Graco 340264EN-F User Manual
Process Solutions
• Max flow: 2.1 gpm
(7.9 lpm)
• Ideal for chemical
metering applications
Husky 716
• 3/4 in (19.1 mm) connection
• Max flow: 16 gpm (61 lpm)
• Aluminum, stainless steel
1:1 Fast-Flo
• Max flow: 5 gpm
(19 lpm)
• UL options available
• Max flow: 6.2 gpm
(23.6 lpm)
• Typically used for
chemical metering &
sanitary applications
Husky 1050
• 1 in (25.4 mm) connection
• Max flow: 50 gpm (189 lpm)
• Aluminum, polypropylene,
conductive polypropylene,
PVDF, stainless steel, hastelloy
®
• Max flow: 19.5 gpm
(73.8 lpm)
• Ideal for abrasive material
transfer applications
Husky 1590
• 1-1/2 in (38.1 mm) connection
• Max flow: 90 gpm (340 lpm)
• Polypropylene, PVDF, aluminum,
stainless steel
Priming Piston
Ink Pump
• Enclosed, dual
seal wet cup for
longer seal life
• Runaway control
with optional
DataTrak™
Husky™ 205EP2 Hose Pump EP3 Hose Pump EP4 Hose Pump
• 1/4 in (6.3 mm) connection
• Max flow: 5 gpm (19 lpm)
• Polypropylene, acetal, PVDF
Husky 2150
• 2 in (50.8 mm) connection
• Max flow: 150 gpm (568 lpm)
• Polypropylene, PVDF, aluminum,
stainless steel, iron
Hydraulic
Ink Pump
• Up to 3 times more
efficient than
pneumatic pumps
• Typical applications:
- Letterpress inks
- Lithographic inks
Husky 307
• 3/8 in (9.4 mm) connection
• Max flow: 7 gpm (26 lpm)
• Polypropylene, acetal
Husky 515
• 1/2 in (12.7 mm) connection
• Max flow: 15 gpm (57 lpm)
• Polypropylene, acetal, PVDF
Husky 3300
• 3 in (76.2 mm) connection
• Max flow: 300 gpm (1135 lpm)
• Polypropylene, aluminum,
stainless steel
Hydra-Clean
• High pressure cleaning
and sanitizing
• Air-operated for hazardous
or confined areas
• 10:1, 12:1, 23:1, 30:1 or
45:1 ratio options
• Available in wall, cart
or drum mount packages
®
877.84GRACO (1-877-844-7226) or visit us at www.graco.com/process
There are
NO EQUALS
SaniForce
®
Air-Operated Double Diaphragm Pumps
• Maximum flow rates to 150 gpm (567 lpm)
• Tri-clamp connections
• Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa)
• Durable, lube-free non-sticking air valve
High Sanitation Diaphragm Pumps
• Maximum flow rates to 150 gpm (567 lpm)
• Durable, lube-free non-sticking air valve
• Interchangeable flapper and ball checks
3A High Sanitation Diaphragm Pumps
• Maximum flow rates to 150 gpm (567 lpm)
• Fluid pressure up to 120 psi (8.4 bar, 0.84 MPa)
• Quick knockdown design for easy cleaning
and draining
• Interchangeable flapper and ball checks
• Leak detection
Bin Evacuation Systems™ (BES) Drum Unloaders
• Evacuate materials from 300 gallon (1,135 l)
containers without adding water
• Inflatable wiper seals for increased efficiency
and faster change-out of bins
• Available with two sanitary diaphragm pumps or
up to four sanitary piston pumps
• Pneumatic or electronic control options
Piston Pumps
• Fluid transfer and supply of low to medium
viscosity fluids
• Flow rates ranging from 1.5 to 14 gpm
(5.7 to 53 lpm)
• Double-ball and priming piston designs
• Unload materials from straight-sided or tapered drums
• Inflatable wiper seals for increased efficiency
and faster change-out of drums
• Liner guard to prevent bags from entering pump
• Sanitary flange clamps for quick disassembly
877.84GRACO (1-877-844-7226) or visit us at www.gracosaniforce.com
©2013 Graco Inc. Form No. 340264 Rev. F 06/13 Printed in the U.S.A.
Loading...