Graco 344816EN-B User Manual

Graco Ink Pumps

Long-Lasting Piston Pumps with Sealed Wet Cup

Sealed Wet Cup

Extend the service life of your pump

• Prolonged seal life with enclosed, dual seal wet cup

• Runaway control with optional DataTrak

• MaxLife® seal for longer life

• Handles the most difficult inks

• Available with hydraulic or pneumatic motors

™

Technical Specifications

Stroke length .............................................. Pneumatic: 4.75 in (120.65 mm)

Hydraulic: 4.69 in (119.13 mm)

Maximum ﬂuid operating temperature .......... 180°F (82.3°C)

Air or Hydraulic Inlet Size ............................. 3/4 npt(f)

Fluid outlet size ........................................... 200 cc displacement pump: 1 npt(f)

500 cc displacement pump: 1-1/2 npt(m)

Maximum pump speed ................................. 60 cpm

(Do not exceed maximum recommended speed of ﬂuid pump, to prevent premature pump wear)

DataTrak

Maximum Air or

Ink Pump

Package

Part No. Series Ratio DataTrak

258744 A 14:1 Air 500 cc 100 (0.7, 7.0) 1400 (9.7, 97)

258745 A 14:1 x Air 500 cc 100 (0.7, 7.0) 1400 (9.7, 97)

258746 A 14:1 x Air 500 cc 100 (0.7, 7.0) 1400 (9.7, 97)

258747 A 23:1 Air 200 cc 100 (0.7, 7.0) 2300 (15.9, 159)

258748 A 23:1 x Air 200 cc 100 (0.7, 7.0) 2300 (15.9, 159)

258749 A 23:1 x Air 200 cc 100 (0.7, 7.0) 2300 (15.9, 159)

258750 A 26:1 Air 500 cc 100 (0.7, 7.0) 2600 (17.9, 179)

258751 A 26:1 x Air 500 cc 100 (0.7, 7.0) 2600 (17.9, 179)

258752 A 26:1 x Air 500 cc 100 (0.7, 7.0) 2600 (17.9, 179)

258753 A 1.6:1 Hydraulic Oil 500 cc 1500 (10, 103) 2300 (15.9, 159)

Remote

DataTrak

Power

Source

Displacement

Pump Size

Hydraulic Input

Pressure psi

(MPa, bar)

™

Provides runaway pump protection• Allows for real time monitoring for • preventative maintenance

Maximum Fluid

Working Pressure

psi (MPa, bar)

Air Motor Conversion Kits

Part No. Description

24C743 To install a L200CM Check-Mate displacement pump on an existing King air motor

24C744 To install a L500CM Check-Mate displacement pump on an existing King air motor

24D625 To install a L500CM Check-Mate displacement pump on an existing Viscount II hydraulic motor

ADDITIONAL INK SOLUTIONS

Viscount® II 3100

on 55 gallon RAM

President® 10:1

450 Cart Mount

RAM PACKAGES AIR-OPERATED DOUBLE DIAPHRAGM PUMPS

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Husky™ 307

3/8 inch Pump

Husky 515

1/2 inch Pump

Husky 1050

1 inch Pump Family

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.graco.com.