Graco 344830EN-B User Manual

Expanding Blade Agitator

Air Driven Expanding Blade Bung-Mounted Agitator

Quick install, expanding blade mixer for sealed drums or tanks

• SST construction

• Standard 1-1/2 and 2 inch bung connections

• Adjustable blade design for positioning within the tank

• Simple screw in installation

• Includes angle adapter

Target Applications

• Foam

• Polyurea

• General Finishing

• For any sealed container with 1-1/2 inch or 2 inch bung access

Ordering Information

Includes angle adapter for reduced vortexing and off center mounting

24C728 Low Viscosity, 1 HP 24C729 High Viscosity, 1.75 HP

Accessories

Use the blade assembly kits to customize your conﬁguration and meet the needs of your speciﬁc application

24C860 Small Blade Assembly Kit 24C861 Large Blade Assembly Kit

Adapters

16H294 Angle Adapter

16H295 Angle Adapter Locking Ring

Technical Speciﬁcations

Maximum air input pressure .......................................100 psi (7 bar, 0.7 MPa)

Maximum recommended agitator speed ........................................... 500 rpm

Air consumption at 400 rpm with 100 psi (0.7 MPa, 7 bar)

air inlet pressure

Model 24C728 (low viscosity) ................................12 scfm (0.34 m3/min)

Model 24C729 (high viscosity) ...............................22 scfm (0.62 m3/min)

Noise Level at 100 psi (0.7 MPa, 7 bar), maximum load*

Model 24C728 (low viscosity)

Pressure .................................................................................... 72.32 dB

Power ........................................................................................... 80 dB

Model 24C729 (high viscosity)

Pressure .................................................................................... 75.74 dB

Power ...................................................................................... 82.32 dB

Wetted Parts ..............................................303, 18-8, and 304 stainless steel

Bung adapter thread sizes .........................1 1/2-11.5 npsm and 2-11.5 npsm

Weight

Model 24C728 (low viscosity) ................................................ 9.6 lb (4.4 kg)

Model 24C729 (high viscosity) .............................................13.1 lb (5.9 kg)

*Tested in water to ISO 9614-2

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.graco.com.