Page 1
Heavy-Duty In-Drum
Back-Geared Agitator
Reliable, Leak-Free Operation
Leak-free
Design
Quick connect heavy-duty back-geared agitator for drums or tanks with
pre-installed blades
• ATEX approval for hazardous locations
• Oil free gear box elimates material contamination
• Interchangeable adapters and couplers to fit a variety of drum designs
• Simple screw in installation
• Corrosion resistant stainless steel construction
• Available in either 1.5 inch or 2 inch bung sizes, with shaft adapters
Page 2
Technical Specifications
Maximum air input pressure ............................................... 100 psi (7 bar)
Motor power rating at 1200 rpm (shaft at 50 rpm),
Using 12 cfm (0.34 m3/min) ....................................0.25 hp (186 W)
Maximum recommended shaft rpm ..................................................... 100
Gear reducer ratio ............................................................................ 24:1
Weight .............................................................................. 17.7 lb (8 kg)
Height
From top of air motor to base of quick connect ..... 11.25 in (286 mm)
Air inlet ................................... Mates with 1/4-in npt(f) quick-disconnect,
Part No 208536
Wetted parts ............................................................................... 303 SST
Air consumption ..................................3 to 30 scfm (0.08 to 0.85 m3/min)
Sound data*
Typical operating conditions†
Sound power .................................................................. 77.3 dB(A)
Sound pressure .............................................................. 63.8 dB(A)
Maximum noise conditions‡
Sound power ................................................................. 86.4 dB(A)
Sound pressure ............................................................. 72.9 dB(A)
*Sound data was measured per ISO 3744-1981.
† 50 rpm (shaft) agitating 300 cps water-base material
‡100 rpm (shaft) agitating an empty container
Ordering Information
24C293: 1.5 inch bung model
Includes heavy duty agitator drive,
plus 2 adapters for 4 different shaft
sizes (3/8, 7/16, 1/2 and 5/8 inch)
24C522: 2 inch bung model
Includes heavy duty agitator drive,
plus 2 adapters for 4 different shaft
sizes (3/8, 7/16, 1/2 and 5/8)
Accessories
Bung Adapters
16A521 1.5 inch bung adapter
16A754 2 inch bung adapter
Shaft Adapters
16H554 3/8 inch and 7/16 inch shaft adapter
16H555 1/2 inch and 5/8 inch shaft adapter
Speed Controller
24G621 Agitator Speed Controller
Controls and maintains agitator
speed regardless of drum level
or viscosity changes
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
Call today for product information or to request a demonstration.
877.84GRACO (1-877-844-7226) or visit us at www.graco.com.
©2011 Graco Inc. 344809 Rev. C 09/11 Printed in the U.S.A.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Loading...