15 Gun
G40 Gun
Silver Plus
Part No.
Merkur ES 15:1 Air-Assist Packages
24F150 • • • •
24F151 • • • •
24F158 • • • •
24F159 • • • •
24W281 • • • •
24W283 • • • •
Merkur ES 30:1 Air-Assist Packages*
24F152 • • • •
24F153 • • • •
24F156 • • • •
24F157 • • • •
24W285 • • • •
24W287 • • • •
*All Air-Assist Packages include a 25 ft (7.5 m) fluid hose and air hose and an AAF412 tip
Merkur ES 30:1 Airless Packages**
24F154 • • • •
24F155 • • • •
**All Airless Packages include a 25 ft (7.5 m) fluid hose and a 163515 tip
Suction Hose
24F271 Inline fluid filter, stainless steel
24F272 Inline fluid filter, plated steel
Hopper (2 liter)
24F165 1/8” ID fluid hose, 25 ft (7.5 m), plated steel
24F166 1/8” ID fluid hose, 25 ft (7.5 m), stainless steel
24F147 Suction tube for 1 gal (3.7 l) pail, stainless steel
24F148 Suction hose 3/8” OD for 5 gal (18.9 l) pail
24F149 Suction hose 5/8” OD for 5 gal (18.9 l) pail
17A493 2 liter (0.5 gal) Hopper kit attaches to wall
or stand mount
17C166 Bungee cord for attaching hopper lid
Merkur ES Technical Specifications
Maximum fluid working pressure
15:1 pumps................................................. 1500 psi (10.3 MPa, 103 bar)
30:1 pumps................................................. 3000 psi (20.7 MPa, 207 bar)
Maximum cycle rate ..................................................240 cycles per minute
Maximum tip orifice size ................................................0.019 in (0.483 mm)
Fluid flow @ 240 cpm ....................................................0.4 gpm (1.5 lpm)
Volume per cycle ............................................................ 0.2 oz (6 cc)
Maximum air inlet pressure ..........................................100 psi (0.7 MPa, 7.0 bar)
Air consumption @ 100 psi @ 90 cpm (0.7 MPa, 7.0 bar)
15:1 ........................................................................4 scfm
30:1 ........................................................................7 scfm
Package air inlet size. ...........................................................3/8 npt(f)
Package fluid outlet size ......................................................1/4 npsm(m)
Wetted parts
Plated steel pumps .................................. SST, CS, nickel plating, tungsten carbide,
PTFE, acetal, leather, UHMWPE
Stainless steel pumps .......................SST, tungsten carbide, PTFE, acetal, leather, UHMWPE
Minimum compressor size..........................................................1.5 HP
Instruction manual...............................................................3A0732
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
Call today for product information or to request a demonstration.
877.84GRACO (1-877-844-7226) or visit us at www.graco.com/finishing
©2014 Graco Inc. Form No. 344878 Rev. E 11/14 Printed in the U.S.A.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Loading...