Graco 338589EN-D User Manual

ADVANCED

TECHNOLOGY

SaniForce

Bin Evacuation Systems for the Sanitary Industry

Evacuate viscous products from 300-gallon (1,135 l) containers without dilution

• Extremely fast evacuation with flow rates up to 300 gpm (1,135 lpm)

• Designed with inflatable wiper seals for increased efficiency and faster change-out of bins

• Unique floating ram plate eliminates the need for exact positioning of bin under the ram plate

• Available in manual and electronic control options

Ordering Information

SANIFOR C E BES

Max. Working Fluid BES Part No.

BESA4C 400 (28, 2.8) 24G742 2 SaniForce 5:1 Manual Pallecon BESA7A 400 (28, 2.8) 24G742 2 SaniForce 5:1 Electronic Plywood BESA7C 400 (28, 2.8) 24G742 2 SaniForce 5:1 Manual Plywood BESA7F 400 (28, 2.8) 24G742 2 SaniForce 5:1 Electronic Plywood BESB7B 400 (28, 2.8) 24G742 4 SaniForce 5:1 Electronic Plywood BESB7D 400 (28, 2.8) 24G742 4 SaniForce 5:1 Manual Plywood BESAAC 410 (28.3, 2.8) 24G742 2 SaniForce 5:1 Manual Buckhorn BESE1A 1200 (83, 8.3) 24F625 2 SaniForce 12:1 Electronic Arena BESE1C 1200 (83, 8.3) 24F625 2 SaniForce 12:1 Manual Arena BESE5C 1200 (83, 8.3) 24F625 2 SaniForce 12:1 Manual Pallecon BESF6B 1200 (83, 8.3) 24F625 4 SaniForce 12:1 Electronic Arena BESF6D 1200 (83, 8.3) 24F625 4 SaniForce 12:1 Manual Arena BESF9B 1200 (83, 8.3) 24F625 4 SaniForce 12:1 Electronic TNT BESF9D 1200 (83, 8.3) 24F625 4 SaniForce 12:1 Manual TNT BESE7C 1450 (100.4, 10.1) 24F625 2 SaniForce 12:1 Manual Plywood BESEAC 1450 (100.4, 10.1) 24F625 2 SaniForce 12:1 Manual Buckhorn BESF7D 1450 (100.4, 10.1) 24F625 4 SaniForce 12:1 Manual Plywood

Note: Systems can be special ordered for bin types other than plywood. Contact your sales rep for additional information.

SANIFOR C E 3150 BES

Part No. Type Bin Manuf. Control Type Outlet Size Diaphragm /Ball Material**

BES3P3 Ball Plywood Manual 3 in (76 mm) Santoprene/ PTFE BES3P1 Ball Plywood Electronic 3 in (76 mm) Santoprene/ PTFE BES4P3 Flapper Plywood Manual 3 in (76 mm) Santoprene/ N/A BES8B3 Ball Pallecon Manual 3 in (76 mm) Overmolded EPDM BES3A1 Ball Arena Electronic 3 in (76 mm) Santoprene/ PTFE BES4A1 Flapper Arena Electronic 3 in (76 mm) Santoprene/ N/A BES3F3 Ball Tetrapak Manual 3 in (76 mm) Overmolded EPDM/PTFE

Note: Contact marketing for ordering information on non-plywood bins. **3A Approved EPDM diaphragm is available for heavy duty applications.

Pressure per pump

psi (bar, MPa)

Pump Part No.

Pump Quantity Pump Description

Control Type

BIN Manuf.

Additional Pumps and Packages

Graco offers the most complete

range of pumps, packages

and systems to meet all of

your application and cleaning

requirements. Whether the

material you use comes in pails,

drums, bins, totes or tankers,

Graco pumps and cleaning

systems are designed to provide

years of reliable service!

Technical Specifications

SANIFOR C E BES

BES Part No. BESAxx BESBxx BESExx BESFxx

Max. working ﬂuid pressure Compressed air requirement

Pneumatic control panel speciﬁcations

Max. inlet air pressure Air inlet size 3/4 in npt(f) 3/4 in npt(f) 3/4 in npt(f)

Air inlet pump 1/2 in npt(f) 1/2 in npt(f) 1/2 in npt(f) Fluid Displacement (each pump) Max. Flow @ 60 cpm* 28 gpm

Pressure ratio 5:1 12:1 12:1 Air consumption @ 40 psi (each pump) Pump outlet 2 in tri-clamp 2 in tri-clamp 2 in tri-clamp Communication RS232 Serial RS232 Serial RS232 Serial Electrical requirements 110 VAC (60 Hz), 15A 110 VAC (60 Hz), 15A 110 VAC (60 Hz), 15A Overall dimensions in (m) Evacuation efﬁciency 2 pumps: 98%

Instruction manual 311163 311163 311163

* Flow rates based on full displacement of lower and S.G. = 1 Note: Graco’s BES packages are available for a variety of manufacturers’ bins and custom systems can be built upon request. Contact Graco at 1-800-543-0339 for more information.

400 psi (28 bar, 2.8 MPa) 80-100 psi (5.5-7 bar, 0.55-0.7 MPa)

80 psi (5.5 bar, 0.5 MPa)

0.23 gal/cycle (0.87 liter/cycle)

(106 lpm)

~2.95 scfm per gpm (2.8 bar, 0.28 MPa)

69 W x 60 D x 118.8 H (1.72 W x 1.52 D x 3.0 H)

4 pumps: 99%

54 gpm (204 lpm)

1200 psi (83 bar, 8.3 MPa) 80-100 psi (5.5-7 bar, 0.55-0.7 MPa)

100 psi (7 bar, 0.7 MPa) 100 psi (7 bar, 0.7 MPa)

0.14 gal/cycle (0.52 liter/cycle) 17 gpm (64 lpm) 34 gpm (128 lpm)

~7.5 scfm per gpm (2.8 bar, 0.28 MPa)

69 W x 60 D x 118.8 H (1.72 W x 1.52 D x 3.0 H) N/A N/A

1200 psi (83 bar, 8.3 MPa) 80-100 psi (5.5-7 bar, 0.55-0.7 MPa)

0.14 gal/cycle (0.52 liter/cycle)

~7.5 scfm per gpm (2.8 bar, 0.28 MPa)

78 W x 60 D x 118.8 H (1.98 W x 1.52 D x 3.0 H)

SANIFOR C E 3150 BES

3150 BES Part No. BES3xx BES4xx

Max. working ﬂuid pressure Compressed air requirement

Pneumatic control panel speciﬁcations

Max. inlet air pressure 120 psi (8.4 bar, 0.84 MPa) Air inlet size 3/4 in npt(f)

Air inlet pump 1/2 in npt(f) Fluid Displacement (each pump) Max. Flow @ 145 cpm* 300 gpm (1,135 lpm) Pressure ratio 1:1 Air consumption @ 70 psi (each pump) Pump outlet 3 in tri-clamp Max. suction lift 18 ft

Max. diaphragm operating temperature (Santoprene, 3A Approved EPDM) Typical sound level at 70 psi (4.9 bar) air @ 50 cpm Weight 3,000 lb (1,360 kg) Instruction manual 311163

* Flow rates are with muffler and slightly vary based on diaphragm

material. Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type.

120 psi (8.4 bar, 0.84 MPa) 80-120 psi (5.5-8.4 bar, 0.55-0.84 MPa)

1.03 gal/cycle (3.89 liter/cycle)

~0.8 scfm per gpm (4.8 bar, 0.48 MPa)

(5.5 m) wet

180ºF (82.2ºC), 275ºF (135ºC) 85 dBa

10 ft (3.0 m) wet

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.gracosaniforce.com