Graco 338202EN-B User Manual

AL Automatic

Airless Spray Gun

Increase Production Speeds and Finish Quality in General Metal Applications

• Lightweight and compact rounded gun design

• Capable of handling high production speeds

• Durable stainless steel construction handles the toughest materials

• Fewer parts means an overall lower cost of repair

• Wide range tip line for a variety of applications

Technical Specifications and Ordering Information

Oriﬁce Size in (mm)

*Fluid Output, gpm (lpm)

at 600 psi

(4.1 MPa, 41 bar)

Maximum Pattern Width at 12 in (300 mm)

2 to 2.5

(50)

4 to 4.5

(100)

6 to 6.5

(150)

8 to 8.5

(200)

10 to 10.5

(250)

12 to 13

(300)

14 to 15

(350)

16 to 17

(400)

18 to 19

(450)

0.007 (0.178) 0.053 (0.20) 107 307

0.009 (0.229) 0.087 (0.33) 109 209 309

0.011 (0.279) 0.13 (0.49) 111 211 311 411 511 611

0.013 (0.330) 0.18 (0.69) 213 313 413 513 613 713

0.015 (0.381) 0.24 (0.91) 115 215 315 415 515 615 715 815

0.017 (0.432) 0.31 (1.17) 117 217 317 417 517 617 817 917

0.019 (0.483) 0.39 (1.47) 219 319 419 519 619 719 819

0.021 (0.533) 0.47 (1.79) 221 321 421 521 621 721 821 921

0.023 (0.584) 0.57 (2.15) 323 423 523 623 723 823 923

0.025 (0.635) 0.67 (2.54) 325 425 525 625 725 825 925

0.027 (0.686) 0.78 (2.96) 327 427 527 627 727 827 927

0.029 (0.737) 0.90 (3.42) 429 529 629 729

0.031 (0.787) 1.03 (3.90) 331 431 531 631 731 931

0.033 (0.838) 1.17 (4.42) 335 433 533 633 733 933

0.035 (0.889) 1.31 (4.98) 435 535 635 735

0.037 (0.940) 1.47 (5.56) 737

0.039 (0.991) 1.63 (6.18) 539 639

0.041 (1.041) 1.80 (6.83) 541 841

0.043 (1.092) 1.99 (7.51) 543 643

0.045 (1.143) 2.17 (8.23) 545

0.047 (1.197) 2.37 (8.98) 547

0.049 (1.245) 2.58 (9.76) 749

0.053 (1.35) 3.02 (11.4) 553

0.055 (140) 3.25 (12.3) 655

Ordering Information

288048 Airless Gun

Includes GG0 precision spray tip of choice and internal filter

Manifolds (required for gun installation)

241161 Standard 1/4” npsm inlets 244930 High flow ambient manifold

ACCESSORIES

288171 Air Seal Repair Kit

239896 Fluid Seal Repair Kit

210500 In-Line Fluid Filter

Techn

GG0 Tip Chart

Technical Specifications

Maximum fluid pressure . . . . . . . . . . . . . . .. . . . . . . . . . . 4000 psi (276 bar, 27.6 MPa)

Maximum working air pressure . . . . . . . . . . . . . .. . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)

Maximum cylinder air pressure . . . . . . . . . . . . .. . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)

Minimum air cylinder actuating pressure . . . . . . . . . . . . . . . . 70 psi (4.9 bar, 0.5 MPa)

Maximum working fluid temperature . . . . . . . .. . . . . . . .. . . . . . . . . . . . . . 140°F (60°C)

Triggering speed . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 50-70 msec (fully open or close)

Wetted parts . . . . . . . . .. . . . . . . stainless steel, carbide, UHMWPE, acetal, PEEK, PTFE

Gun weight . . . . . . .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 lb (545 g)

Dimensions . . . . .. . . 5.2 in L x 3.0 in H x 2.0 in W (135 mm L x 76 mm H x 51 mm W)

Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311053

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.

Call today for product information or to request a demonstration.

877.84GRACO (1-877-844-7226) or visit us at www.graco.com/finishing