Graco 338499EN-F User Manual

Download

Page 1

ADVANCED

TECHNOLOGY

™

SaniForce

High Sanitation Air-Operated Double Diaphragm Pumps

Easy to clean, quick knockdown design

• Fluid contact areas are FDA-Compliant and meet CFR Title 21

3A Certified pump options to meet the sanitation requirements of the milk and dairy industry

•

• Featuring Graco’s durable, lube-free, non-sticking air valve

• Available in ball and flapper designs, with 1.5 inch, 2 inch, 3 inch and 4 inch tri-clamp connections

Page 2

Technical Specifications and Ordering Information

3150 Technical Specifications

Maximum fluid working pressure ............................. 120 psi (8.4 bar, 0.84 MPa)

Maximum free flow delivery* ............................................... 150 gpm (568 lpm)

Maximum suction lift - ball ..............................18 ft (5.5 m) wet, 9 ft (2.7 m) dry

Maximum suction lift - flapper .........................10 ft (3.0 m) wet, 5 ft (1.5 m) dry

Maximum size of pumpable solids

Ball .......................................................................................1 in (25.4 mm)

Flapper ...............................................................................2.5 in (63.5 mm)

Maximum diaphragm operating temperature

Santoprene ...........................................................................180ºF (82.2ºC)

Buna-N .................................................................................180ºF (82.2ºC)

PTFE ...................................................................................220ºF (104.4ºC)

Fluoroelastomer .....................................................................250ºF (121ºC)

EPDM .....................................................................................275ºF (135ºC)

Typical sound level at 70 psi air (4.9 bar) air @ 50 cpm ......................... 85 dBa

Air pressure operating range ....................................................... 20 to 120 psi

(1.4 to 8.4 bar, 0.14 to 0.84 MPa)

Air inlet size ...................................................................................... 1/2 npt(f)

Fluid inlet & outlet size

Weight ................................................................................... 145 lb (65.7 kg)

Instruction manual .............................................................................. 310622

* Flow rates are with muffler and do not vary based on diaphragm material. Displacement

per cycle may vary based on suction condition, discharge head, air pressure and fluid type.

(determined by part number)............ Tri-clamp connections

3150 High Sanitation Pumps

3A Pump with Leak Detector

Inlet/ Part No. Type Outlet Size Diaphragm Ball

SA1AAA 3A Approved 1.5 in x 1.5 in Overmolded EPDM PTFE SA2AAA 3A Approved 2 in x 2 in Overmolded EPDM PTFE SA3AAA 3A Approved 3 in x 3 in Overmolded EPDM PTFE SA4AAA 3A Approved 4 in x 4 in Overmolded EPDM PTFE SA5AAA 3A Approved 3 in x 2 in Overmolded EPDM PTFE

Sanitary Ball Pump

Inlet/ Part No. Type Outlet Size Diaphragm Ball

SA13A1 Ball 1.5 in x 1.5 in Overmolded PTFE/EPDM PTFE SA23A1 Ball 2 in x 2 in Overmolded PTFE/EPDM PTFE SA33A1 Ball 3 in x 3 in Overmolded PTFE/EPDM PTFE SA43A1 Ball 4 in x 4 in Overmolded PTFE/EPDM PTFE SA53A1 Ball 3 in x 2 in Overmolded PTFE/EPDM PTFE SA3361 Ball 3 in x 3 in Overmolded PTFE/EPDM Santoprene SA3AA1 Ball 3 in x 3 in Overmolded EPDM PTFE SB3AA1 Ball 3 in x 3 in Overmolded EPDM PTFE SB2661 Ball 2 in x 2 in Santoprene Santoprene SB3661 Ball 3 in x 3 in Santoprene Santoprene SB2771 Ball 2 in x 2 in Buna-N Buna-N SB3771 Ball 3 in x 3 in Buna-N Buna-N SB2881 Ball 2 in x 2 in Fluoroelastomer Fluoroelastomer SB3881 Ball 3 in x 3 in Fluoroelastomer Fluoroelastomer

Sanitary Flapper Pump

Inlet/ Part No. Type Outlet Size Diaphragm

SF3AF1 Flapper 3 in x 3 in Overmolded EPDM SF4AF1 Flapper 4 in x 4 in Overmolded EPDM SF36F1 Flapper 3 in x 3 in Santoprene SF46F1 Flapper 4 in x 4 in Santoprene SF37F1 Flapper 3 in x 3 in Buna-N SF47F1 Flapper 4 in x 4 in Buna-N SF38F1 Flapper 3 in x 3 in Fluoroelastomer SF48F1 Flapper 4 in x 4 in Fluoroelastomer

3150 Pump Accessories

16E975 Conversion kit: Ball to flapper, includes four flapper assemblies 15H461 Conversion kit 3A: Flapper to ball, includes four housing retainers; balls need to be ordered separately 15E285 Conversion kit: Flapper to ball, includes four housing retainers; balls need to be ordered separately 112361 Santoprene ball (order quantity four) 15B492 Buna-N ball (order quantity four) 112359 PTFE ball (order quantity four) 15B491 Fluoroelastomer ball (order quantity four) 253225 Santoprene diaphragm kit 253223 Buna-N diaphragm kit 253222 Fluoroelastomer diaphragm kit 253224 Overmolded EPDM diaphragm kit 15D990 Leak detector kit

1590 Technical Specifications

Maximum fluid working pressure ............................ 120 psi (8.4 bar, 0.84 MPa)

Maximum free-flow delivery ................................................ 90 gpm ( 340 lpm)

Maximum suction lift ................................ 28 ft (8.5 m) wet, 15 ft (4.57 m) dry

Maximum size pumpable solids .............................................. 5/8 in (15.9 mm)

Air pressure operating range ...................... 20-120 psi (14-8 bar, 014-08 MPa)

Maximum air consumption ................................................................ 125 scfm

Air consumption at 70 psi air inlet pressure/60 gpm ..............................50 scfm

Maximum pump speed ...................................................................... 200 cpm

* Gallons (liters) per cycle ................................................................. 0.5 (1.96)

**Maximum noise level at 100 psi, full flow ........................................... 90 dBa

**Sound power level .......................................................................... 103 dBa

**Noise level at 70 psi and 50 cpm....................................................... 85 dBa

Maximum fluid operating temperature is based on the following maximum diaphragm, ball, and seat temperature ratings.

PTFE .................................................................................... 220°F (104.4°C)

Santoprene ............................................................................ 180°F (82.2°C)

3A Approved EPDM ................................................................. 275°F (135°C)

Air inlet size .................................................................................. 0.5 in npt(f)

Weight .........................................................................................97 lb (44 kg)

Instruction manual .............................................................................. 310622

* Displacement per cycle may vary based on suction condition, discharge head,

air pressure and fluid type

** Noise levels measured with the pump mounted on the stand. Sound power measured

per ISO Standard 9614-1

1590 High Sanitation Pumps

Part Number Type Inlet/Outlet Ball Diaphragm

SABAAA 3A Approved 2 in x 2 in PTFE Overmolded EPDM SBBAAA Ball 2 in x 2 in PTFE Overmolded EPDM SBBA11 Ball 2 in x 2 in PTFE PTFE SABA13 Ball 2 in x 2 in PTFE Overmolded PTFE SBBA13 Ball 2 in x 2 in PTFE Overmolded PTFE SBBA22 Ball 2 in x 2 in Santoprene Santoprene

1590 Kits and Accessories

255122 Air valve repair kit 3A 255058 Overmolded EPDM diaphragm kit 255059 Santoprene diaphragm kit 255060 PTFE diaphragm kit 15D990 Leak detector 112421 Santoprene ball (quantity one) 112419 PTFE ball (quantity one)

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.gracosaniforce.com