Graco 344831EN-C User Manual

AAF Fine Finish Tips

A Complete Line of Air-Assist Tips

• AAF tips are designed for G15/G40 manual guns and G40 automatic Air-Assist spray guns

• Pre-oriﬁce assists in atomizing shear thinning materials, including waterbornes and lacquers

• Pre-oriﬁce allows for lower pressure settings, reducing overspray, increasing transfer efﬁciency, and increasing tip life

• Combined with the aircap, the tip delivers a soft spray

• Reduced internal volume prevents material buildup on the tip

TIPS

for

Fine

Finish

G15/G40 Manual Guns G40 Automatic Gun

Ordering Information

Fine Finish Pre-Oriﬁce Spray Tips Selection Chart

Recommended for high ﬁnish quality applications at low and medium pressure. AAF tips have a pre-oriﬁce which assists in atomizing shear thinning materials, including lacquers. Order desired tip (part no. AAFxxx).

*Fluid Output, ﬂ oz/min (lpm) Maximum Pattern Width at 12 in (305 mm)

Oriﬁce Size in (mm)

0.009 (0.228) 7.0 (0.20) 8.5 (0.25) 208 308 408

0.011 (0.279) 9.5 (0.28) 12.5 (0.37) 210 310 410 510 610 710

0.013 (0.330) 12.0 (0.35) 16.0 (0.47) 212 312 412 512 612 712

0.015 (0.381) 16.0 (0.47) 21.0 (0.62) 414 514 614 714

0.017 (0.432) 20.0 (0.59) 26.5 (0.78) 416 516 616 716

*Tips are tested in water

AAM and GG4 tip lines are also available for the G15/G40 Air-Assist Spray Guns.

For more information visit www.graco.com/ﬁnishing or call 1-877-844-7226

at 600 psi

(4.1 MPa, 41 bar)

at 1000 psi

(7.0 MPa, 70 bar)

4 to 6

(150)

6 to 8

(200)

8 to 10

(250)

10 to 12

(300)

12 to 14

(350)

14 to 16

(400)