®
AirPro
Advanced Spraying Technology for Automotive, Metal, Wood,
Waterborne, High Wear and Adhesive Applications
AirPro Air Spray Gun
Advanced
Spraying Technology
The AirPro air spray gun delivers
exceptional spray performance while
addressing your environmental and
operator concerns - whether you’re a
custom shop or a high volume
manufacturing facility.
• Optimize spray performance with our
cutting edge aircap and nozzle design
• Choose from a wide range of gun
models to meet the needs of your
specific application
• Maximize operator comfort with our
lightweight design, low trigger force
and ergonomic handle
• Reduce maintenance and downtime
with fewer gun parts
Versatile Aircaps
Meet the needs of your environment with three different air spray technologies. Graco’s AirPro gun has the
versatility and flexibility to accommodate a variety of applications to fit your spraying needs.
AirPro
Spray Gun
HVLP COMPLIANT CONVENTIONAL
FINISH QUALITY Good Better Best
TRANSFER EFFICIENCY High High Medium
FLUID FLOW Low Medium High
AIR FLOW High Low Low
Ultimate Spraying Excellence
Apply Superior Quality Finishes
With one of the best spray patterns in the industry, the AirPro
gun is a real stand-out!
• Even material distribution through the spray pattern for
optimum coverage
• Improved transfer efficiency through reduced air consumption
• Uniform air flow through reduced spray turbulence
• Enhanced atomization through material-specific aircaps
To test these key features, Graco uses multi-dimensional imaging
to measure material spray density and material distribution.
• Red indicates dense particles
• Blue indicates dispersed particles
As shown in the picture, an even blue pattern throughout is desired
at the spray target.
SUPERIOR QUALITY
This AirPro spray image uses technology
which automatically analyzes spray
pattern excellence – guaranteeing
outstanding finish quality.
Maximize Operator Comfort
and Increase Productivity
Ergonomically designed
for superior handling,
the AirPro guns maximize
productivity by minimizing
operator fatigue and discomfort:
•
Well balanced and lightweight
(410 grams) gun makes it easier
to spray at a steady rate all day
•
Ultra-light trigger pull reduces
operator muscle stress
•
Ergonomic gun handle provides
a comfortable grip
•
Rounded control knobs for
operator comfort
ERGONOMIC
Applications
Wood
Aircaps and nozzles are specifically designed for wood
finishing applications that require uniform material
distribution at low pressures.
• Stains
• NGRs
• Toners
Needle/nozzle sizes available in 0.020”,
0.030” and 0.040” (0.5, 0.8, and 1.0 mm).
Waterborne
Aircaps designed to spray environmentally friendly
waterborne materials even with high solids content.
• Lacquers
• UV materials
• Paints
Needle/nozzle sizes available in 0.030”,
0.042” and 0.055” (0.8, 1.1, and 1.4 mm).
Adhesive
Unique aircaps designed for spraying waterborne
and solventborne adhesives and sealants.
For use in a variety of industries.
• Furniture
• Automotive
• Packaging
Needle/nozzle sizes in 0.051” and 0.70”
(1.3 and 1.8 mm).
General Metal
The AirPro gun is ideal for metal parts fabricators and metal
finishing shop operations requiring high quality paint jobs.
Works well with a wide variety of industrial coatings.
• Urethanes
• Epoxies
• Latex
• 2 component materials
Needle/nozzle sizes range from 0.020”
up to 0.110” (0.5-2.8 mm).
High Wear
These guns are designed with a carbide nozzle and
needle tip for long life with abrasive materials.
• Enamels
• Ceramics
• Metallics
• High solids
CARBIDE NEEDLE/NOZZLE
Available in 4 needle/nozzle sizes, 0.059”, 0.070”, 0.086”
and 0.110” (1.5, 1.8, 2.2 and 2.8 mm).
Automotive
Whether painting a car, motorhome, truck or bus,
the AirPro spray gun provides excellent atomization for
Class A finishes.
It is optimized to paint:
• Base coats
• Clear coats
• Primers
Needle/nozzle sizes from 0.030” to 0.055”
(0.8-1.4 mm).
Triton Packages
High Performance Finishing!
Bold Union of
Superior Finish Quality
• Consistent pattern and film on parts.
• Constant flow to the spray gun.
TRITON pump provides 50% less pressure
pulsation than standard diaphragm pumps.
Note: Pump-to-pump comparison without fluid regulator
Quality pumps enhance any
finishing system. Paired with AirPro
spray guns, the TRITON air-operated
diaphragm spray package applies
a high quality, decorative finish to
wood and metal parts.
Triton is a more effective alternative to traditional
pressure pots and standard diaphragm pumps.
High Quality Finish
Low pulsation output and smooth
pump changeover deliver a
consistent spray pattern.
Easy-to-use
Quick color
changes and fast
material refills save
time and money.
Performance
and Comfort
Combine spraying excellence with operator comfort and
many other clever innovations, and you get the AirPro air
spray gun from Graco. Ergonomically designed for superior
handling, the AirPro guns have a soft, controlled and
adjustable spray pattern with less overspray.
1
1. Aircaps in three air spray
technologies to fit the needs
of your environment
2. Two piece needle with replaceable
tip reduces operating costs
3. Quick turn retaining ring
which captures aircap
upon disassembly
4. Long life needle packing for
reduced downtime
2
3
Rugged
Construction
Stainless steel or aluminum
pump handles a wide
variety of fluids.
5. Ultra-light trigger pull reduces
operator fatique
6. Inlet pressure adjustment (cheater)
valve increases spraying flexibility
7. Air flow consumption designed to
meet environmental compliance
8. Uniform air flow for reduced turbulence
9. Ergonomic knobs provide excellent
operator comfort
10. One of the lightest weight (410 grams)
guns in its category
10
AIRPRO
9
5
PRESSURE FEED
®
FEATURES
4
8
7
AVAILABLE IN 3 FEED TYPES
GRAVITY FEED
SIPHON FEED
6
Ordering Information
How To Order:
1
Determine feed (pressure, gravity or siphon)
2
If pressure feed, identify application type
3
Select spray type (conventional, HVLP or compliant)
4
Select material viscosity
5
Select average flow rate
MATERIAL VISCOSITY
Light
Light-Medium
Medium
Medium-Heavy
Heavy
VISCOSITY (centipoise)
5-15
15-30
30-70
70-100
>100
PRESSURE FEED
General Metal Spray Guns
Part Nozzle Material Flow Needle/
Number Spray Type
288726 Conventional 0.020 (0.5) light 4-8 (0.12-0.24) 289773 289458
288929 Conventional 0.030 (0.8) light 4-12 (0.12-0.35) 289773 289459
288930 Conventional 0.042 (1.1) light-medium 8-20 (0.24-0.59) 289773 289460
288931 Conventional 0.055 (1.4) medium 16-30 (0.47-0.89) 289773 289462
288932 Conventional 0.070 (1.8) medium-heavy 16-35 (0.47-1.04) 289784 289464
288933 Conventional 0.086 (2.2) medium-heavy 16-40 (0.47-1.18) 289068 289466
288934 Conventional 0.110 (2.8) heavy 16-45 (0.47-1.33) 289069 289467
288935 HVLP 0.020 (0.5) light 4-8 (0.12-0.24) 289041 289458
288936 HVLP 0.030 (0.8) light 4-10 (0.12-0.30) 289041 289459
288937 HVLP 0.042 (1.1) light-medium 6-12 (0.18-0.35) 289041 289460
288938 HVLP 0.055 (1.4) medium 12-18 (0.36-0.53) 289041 289462
288939 HVLP 0.070 (1.8) medium-heavy 16-20 (0.47-0.59) 289041 289464
288940 HVLP 0.086 (2.2) medium-heavy 18-22 (0.53-0.65) 289070 289466
288941 HVLP 0.110 (2.8) heavy 20-24 (0.59-0.71) 289043 289467
288942 Compliant 0.020 (0.5) light 4-8 (0.12-0.24) 289042 289458
288943 Compliant 0.030 (0.8) light 4-10 (0.12-0.30) 289042 289459
288944 Compliant 0.042 (1.1) light-medium 6-12 (0.18-0.35) 289042 289460
288945 Compliant 0.055 (1.4) medium 12-18 (0.36-0.53) 289042 289462
288946 Compliant 0.070 (1.8) medium-heavy 16-20 (0.47-0.59) 289042 289464
288947 Compliant 0.086 (2.2) medium-heavy 18-22 (0.53-0.65) 289044 289466
288948 Compliant 0.110 (2.8) heavy 20-24 (0.59-0.71) 289045 289467
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
General Metal with Stainless Steel Tip
Part Nozzle Material Flow Needle/
Number Spray Type
288949 Conventional 0.042 (1.1) light-medium 8-20 (0.24-0.59) 289773 289461
288950 Conventional 0.055 (1.4) medium 16-30 (0.47-0.89) 289773 289463
288951 Conventional 0.070 (1.8) medium-heavy 16-35 (0.47-1.04) 289784 289465
288952 HVLP 0.042 (1.1) light-medium 8-14 (0.24-0.41) 289041 289461
288953 HVLP 0.055 (1.4) medium 12-16 (0.36-0.53) 289041 289463
288954 HVLP 0.070 (1.8) medium-heavy 16-20 (0.47-0.59) 289041 289465
288955 Compliant 0.042 (1.1) light-medium 8-14 (0.24-0.41) 289042 289461
288956 Compliant 0.055 (1.4) medium 12-18 (0.36-0.53) 289042 289463
288957 Compliant 0.070 (1.8) medium-heavy 16-20 (0.47-0.59) 289042 289465
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
Automotive Applications
Part Nozzle Material Flow Needle/
Number Spray Type
288929 Conventional 0.030 (0.8) light 4-12 (0.12-0.35) 289773 289459
288930 Conventional 0.042 (1.1) light-medium 8-20 (0.24-0.59) 289773 289460
24D472 Conventional 0.042 (1.1) light-medium 8-20 (0.24-0.59) 289040 289460
288931 Conventional 0.055 (1.4) medium 16-30 (0.47-0.89) 289773 289462
289034 HVLP 0.040 (1.0) light 6-12 (0.18-0.35) 289771 289468
289035 HVLP 0.047 (1.2) light-medium 10-14 (0.30-0.41) 289771 289469
289541 HVLP 0.055 (1.4) medium 12-18 (0.36-0.53) 289771 289495
289036 Compliant 0.040 (1.0) light 6-12 (0.18-0.35) 289772 289470
289037 Compliant 0.047 (1.2) light-medium 10-14 (0.30-0.41) 289772 289471
289542 Compliant 0.055 (1.4) medium 12-18 (0.36-0.53) 289772 289497
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
PRESSURE FEED
Wood Applications
Part Nozzle Material Flow Needle/
Number Spray Type
288958 Conventional 0.020 (0.5) light 4-8 (0.12-0.24) 288862 289472
288959 Conventional 0.030 (0.8) light 4-12 (0.12-0.35) 288862 289473
289109 Conventional 0.040 (1.0) light 8-20 (0.24-0.59) 288862 289474
288960 HVLP 0.020 (0.5) light 4-8 (0.12-0.24) 288864 289472
288961 HVLP 0.030 (0.8) light 4-10 (0.12-0.30) 288864 289473
289110 HVLP 0.040 (1.0) light 6-12 (0.18-0.35) 288864 289474
288962 Compliant 0.020 (0.5) light 4-8 (0.12-0.24) 288863 289472
288963 Compliant 0.030 (0.8) light 4-10 (0.12-0.30) 288863 289473
289111 Compliant 0.040 (1.0) light 6-12 (0.18-0.35) 288863 289474
High Wear Applications
Part Nozzle Material Flow Needle/
Number Spray Type
288973 Conventional 0.059 (1.5) medium 16-35 (0.47-0.95) 288861 289478
288974 Conventional 0.070 (1.8) medium-heavy 16-35 (0.47-1.04) 289049 289479
288975 Conventional 0.086 (2.2) medium-heavy 16-40 (0.47-1.18) 289049 289480
289982 Conventional 0.110 (2.8) heavy 16-45 (0.47-1.33) 289049 289980
288976 HVLP 0.059 (1.5) medium 14-18 (0.41-0.53) 289115 289481
288977 HVLP 0.070 (1.8) medium-heavy 16-20 (0.47-0.59) 289325 289482
288978 HVLP 0.086 (2.2) medium-heavy 18-22 (0.53-0.65) 289325 289483
289983 HVLP 0.110 (2.8) heavy 20-24 (0.59-0.71) 289325 289981
288979 Compliant 0.059 (1.5) medium 14-18 (0.41-0.53) 289050 289481
288980 Compliant 0.070 (1.8) medium-heavy 16-20 (0.47-0.59) 289327 289482
288981 Compliant 0.086 (2.2) medium-heavy 18-22 (0.53-0.65) 289327 289483
289984 Compliant 0.110 (2.8) heavy 20-24 (0.59-0.71) 289327 289981
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
Waterborne Applications
Part Nozzle Material Flow Needle/
Number Spray Type
288964 Conventional 0.030 (0.8) light 4-12 (0.12-0.35) 289046 289475
288965 Conventional 0.042 (1.1) light-medium 8-20 (0.24-0.59) 289046 289476
288966 Conventional 0.055 (1.4) medium 16-30 (0.47-0.89) 289046 289477
288967 HVLP 0.030 (0.8) light 4-10 (0.12-0.30) 289047 289475
288968 HVLP 0.042 (1.1) light-medium 8-14 (0.24-0.41) 289047 289476
288969 HVLP 0.055 (1.4) medium 12-18 (0.36-0.53) 289047 289477
288970 Compliant 0.030 (0.8) light 4-10 (0.12-0.30) 289048 289475
288971 Compliant 0.042 (1.1) light-medium 8-14 (0.24-0.41) 289048 289476
288972 Compliant 0.055 (1.4) medium 12-18 (0.36-0.53) 289048 289477
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
Adhesive Applications
Part Nozzle Material Flow Needle/
Number Spray Type
288982 Conventional 0.051 (1.3) medium 14-25 (0.41-0.74) 289051 289484
288983 Conventional 0.070 (1.8) medium-heavy 16-35 (0.47-1.04) 289051 289485
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
Spatter Applications
Part Nozzle Material Flow Needle/
Number Spray Type
288985 HVLP 0.042 (1.1) light-medium 8-14 (0.24-0.41) 289053 289460
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
Air Brush Applications
Part Nozzle Material Flow Needle/
Number Spray Type
24F202 Conventional 0.042 (1.1) light-medium 8-14 (0.24-0.41) 24D705 289460
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
Ordering Information
GRAVITY FEED
Without Cup
Part Nozzle Material Flow Needle/
Number Spray Type
289002 Conventional 0.055 (1.4) light-medium 4-10 (0.12-0.30) 289773 289493
289003 Conventional 0.070 (1.8) light-medium 8-12 (0.24-0.36) 289773 289494
289005 HVLP 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289771 289495
289006 HVLP 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289771 289496
289008 Compliant 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289772 289497
289009 Compliant 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289772 289498
With Plastic Gravity Cup
Part Nozzle Material Flow Needle/
Number Spray Type
289011 Conventional 0.055 (1.4) light-medium 4-10 (0.12-0.30) 289773 289493
289012 Conventional 0.070 (1.8) light-medium 8-12 (0.24-0.36) 289773 289494
289014 HVLP 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289771 289495
289015 HVLP 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289771 289496
289017 Compliant 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289772 289497
289018 Compliant 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289772 289498
With 3M™ PPS™ Cup
Part Nozzle Material Flow Needle/
Number Spray Type
289020 Conventional 0.055 (1.4) light-medium 4-10 (0.12-0.30) 289773 289493
289021 Conventional 0.070 (1.8) light-medium 8-12 (0.24-0.36) 289773 289494
289023 HVLP 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289771 289495
289024 HVLP 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289771 289496
289026 Compliant 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289772 289497
289027 Compliant 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289772 289498
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
SIPHON FEED
Without Siphon Cup*
Part Nozzle Material Flow Needle/
Number Spray Type
289991 Conventional 0.055 (1.4) light-medium 4-10 (0.12-0.30) 289769 289487
289992 Conventional 0.070 (1.8) light-medium 8-12 (0.24-0.36) 289769 289488
289993 HVLP 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289435 289489
289994 HVLP 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289435 289490
289995 Compliant 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289768 289491
289996 Compliant 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289768 289492
* Purchase 3M™ PPS™ cup or aluminum cup separately
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
With Metal Siphon Cup
Part Nozzle Material Flow Needle/
Number Spray Type
289028 Conventional 0.055 (1.4) light-medium 4-10 (0.12-0.30) 289769 289487
289029 Conventional 0.070 (1.8) light-medium 8-12 (0.24-0.36) 289769 289488
289030 HVLP 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289435 289489
289031 HVLP 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289435 289490
289032 Compliant 0.055 (1.4) light-medium 3-5 (0.09-0.15) 289768 289491
289033 Compliant 0.070 (1.8) light-medium 4-6 (0.12-0.18) 289768 289492
in. (mm) Viscosity oz/min (l/min) Aircap Kit Nozzle Kit
NEEDLE TIP IDENTIFICATION
Select needle tips for the AirPro guns now have markings for identification.
The PEEK tips have grooves at the base to indicate its size.
5-Pack Part Needle Tip Size # of
Number in (mm) Grooves
289350 0.020 (0.5) 1
288183 0.030 (0.8) 2
288184 0.040-0.042 (1.0-1.1) 3
288185 0.051-0.055 (1.3-1.4) 4
288187 0.070 (1.8) 5
288984 Siphon Conv/Compliant 6
289001 Gravity and Siphon HVLP 7
Tips without Grooves
5-Pack Part Needle Tip Size Material of
Number in (mm) Construction
289004 0.086 (2.2) PEEK
289007 1.10 (2.8) PEEK
24E484 0.030 (0.8) Stainless Steel
289010 0.042 (1.1) Stainless Steel
289013 0.055-0.070 (1.4-1.8) Stainless Steel
Accessories & Technical Specifications
HOSE
239631 4 ft (1.2 m) Air Whip Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 5/16 in (7.9 mm) Swivel: 1/4 npsm(f), nitrile
239636 15 ft (4.6 m) Air Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 5/16 in (7.9 mm) Swivel: 1/4 npsm(f), nitrile
239637 25 ft (7.6 m) Air Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 5/16 in (7.9 mm) Swivel: 1/4 npsm(f), nitrile
239655 Air Swivel Inlet Fitting
239622 4 ft (1.2m) Fluid Whip Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 3/16 in (4.8 mm). 3/8 npsm(fbe), nylon with
polyurethane cover
239633 15 ft (4.6 m) Fluid Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 3/16 in (4.8 mm). 3/8 npsm(fbe), nylon with
polyurethane cover
239634 25 ft (7.6 m) Fluid Hose Assembly
Max. working pressure: 100 psi (0.7 MPa, 7 bar).
ID: 3/16 in (4.8 mm). 3/8 npsm(fbe), nylon with
polyurethane cover
AIR VALVES
234784 Air Control Valve Kit (Cheater Valve) with Gauge
Attaches to any HVLP spray gun for precise air pressure
setting with a 0-160 psi gauge
235119 Gun Air Regulator Assembly 0-100 psi
SIPHON FEED GUN KITS
24C173 0.086 in (2.2 mm) Conventional Aircap
24C175 0.086 in (2.2 mm) Conventional Needle
and Nozzle Kit
CLEANING KITS
105749 Cleaning Brush
111265 4 oz Gun Lubricant (non-silicone)
15C161 Ultimate Gun Cleaning Kit
Includes brushes and tools for maintenance
AIR PRESSURE VERIFICATION KIT
For use in checking aircap atomizing air pressure. Not to
be used for actual spraying. Note: To be HVLP compliant, the
atomizing air pressure must not exceed 10 psi (70 MPa, 0.7 bar).
ORIFICE SIZE IN INCHES (mm)
289563 General Metal 0.020 – 0.070 in (0.5 – 1.8 mm)
289564 General Metal 0.086 in (2.2 mm)
289565 General Metal 0.110 (2.8 mm)
289566 Wood
289567 Waterborne
289568 High Wear 0.059 in (1.5 mm)
289569 High Wear 0.070 – 0.086 in (1.8 – 2.2 mm)
289803 Automotive and Gravity Feed
289589 Siphon Feed
GRAVITY, SIPHON AND PRESSURE CUPS
289770 23 oz (650 cc) Gravity Cup, Plastic
289797 23 oz (650 cc) Gravity Cup, Aluminum
289802 34 oz (1 l) Gravity Cup, Aluminum
192407 Gravity Cup Holder
244130 1 qt (0.9 l) Siphon Cup, Aluminum
239802 1 qt (0.9 l) SST Pressure Cup with Single
Air Regultor
Includes a pressure relief valve and a single cup air
regulator and gauge.
239803 1 qt (0.9 l) SST Pressure Cup with Double
Air Regulator
Includes a pressure relief valve, a 0-100 psi (0-0.7
MPa, 0-7 bar) air regulator for gun atomization, and 0-15
psi (0-104 kPa, 0-1.0 bar) air regulator for the cup air
supply.
239804 1 qt (0.9 l) Remote SST Pressure Cup
Includes air pressure regulator and gauge, 4 ft (1.2 m)
length air and fluid hose with 1/4 npsm(f) swivel ends,
pressure relief valve and rigid hook handle.
288776 2 qt (1.9 l) Remote Aluminum Pressure Cup
240266 Disposable Polyethylene Cup Liners
1 qt (0.9 l) capacity, paint and solvent resistant. Must be
used with pressure and siphon cups. 40 liners.
3M’s PPS™ Paint Preparation
System Accessories from Graco
For use with gravity and siphon feed guns
6 oz (150 ml) 3M
234941 Cup and Collar (box of 8)
234940 Lid and Liner (box of 50)
234942 Measurement Insert (box of 50)
25 oz (650 ml) 3M
234771 Cup and Collar (box of 8)
234772 Lid and Liner (box of 50)
15F531 Measurement Insert (box of 100)
32 oz (850 ml) 3M
234937 Cup and Collar (box of 4)
234938 Lid and Liner (box of 25)
234939 Measurement Insert (box of 100)
289486 Gravity Kit (25 oz)
One each: cup, collar, lid, liner, adapter
289795 3M
234773 Siphon Kit (25 oz)
One each: cup, collar, lid, liner, adapter
289405 3M
310693 Instruction Manual
™
™
PPS
™
™
PPS
™
™
PPS
™
PPS™ Gravity Feed Adapter
™
PPS™ Siphon Feed Adapter
Technical Specifications
Maximum Air Inlet Pressure ................................................100 psi (0.7 MPa, 7 bar)
Maximum Fluid Inlet Pressure ......................................... 300 psi (2.1 MPa, 21 bar)
Maximum HVLP/Compliant Inbound Air Pressure*
HVLP** ....................................................19-30 psi (0.1-0.21 MPa, 1.3-2.1 bar)
Compliant** .............................................29-35 psi (0.2-0.24 MPa, 2.0-2.4 bar)
Air Consumption
Conventional General Metal @ 36 psi (0.25 MPa, 2.5 bar) .................... 12.6 cfm
HVLP General Metal @ 19 psi (0.13 MPa, 1.3 bar) ............................... 14.9 cfm
Compliant General Metal @ 29 psi (0.2 MPa, 2.0 bar) .......................... 11.7 cfm
Fluid and Air Operating Temperature Range ............................32°-109°F (0°-43°C)
Weight .......................................................................................... 410 g (14.46 oz)
Air Inlet .................................................................................... 1/4 npsm (R1/4-19)
Fluid Inlet ................................................................................. 3/8 npsm (R3/8-19)
Wetted Parts ................................... 303 SST, 17-4 PH SST, PEEK, acetal, UHMWPE
Instruction manual
Pressure Feed ....................................................................................... 312414
Gravity Feed .......................................................................................... 312579
Siphon Feed .......................................................................................... 312578
* Produces 10 psi (0.07 MPa, 0.7 bar) spraying pressure at aircap
** Dependent on application type
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
GRACO LOCATIONS
MAILING ADDRESS
P.O. Box 1441
Minneapolis, MN 55440-1441
Tel: 612-623-6000
Fax: 612-623-6777
AMERICAS
MINNESOTA
Worldwide Headquarters
Graco Inc.
88 -11th Avenue N.E.
Minneapolis, MN 55413
EUROPE
BELGIUM
European Headquarters
Graco N.V.
Industrieterrein-Oude Bunders
Slakweidestraat 31
3630 Maasmechelen,
Belgium
Tel: 32 89 770 700
Fax: 32 89 770 777
ASIA PACIFIC
AUSTRALIA
Graco Australia Pty Ltd.
Suite 17, 2 Enterprise Drive
Bundoora, Victoria 3083
Australia
Tel: 61 3 9468 8500
Fax: 61 3 9468 8599
CHINA
Graco Hong Kong Ltd.
Shanghai Representative Office
Building 7
1029 Zhongshan Road South
Huangpu District
Shanghai 200011
The People’s Republic of China
Tel: 86 21 649 50088
Fax: 86 21 649 50077
INDIA
Graco Hong Kong Ltd.
India Liaison Office
Room 443, Augusta Point
Regus Business Centre 53
Golf Course Road
Gurgaon, Haryana
India 122001
Tel: 91 124 435 4208
Fax: 91 124 435 4001
JAPAN
Graco K.K.
1-27-12 Hayabuchi
Tsuzuki-ku
Yokohama City, Japan 2240025
Tel: 81 45 593 7300
Fax: 81 45 593 7301
KOREA
Graco Korea Inc.
Shinhan Bank Building
4th Floor #1599
Gwanyang-Dong, Dongan-Ku,
Anyang-si, Korea 431-060
Tel: 82 31 476 9400
Fax: 82 31 476 9801
SALES/
DISTRIBUTION/
SERVICE
North America
Customer Service
800-328-0211
Fax 877-340-6427
Call today for product information or to request a demonstration.
877-84GRACO (1-877-844-7226) or visit us at www.graco.com.
Graco Inc. is registered to I.S. EN ISO 9001
©2013 Graco Inc. 339377 Rev. E 05/13 All written and visual data contained in this document are based on the latest product information available at the time
of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification purposes and
are trademarks of their respective owners.
Loading...